Software - Import export

Windows software for configuring digital manometers and displaying the current measured values. The configuration options include the ability to set factors for additional units of measure, calibrate the amplification and offset factor, or change the automatic switch-off time.

This software package for the GSM-1 remote transmission module (no longer available) contains the GSM-1 setup and modem logger software, as well as the operating instructions.

Software for Windows 3.xx, 95, 98, NT, 2000 and XP for configuring the DC22, Mano Record (MR2), Series 53 and Series 55 devices (no longer available) and reading off the recorded data.

Software for DOS, Windows 3.xx, 95, 98, NT and 2000 for configuring the Mano Record (MR01), calibrator and Mano Cali devices (no longer available) and reading off the recorded data.

USB driver for manometers and remote transmission units with a USB connection.

USB driver for the K-114 interface converter and for the DCX-18-ECO level logger. This driver is also included in KOLIBRI Desktop and Logger 5.

Windows software for editing the I2C slave address of D-Line pressure transmitters and for displaying the scaling and additional product information.

Windows software for configuring the tank content calculation for CA1 «Castello» display units.

Windows software for configuring pressure switches (switching points, normally closed/normally open, hysteresis and window function).

Windows software for displaying measurement data from the remote data transmission units GSM-2 and ARC-1 and for saving this data in a database.

Windows software for configuring KELLER IoT remote data transmission units such as GSM-2, ARC1 and ADT1.

Calibration software for the conductivity sensor of 36XiW-CTD level probes.

Windows software for reading off and configuring data loggers. The measurement data can be displayed in graph form or exported. Air pressure compensation can also be carried out on the data, or it can be converted into water level values. The online function shows the current value of the device.

Windows software for configuration and diagnostics of the K-114 interface converter (termination, network bias, echo, baud rate, current consumption, supply voltage and input voltage).

The Windows software ControlCenterSeries30 (CCS30) communicates with KELLER devices that are connected to the PC via an interface converter. The computer program displays current pressure values and curves, records measurements and exports them as a CSV file. The configuration details (e.g. zero point settings, output signal or comparison data) can also be displayed and edited. Up to 128 KELLER devices can be connected together to form a bus system and displayed simultaneously.

Android app for communicating with KELLER devices via Bluetooth. Use the KOLIBRI Mobile app to access current measured values and logger recordings, save the measurements to your mobile phone and share data with other users. All products in the KOLIBRI suite are intercompatible and can exchange data with one another. The functions are continually being further expanded and optimised.

Web app for collecting and displaying measured values that are recorded by KELLER IoT devices and transmitted via mobile radio or LoRaWAN. KOLIBRI Cloud offers a wide variety of options for device configuration and displays current measured values and logger recordings in graph form. Thanks to the search and filter options, saved measurement data can be organised with ease and can also be exported as an image, as an Excel or Word report, or in additional formats. You can also use your existing software solutions to access data in KOLIBRI Cloud via JSON API. All products in the KOLIBRI suite are intercompatible and can exchange data with one another. The functions are continually being further expanded and optimised.

Centralise Vendor payments. Import supplier master data from the ERP, subsidiaries upload all their supplier invoices. Payment aggregation simplifies group financing, improves liquidity forecasting, reduces FX costs and improves Vendor communication and their billing process.

Many of the world’s largest corporates use the Coprocess netting solution and have been for many years. Not only do they choose Coprocess, but they stay with Coprocess. The system is able to interface with all the major ERP systems commonly found, including but not limited to SAP, Oracle, Peoplesoft etc. The system can handle volume be that number of users, number of invoices or number of entities. Our largest customer settles over 100,000 invoice per month and has more than 1000 user logins per day. Our scalable infrastructure allows the system to be scaled up to fit any increasing load. Our global support team offers a multilingual support service covering a 20 hour window.

SMARTCOLLECT is a data management software for easy and safe measured data acquisition as well as data analysis focussing on energy management. SMARTCOLLECT acquires, stores, visualises, evaluated as well as automatically reports all relevant consumption data of power, water, gas or heat. A modern graphic user interface permits intuitive and easy operation even in numerous measuring points. Functions and measuring points may be very easily supplemented at any time due to the modular design.

eSight is a comprehensive and intuitive software package offering professional methods for the management of energy-related data. eSight is fully web based making it available online. The software can also be installed to a client. Data can be automatically imported from data loggers, BMS and SCADA systems, production systems, electronic billing and spreadsheets. Interfaces for system integration with the most important system manufacturers making integration of existing systems very easy.

The web-based W@M Portal allows data monitoring of your process, permitting proactive maintenance of your devices. You get fast access to critical information, such as spare parts, product availability and reports. Quick access to the right information speeds up your processes, such as repair or replacement on an instrument or downloading certificates for inspections. Furthermore, the pre-filled data available allows reliable planning of your maintenance events.

W@M Enterprise is Endress+Hauser's software for asset information management. Connected with W@M Portal, it allows for real-time data monitoring of your process, permitting proactive maintenance of your devices. You get fast access to critical information, such as spare parts, product availability and reports. Quick access to the right information speeds up your processes, such as repair or replacement on an instrument or downloading certificates for inspections.

FieldCare is Endress+Hauser's universal tool for configuring field devices that provides a range of functionality from device parameterization to engineered Condition Monitoring solutions.

Memobase Plus is the perfect software to improve your process safety and reliability. It documents the complete lifetime of Memosens sensors offering full traceability with a minimum of paperwork. Memobase Plus turns your computer into a high-performance, space-saving measuring device for up to 4 parallel sensors. You can save and export measurement data and use identical sensors in the laboratory as in the process to achieve truly comparable measurements.

Coprocess SA - The Month-End Reconciliation module allows the company's business units to upload ALL receivables and ALL payables so that these can be reconciled with the counterparty across the whole group, tighter control means better numbers for the consolidated P&L and Balance Sheet

You need software for your embedded device, IoT device or a device driver? Windows, Linux or cloud services? Our focus is on the development of embedded and real-time applications and the associated GUI or backend software in the cloud. Our references in software development and electronics development speak for themselves. We have the ability to manufacture small and medium product quantities.