Spraying valve - Import export

Compact and highly flexible. The spray valves as a compact combination of our nozzles with different spray patterns and the unrivalled valves of the JB series. The spray valves are perfectly suited for use with stationary nozzles such as forging rollers, cross wedge rollers or presses.

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Coating of pipings and air ducts, firing, boiler and heating systems, tanks, exhaust systems, silencers, light-metal bodies on utility vehicles Repairs to mechanically (stone impact) or chemically (de-icing salt) damaged aluminium rims Shielding of non-metallic materials, e.g. cardboard, wood, glass or plastics etc. Advantages and benefits Excellently suited for sole, decorative corrosion protection Universal protective and decorative coating for all materials Economical due to low consumption and self-cleaning spray valve High covering capacity Fast-drying

Decorative corrosion protection on the basis of zinc and aluminium powder as a second layer over zinc sprays (e.g. OKS 2511) for forming a weather-resistant surface with aluminium gloss. Repair of galvanising interrupted or damaged during welding, drilling or cutting without subsequent painting Suitable as a decorative glossier coating than at normal zinc sprays Advantages and benefits Highly effective due to proven formula with high percentages of zinc and aluminium Combines outstanding zinc protection with decorative aluminium gloss Can be welded through well Economical due to low consumption and self-cleaning spray valve

Spit nozzle SD 17: version for pin-point and linear application The pneumatically operated SD 17 is also available as a spit nozzle version. The fully spray valve has been specifically developed for pin point and linear application of oils, release agents and other low-viscosity media; it maintains its precision at certain distances between the nozzle and the application object. The spit nozzle SD 17 is particularly suitable for precision lubrication tasks of components and tools; it can also be setup for higher viscosities via an optionally selectable heating unit.

Touching-up damaged points on galvanised surfaces, for example after welding, drilling or cutting processes Priming of ferrous metals when zinc galvanising cannot be carried out. For example, in vehicle and ship repairs, in steel building construction, civil engineering and bridge building, in tank and overhead line construction, on grids, fence and traffic signal posts, exhaust systems, drain gutters Also suitable for spot welding thanks to the good electrical conductivity Advantages and benefits Highly effective due to active, cathodic corrosion protection Versatile use as durable corrosion protection at thermally stressed metal parts Highly economical due to low consumption and self-cleaning spray valve Supplements galvanising and forms a rough adhesive surface for subsequent painting

A Steam Conditioning Valve / Combined PRDS Valve is the combination of pressure reduction and temperature reduction of superheated steam to fit process needs, protect downstream equipment or allow the use of less expensive materials or schedules for downstream piping. This is done with a pressure reducing valve and a spray water addition section either as separate units or a single device. Pressure reduction is carried out with a pressure reducing trim within the valve body, usually multi stage pressure reduction. The pressure is controlled by an upstream or downstream pressure controller, signaling the valve to modulate to maintain the pressure at the required set point.Temperature is controlled by adding water to the steam in such away that it will get fully evaporated in the steam, termed as desuperheatmg. These applications are normally considered to be some of the most severe services of any valves in a modem steam plant.

Jet Flow multi orifice desuperheater regulates the amount of injected water by varying the number of orifices during operation. The ensures that the spray water pressure remains constant at all loads and an excellent and almost uniform spray quality is achieved over the full operating range, thereby minimising the tendency of spray water to accumulate in the steam line. Opening of the orifices is regulated by the positioning of a piston operated actuator directly mounted on the desuperheater. This compact and simple design ensures no separate spray water Injection control valve is required.

ERC Throttle/Butterfly Valve Cleaning Spray breaks down stubborn impurities in the carburettor system and prevents major repairs. THE EFFECT Deposits and impurities in the intake and throttle valve area impair the function of the carburettor system and increase the risk of corrosion and expensive repairs. THE ADVANTAGES AT A GLANCE - Removes soiling in the intake and throttle valve area - Cleans grease, dirt, and oil residue, as well as rubber abrasion off of metal surfaces - Can be used on (carburettor) linkages, cable wire passages and metal bearings

EMA basket strainers are being used where the line can be shut down for short periods to clean or change the baskets. EMA standard fabricated pipeline strainers meet customers’ expectations and the highest standards. EMA pipeline basket strainers are being used in piping applications where a greater screen area to pipe area ratio is required. By providing a greater screen area than a Y-strainer, you are optimizing the total open area and minimizing potential pressure loss through the basket. EMA strainers are used to protect pipelines, valves, and spray nozzles from water flow problems. They reduce the necessity for frequent cleaning and provides a cost and time saving benefit with less downtime.

SCHÜTZE spray valve KA 2 - NA Details as for KA 2 Additional equipped with a proximity switch for control of needle (open/close). nozzle and needle : stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5mm Ø

SCHÜTZE spray valve KA 2/Airless The automatic spray valve KA 2/Airless is an airless spray valve. The fluid will be squeezed through the spray valve and thereby atomized. Because of it´s low weight and the small measurements the KA 2/Airless is ideal for all applications with low space requirements. needle seat and needle: stainless steel

SCHÜTZE AIRLESS-spray valve S 830 Spray valve without atomizing air. Connections of valve on under-side. Control of S 830 via external pneumatic valves. Max. material pressure: 250 bar All standard airless nozzles can be fitted to the S 830. needle seat and needle : tungsten carbide

SCHÜTZE extrusion valve MVV The mini extrusion valves of series MVV are designed for the application of oils, release agents and other thin liquids. The application can be done punctiform or linear. nozzle + needle: stainless steel available nozzle dimensions: 0,2/0,3/0,4/0,5/0,6/0,8 mm Ø

SCHÜTZE Extrusionsventil MMKD 50 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). The extreme short control air distances and the high speed solenoid gives this valve very fast and exact needle intermission cycles up to 200 cycles per second. nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDV/MV (LV/KV) Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMKD 30 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDD LV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle : stainless steel needle : tungsten carbide available nozzle dimensions : 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDV and MMDV LV/KV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE spray valve GF / 5 with quick release adapter Designed for spraying colours, paints etc. Spray angle can be regulated individually by separate air connection from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø Also available in HVLP-technique