Temperature sensors - Import export

Micro heaters are used in devices requiring a small but accurate heat source with precise temperature control, such as optical interactive assistance systems. Allowing for targeted heating of tiny spaces, IST AG micro heaters are found across various industries, including automotive, laser manufacturing, humidification units, life-science, 3D printing and medical devices. They are a precision heat source for gas and humidity sensors, biospy or tissue samples for medical analysis, or used in malignant tumor treatment. Our micro heaters combine high-precision and long-term stability with a wide temperature range from -50°C up to +800°C and feature numerous benefits: — Fast response times — High temperature stability — Long term stability — Overheating protection — High precision — Targeted heating of tiny spaces — Tailor-made to fit customer's application Each micro heater is individually customized and designed to fit your application's requirement.

Micro heaters are used in devices requiring a small but accurate heat source with precise temperature control, such as optical interactive assistance systems. Allowing for targeted heating of tiny spaces, IST AG micro heaters are found across various industries, including automotive, laser manufacturing, humidification units, life-science, 3D printing and medical devices. They are a precision heat source for gas and humidity sensors, biospy or tissue samples for medical analysis, or used in malignant tumor treatment. Our micro heaters combine high-precision and long-term stability with a wide temperature range from -50°C up to +800°C and feature numerous benefits: — Fast response times — High temperature stability — Long term stability — Overheating protection — High precision — Targeted heating of tiny spaces — Tailor-made to fit customer's application Each micro heater is individually customized and designed to fit your application's requirement.

Temperature is one of the most measured physical parameters. Despite this, precise temperature measurement is one of the most difficult tasks in motor technology. To meet the constantly increasing requirements for improved motor performance, higher efficiency and reduced emissions, it is necessary to use reliable and precise sensors in modern motor control systems. The increased requirements over the last few years regarding measurement accuracy and reliability of temperature measurements has meant that many equipment operators must reconsider the suitability and performance capacity of their temperature measurement equipment. Resistant thermometers can be used between -200 °C and +850 °C. An important common property is that their output parameters are available in the form of electric signals that can be relatively easily transferred to measurement and control instruments for processing, storage and display.

Very high magnetic retention Spring-mounted copper plate 2m long silicone cable Mini flat plug

THA 200 THA 400 THA 1000 THA 1250 Compatible with any thermocouple probe type K, J or T (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

THK 200 THK 400 THK 1250 Compatible with any thermocouple probe type K, J, T or R/S (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

THN 200 THN 400 THN 1250 Compatible with any thermocouple probe type K fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

USB temperature converter - including free readout software - efficient and flexible measurement without additional measuring system - mobile and directly on site - for all common thermocouples.USB stick with software for direct reading and further processing on the PC Plug connection - flexibly connect the USB stick to the temperature sensor Processing of the measured values, transfer to the software Different temperature sensors and thermocouples possible Various cable types , lengths and types of connections can be selected

Suitable magnetic materials Spring-mounted copper plate Teflon-coated twisted cable Mini flat plug

Measurement in seconds Measuring range -65 to +400 degrees Twisted measuring tip

Very high magnetic retention Spring-mounted copper plate 2m long silicone cable Mini flat plug

Suitable magnetic materials Spring-mounted copper plate Teflon-coated twisted cable Mini flat plug

Measurement in seconds Measuring range -65 to +400 degrees Twisted measuring tip

White light interferometers use infrared light in the non-visible range (approx. 840 nm wavelength), which means that the measurement position cannot be seen. To visualize the measuring position, Micro-Epsilon systems are equipped with a pilot laser which projects a light spot onto the measuring position. In addition, the pilot laser uses a patented method to provide feedback on the distance in addition to the measurement position. If the measuring object is at the correct distance and within the measuring range, a constant glow is emitted by the pilot laser. If the measuring object is outside the measuring range, the pilot laser flashes.

The capaNCDT DT61x4 is an active, capacitive system for displacement, distance and position measurements. Consisting of a sensor with integrated preamplifier, a robust cable and a compact controller, the measuring system is immediately ready for use without any on-site calibration. The measuring system is available with a cable length up to 15 m and is ideal for automation purposes. The capaNCDT 61x4 is particularly suitable for automated robot manufacturing and measurement tasks with a drag chain. Moreover, it is used in machine building and semiconductor production. For optimum signal quality, the desired cable length is already factory-calibrated.

This temperature sensor is for measuring the temperature of liquid and gaseous media in engines, sets of machines and utility vehicles. A Pt 1000 thin-film precision resistor is used as the measuring element. The temperature-dependent resistance of the Pt 1000 is evaluated by an electronic circuit and outputted as a temperature-dependent voltage at the sensor‘s output. The interrelationship between temperature and voltage corresponds to the characteristic curve for the Pt 1000 and is thus nearly linear. The assignment between temperature and output voltage is nearly freely selectable, the lesser temperature corresponding to the lesser output voltage. The sensor‘s lowest possible output voltage is 0.1 V and its greatest is 10 V. The output is overload-proof and short-circuit-proof. The sensor has no mechanical moving parts and so is not susceptible to vibration and soiling.

BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors react when a filling level is exceeded or falls below a limit. Aqueous mediums like coolants, AdBlue®, fresh water, waste water, bilge water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored. Since they contain no mechanical moving parts, their function will not be influenced by dirt particles or other influences. No electrical current is sent through the medium via an electrode with BEDIA sensors, an electrolysis of the medium is not possible. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that arises when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator, causing it to oscillate. Then this signal is processed by a microprocessor-based evaluation circuit.

BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors detect when a filling level is exceeded or falls below a limit. Water-based liquids like coolants, AdBlue®, fresh water, waste water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that occurs when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator. This signal is processed by a microcontroller-based evaluation circuit which activates or deactivates an output stage. Types of Media The level monitoring sensors are designed for two different media types: For electrically conductive liquid media with relative permittivity within a range of εr 35 … 85 (water, coolant, water/glycol mixture) For electrically non-conductive liquid media

The thermocouple probe is characterized by a fast response time and is perfectly suited for high or very high temperature operation. The temperature sensor is often delivered with a connection head (see photo opposite).

The Structural Health Sensors combine a 2-axis accelerometer with a temperature sensor. Their enhanced internal surge protection and electromagnetic interference immunity make them particularly suitable for the permanent monitoring of outdoor tall structures. The Structural Health Sensors can perform measurements in extreme conditions ranging from -40°C to +85°C. They are of course dust and watertight to IP66. We have a proven track record of several thousands of such sensors operating reliably around the world.TYPICAL USE Permanent outdoor monitoring of tall structures FEATURES Acceleration measurements along 2 axes Temperature measurement of the surface the sensor is attached to Signals transmission through 4-20mA current loops Embedded Lightning Protection Operation down to -40°C MODELS Standard High Resolution

We have newly developed an Thermistor sensor for Automotive. This is suitable for measurement of EV and HEV motors and batteries temp. It has begun to be widely adopted by Japanese automobile manufacturers. It can also be used for various other purposes. Please contact the following for details. E-mail sensor@tateyama.or.jp

We have newly developed temperature sensor for vaccine storage. This sensor can measure up to -80℃. Suitable for temperature control such as low temperature transportation of vaccines. Compliant with JISC 1604-1997 High temperature accuracy / Class B (±0.3℃ at 0℃） Please contact the following for details. E-mail sensor@tateyama.or.jp

The measuring probe lance is in the form of a length of 2000 mm and includes the three temperature sensors: - on the tip of the lance - at a distance of 750 mm from the tip and - at a distance of 500 mm from the end of the lance The lance tip has a rounded head, so when pushing into the pile it does not poke through encountered "in the way" compost components. The probe in wireless version is powered by a battery. Measurements and data are transmitted, depending on the version of the device, by wire or wireless.

mechanical temperature sensors

Brass screw-in sensor, Pt100/Pt1000. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly with protection tube. Exchangeable gauge slide. Available in various immersion depths. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with 1x Pt100, 2x Pt100, 1x Pt1000 or 2x Pt1000 measuring elements. Approvals: DNV-GL, LR

Predictive maintenance needs measured data to the greatest possible precision. On components with moving or rotating parts, the relevant measuring points (e. g. temperature of an electric motor’s rotor or planetary gearbox bearing) sometimes cannot be accessed with wired sensors. Accordingly, the data needed for condition monitoring can be obtained only with complex calculations and estimates. However, precise and reliable measured data are obtained only when a sensor is placed directly on the moving part. For requirements of this kind we have developed NORIFID, a simple, cost effective measuring system that is based on established technologies, supplies wirelessly power by induction to a sensor on a moving part, and transmits the measured data via RFID to a fixed receiver.

Stainless-steel flange sensor, Pt100/Pt1000 Compact, robust and enclosed design. Ideal for transport technology, thanks to their construction and type test as per DIN EN 50155. Simple assembly via flange design. Available in various immersion depths. Simple customised cable assembly, optionally with increased insulation voltage > 2 kV AC. Available as 2-wire, 3-wire or 4-wire type. Maintenance-free. Reduced-weight design; also available with 90° cable outlet (see TA14) or straight cable outlet (see TA18).

Your benefits Mass flow measurement Integrated temperature sensor Simple burner setting with flow rate display Simple consumption monitoring with limiting value switch Qmin/Qmax Manual dosing feature, with a resettable counter be mounted on the pressure or suction side of a pump Space-saving installation, because no straight inlet/outlet sections are required Flexible mounting of the meter in horizontal, vertical or inclined positions Accurate measurement result, since the reading is independent of the temperature and viscosity of the fluid Minimum failure costs due to simple function monitoring, rapid fault analysis and the possibility of simple repairs on site Areas of application To measure heating fuel consumption by oil burners (for example, in heating boilers, industrial furnaces, tar processing plants) Consumption monitoring and optimisation (ships, generators and large vehicles, etc.) Flow measurement for mineral oils Optional remote processing and integration into...