Rounding - Import export

Very sharp blades to ensure a clean cut. Power handle for strong cut. Premium Stainless Steel.

Round baseplates with T-slots are used for constructing modular fixtures. These baseplates are positioned and mounted directly on machine tables. The precise longitudinal and transverse slot spacing ensures very high repeat clamping accuracy. The aligning holes are used to align the baseplate on the machine table. Please order locating pins to locate the baseplates separately. Ring bolts with T-nuts for hoisting are supplied. Other dimensions available on request. On request: other dimensions. Drawing reference: 1) hole for DIN 912 cap screw (D4)

Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539

These brackets are used to hang aluminium profiles for roller rails in a round profile. A mounting set is supplied.

Doubleacting pneumatic cylinder acc. to DIN ISO 6432. Piston rod with external thread, position detection for proximity switch and flexible damping on both sides.

The round slings comply with DIN EN 14922. They are made of highstrength endless polyester fibre cords. These polyester fibre cords are protected by a sturdy and seamlessly woven polyester sleeve. This sleeve surface is also impregnated with polyurethane to make it abrasionproof. The working load limit (WLL) and the cord tonnage (tonne capacity per cord) are either woven into or printed on the protective sleeve of the sling. The safety label with the CE mark and technical data is firmly sewn onto the sling. The colour of the round sling corresponds to the colour code scheme for load capacities of textile type slings. These round slings have high UV resistance and low moisture absorption. These round slings carry the CE mark according to the European machinery directive.

Round sling hooks for quick suspension of textile lifting equipment such as hoist belts or round slings. The round sling hook is fitted with a robust, forged safety latch. All edges are rounded to protect the textile slings. The colour of the round sling hook corresponds to the colour code assigned to textile lifting equipment that signifies the permissible loads. The round sling hooks correspond to the Machinery Directive and are BG certified (H stamp). Temperature range From 40°C to 200°C = 100% permissible load Up to 300°C = 90% permissible load Up to 400°C = 75% permissible load

The machine grip impresses with a combination of solid appearance, high stability and extreme lightness. The patented fastening system enables the handles to be installed from the rear with no screws visible from the front. With its easy-to-clean and abrasion-resistant surface, the handle also blends in perfectly with its surroundings.

Steel 1.0037. Aluminium EN AW-6060. Version: Steel electro zinc-plated. Aluminium anodised. Note: The machined tolerances of these round and square tubes are individually matched to the tube clamping system. *Square aluminium size 10x10 are only available as solid bars. On request: - Custom cut length (L max. 5000 mm) - Stainless steel tube (L max. 3000 mm)

Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.

Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539

Diameter 32-63mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

Housing steel. Cage plastic. Balls steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seal. The linear ball bearings have a plastic cage which results in quiet and outstanding running properties. With flange for direct mounting on the housing. Linear ball bearings with doublesided seal should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts. Precision guide shafts 21595. Fastening screws 07160.

Grippers and inserts are ideal for use in clamping arms, gripping systems, clamping fixtures, clamping jaws and self-aligning pads. The use of grippers allows the transfer of very high torque values and above average grip, even with hard materials and surface irregularities. Form O: The abrasive diamond surface is bonded firmly to the base. It is ideally suited to supporting smooth or slippery applications with a minimum of clamping pressure. This allows the diamond particles to get a firm grip on a very small area with minimum damage to the surface. The diamond surface offers excellent wear resistance. Form P: The polyurethane surface is vulcanised firmly to the ball. It is abrasion-resistant and does not discolour. It offers optimum protection against damage to delicate surfaces. The pearl-like surface gives a firm grip and allows air to escape so as to prevent any suction effect between the contact surface and the self-aligning pads.

The Precision Tube is PAF's top-of-the-range technical product. It is manufactured to EN10305-2 standard and used in the best precision mechanical parts manufacturing plants in Tunisia and Europe. Drawing processes make it possible to obtain tubes specific to each application, by playing on steel grades, mechanical characteristics, reduced dimensional tolerances and final surface finish.

Round cord is widely used as a sealing filler cord, or to make Orings. Protective effect Shock absorbing Can be manufactured into Orings by vulcanization or glue

Discover our Round Briquettes with an 80mm diameter, crafted from the finest beech wood. These briquettes come in 10 kg packages, tailored to your preferences - from plastic wrap to cardboard. Their shape and quality enable quick attainment of high temperatures and long-lasting burning, making them an ideal choice for all types of stoves.

We supply round, square, hexagonal rectangular bar in a broad range of dimensions .

Protection caps for facade screws (hexagon head screws) with round neoprene slice. Material: PE Colour: black Ø = washer diameter A production according to RAL colour chart or colour sample is possible - please send us your enquiry!

if you have an idea you want to develop or you want a line of products no one else has, then a custom collection is what you’re looking for. Choosing a custom collection means: A unique design from concept to production. Minimum order depends on fabric chosen. Get what you want, choose fabrics and product shapes. Products that are exclusive to your brand. It works like this: We’ll meet to discuss your ideas, products, and target customers. We’ll research your target, and create drawings and models based on their needs. After you select some designs, we’ll produce prototypes. Once you get a chance to feel and test, you’ll pick your prototypes for order We’ll order the materials, start production, and get them to you or your customers as soon as possible.

We supply round, square and rectangular Pipes

Round dialysis cells The cylindrical electrode is mounted into the cylindrical membrane, which is hold by a strong pervious pipe from the inside and protected by a mesh from the outside. The anolyte is leaded through the anode pipe through the bottom of the electrode and flows constantly through the toroidal gap between electrode and housing to the anolyte outlet. By the standardized membrane support, a multitude of membranes can be used. The pipe cells of OSMO Membrane Systems GmbH are easy to handle, because even a 2m long electrode only weights 8 kg. Advantages of the OSMO round dialysis cells: Can be opened without tools by quick release fasteners Anode pipe made of seamless thick-walled stainless steel 1.4571 (standard) – treated titanium available on request Continuously anolyte inflow and outflow as well as selective anolyte distribution Anode can be turned inside the membrane

Cylindrical round bottles in PE with matching overcap with 50 ml, 100 ml, 125 ml and 150 ml so that the bottle with the cap as unit closes cylindrical. As appropriate application is suitable especially, a Sprayer.

Pharmaceutical bottles From 100 ml until 1.000 ml

With Narrow and Wide Neck from 50 ml until 2.000 ml. Opening from 18 mm to 65 mm with a lot of closures.

These bottles are frequently used for cosmetics or body care products. Customization gives each bottle its own unique charm. From 30 ml until 1.000 ml

Cylindrical round bottle series with a variety of thread types for hinged flap, spray and screw on closures.

Made of PE with tamper evident.

With label panel, as a shaking bottle or in a cylindrical design - it’s up to you what you want to use our bottles for. We have the right design for any purpose. From 3 ml until 1.100 ml