Stainless-steel profiles - Import export

The twisting or torsion of the extruded aluminium, stainless steel, brass or iron profiles is carried out via a clockwise (or counter clockwise) solicitation of the cross section against its axis. In order to avoid that this twisting jeopardizes the stiffening rib, we use a filling system to help the stretching and the compression of the fibres. We are able to twist up to 9 mt profiles!

Manufactured qualities : 304, 304L, 316, 316L, 316Ti, 321, 409, 409L, 430, 430Ti, 436, 439 ( according to AISI norm )manufacture norm : DIN 17455, DIN 17457 Measure and tolerance norm: EN ISO 1127 Production interval stainless steel pipe : 9x0.6mm – 114x4,0mm> Production interval stainless steel profil : 10x10mm – 80x80mm Surface process. Processless. 180 - 220 - 320 - 440 Sand grinding. onur@ucelsteel.com

Polypropylene feeder for grids in bioreactors and degreasing tanks Suitable for both municipal and industrial wastewater treatment plants. Allows the installation of Aquadisc® 250 / 305 / 320 and Aquatube® 70 diffusers. Diffusers are known for their excellent temperature resistance, recyclability, and longevity. Glass Fibre reinforced polypropylene feeder. Noemi® module body, highly resistant to chemical and abrasive attack - standard length tubes of 2 m, which can be designed to fit many tanks configurations Polypropylene support and fixing brackets mounted on stainless steel anchor rods - the profiled shape of the bracket allows the module body to be locked in rotation and ensures its stability in the tank All stainless-steel fixi Drain plug

Sturdy and practical galvanized or stainless steel linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The shaped raceway rail, the flat raceway rail and the telescopic rail are available in stainless steel or galvanized sheet metal. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces. Three rail width sizes: 20mm, 30mm and 45mm Standard rail lengths up to 3,120mm; different lengths upon request Low coefficient of friction Combination of T and U rails for self-aligning bearing applications Easily adjustable slider preload Polymer based wipers available for added roller bearing protection (available on for the thin body style slider) High temperature resistance up to 120°C/250°F The stainless steel X-Rail linear guide version is corrosion resistant, and ensures...

Sturdy and practical linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The linear guides with shaped raceways and the linear guides with flat raceways are available in stainless steel or galvanised or nitrided metal sheeting. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces.

WFP-PRO SERIES SCALES U-PROFILE - TRANSPORTABLE - INDICATOR EXCLUDED Pallet weighing scales with low U-profile. They are suitable for rapid weighing of goods on pallets and can be easily handled in workshops and warehouses. CE-M approved The scales are available in RAL 5007 painted steel or in AISI 304 stainless steel. TECHNICAL FEATURES: - Functioning with 4 shear-beam load cells approved according to OIML R60 standards, with dust protection. - Oven-painted steel structure, RAL 5007 blue color. - Adjustable anti-shock adjustable feet, level bubble, 2 wheels and carrying handles. - Power supply 5/15 Vdc. - 5 m shielded cable complete with connectors for connection to the indicator. - The stainless steel scales have a height of 75 mm, articulated self-centering, non-slip and anti-vibration feet, adjustable in height and structure, mechanics, AISI304 stainless steel hardware and IP68 stainless steel load cells.

- Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in carbon steel or AISI 304 - Square section packing seal, compressed between two stainless steel profiles held in place by two aluminum flanges that allow easy access, maintenance and adjustment of the packing, even with the valve installed - Invitation hopper for the passage of the product - Given its compact and robust structure, it is also suitable for heavier applications with materials such as gravel, sand and coal - ATEX certified version upon request - Pneumatic, manual or motorized actuators

Product Introduction: load cells are available in the capacities from 5kg to 500kg. Alloy steel & stainless steel construction construction with single shear beam type. Sealed welding ,waterproof, anti-corrosion and suitable for all kinds of environment. Integral structure and easy installation. Suitable for electronic platform scale, hopper scales and other electronic weighing devices. Features: Capacity :5kg to 500kg Defend grade: IP67 & IP68 High accuracy. Alloy steel & stainless steel single shear beam Low profile and nice exterior

To fasten components to profiles, brakes the anodized coat of the profile - thus ensuring a safe, electrically conductive connection Material: — Steel — Stainless steel — Plastic PA Measures: Thread: M4 - M8 length hammer screw: 16-60 mm many different versions in lengths and widths in the delivery assortment individual designs on request extras: Rotation aid: polyamide spot coating on request surface: with dry sliding film, zinc-nickel or zinc-flake coating on request Note: Matching flange nut available

As a standard galvanized sheet of thickness 0,50 mm and RAL9002 polyester painted plates are made twisted on the folding machine. Sheet thicknesses can depend on the project. (0,80 mm, 1 mm). Uprofiles are manufactured according to the customer's request with special manufacturing option. PVC, 304 QUALITY STAINLESS STEEL are available. U profile is used on the floor. The COOLPAN panel floor is seated in the profile. L profile panel is used as an external accessory.

As a standard galvanized sheet of thickness 0,50 mm and RAL9002 polyester painted plates are made twisted on the folding machine. Sheet thicknesses can depend on the project. (0,80 mm, 1 mm) . Uprofiles are manufactured according to the customer's request with special manufacturing option. PVC, 304 QUALITY STAINLESS STEEL are available. U profile is used on the floor. The COOLPAN panel floor is seated in the profile.

The process of three-dimensional curving of aluminium, stainless steel, brass or iron profiles is carried out in two steps: torsion and bending. This is a very complex process, which only a high-skilled staff, with a technological equipment, can carry out.

As a standard galvanized sheet of thickness 0,50 mm and RAL9002 polyester painted plates are made twisted on the folding machine. Sheet thicknesses can depend on the project. (0,80 mm, 1 mm). Uprofiles are manufactured according to the customer's request with special manufacturing option. PVC, 304 QUALITY STAINLESS STEEL are available. U profile is used on the floor. The COOLPAN panel floor is seated in the profile.

PVC strip curtains are practical and economic systems which are made of transparent PVC material and used to separate work areas. PVC curtains can be used in cold air warehouses, frozen storage tanks, and in the company’s room passings. The strip curtains are used to provide heat and sound insulation in the area where they are installed and keep the industrial standard at the top level by protecting the working environment from the bird, from the beak, from all flying pest, from dust, from smoke and bad smell. PVC curtains are available in desired thicknesses and sizes (20, 30, 40 cm and 2, 3, 4 mm thick) and provide various mounting possibilities. If PVC curtains are damaged, it is easy to change and clean. According to different usage areas, PVC curtains are hanged on stainless steel or galvanized carrier profiles. The strip support components are made of special stainless steel and provide easy, quick installation in all types of door systems.

Can be used as a visual highlight Available in different surfaces Best Kraus-quality

Save the glass edge Optical finish of the glass Provides additional stability

Save the glass edge Optical finish of the glass Provides additional stability

ino XP 8000 is a Gantry type 4 axis CNC machining center for processing profiles. The Maxi-Steel type of extra strengthened machine body has a huge rigidity and flexibility in processing profiles of 350 mm X 350 mm in 0,1 mm / 1-meter precision and 80 mt./min X-Axis speed. With the heavy body and the gantry type of machining bridge, it is possible to process the heaviest aluminium profiles, even hardened steel and stainless steel profiles. The clamping units are moved automatically by the column, and the data is collected from the 3D CADCAM profile machining software that generates G codes from the profile drawings. All profile data can be imported from dxf and dwg files very easily through the software. The machining operations can be programmed by using the ready macros for drilling and milling. The machine has a 7.5 kW 24.000 rpm spindle with adjustable speed for different thicknesses of materials.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position ring, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a displacement signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position ring, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a displacement signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.