The main frames - Import export

You can work many formats with or without contact with high quality and suitable for lamination of contact and contactless plastic cards BENEFITS Heating and cooling presses are independent, so the costly heating up and cooling down of the hot platens during each production cycle is totally avoided. The main frame of the heating and cooling presses are constructed of rigid welded steel. The main hydraulic cylinders are hardened, ground and hard chromium plated. The platens are guided by frictionless material. Heating and cooling presses are operated by a separate hydraulic system. A low pressure pump is used to lift the platen at a quick speed, while a high pressure pump is used to keep the heating and cooling presses at a high pressure. The pressure settings at the different stages of heating and cooling are programmable. The closed loop transport system significantly reduces material cassette loading and transfer time, resulting in much reduced consumption of energy.

It ensures the classification of the ground product in a clean and orderly manner, thanks to the freely swinging body and the crates of different sizes in each passage within the body. After being sieved and homogeneously separated, the product in various proportions is automatically directed to the outlet channel through the channels in the frame, the channels between the frame and the channels in the main chassis, and is discharged outside the outlet pipes through control pipes. The surfaces of the cases are covered with formica. The outer covers of the passage are insulated, thus preventing flour particles from leaking out. The product enters the first case as one or two batches from the entrance above the passage and flows along the passage height of all cases. By placing spacers between the frames of the main frames, the product output volume increases, accumulation

Core technology: Maintenance-free, mildew-proof,moisture-proof and anti-corrosion; mirror and tempered glass can be used for appearance, and integrated with natural scenery. Main Frame:   main frame assembly type, can be transported to the site in batches to complete assembly, efficient and fast; Wall System:   high-end matte fluorocarbon gray aluminium plate is used for exterior wall and roof, Connections:  seamless connection between wall and roof greatly improves the aesthetic feeling of the building, Interior decoration:  interior assembly of Elegant Angel white carving board and jute interior decoration, sound insulation and environmental protection; Flooring:  Residential system, floor with anti-skid wood grain fast-loading floor, Outdoor Area:  Outdoor terrace High-end plastic boards, The overall design of "art comes from nature" as the concept, making it a unique landscape in nature! Standard Size : 7200 * 3600 * 3850mm, 3000 * 2000mm (Attic area) Total : 32.㎡

HIgh Speed Automatic Rotary Piston Filling Machine is designed for meeting the high capacity packaging demand, Once production requirements exceed the capability of inline piston fillers. it works on same volumetric principle with the inline piston filler,with rotary head, syringe, piston & nozzle. Features: The main frames and construction is made of 304SS Robust, Sanitary design construction with automatic CIP cleaning function Mechanical cam and nozzles design, which ensure the working more stable. Controls platform: Siemens Gears and motors: SEW Germany Pneumatics: Festo Germany or SMC Sensors: Banners “No bottle – no fill” device with anti-breakage safety Pistons entirely in stainless steel, Cylinders in high thickness stainless steel No tool removal of pistons and valve plugs No dead corner, food grade.

HIgh Speed Automatic Rotary Piston Filling Machine is designed for meeting the high capacity packaging demand, Once production requirements exceed the capability of inline piston fillers. it works on same volumetric principle with the inline piston filler,with rotary head, syringe, piston & nozzle. Features: The main frames and construction is made of 304SS Robust, Sanitary design construction with automatic CIP cleaning function Mechanical cam and nozzles design, which ensure the working more stable. Controls platform: Siemens Gears and motors: SEW Germany Pneumatics: Festo Germany or SMC Sensors: Banners “No bottle – no fill” device with anti-breakage safety Pistons entirely in stainless steel, Cylinders in high thickness stainless steel No tool removal of pistons and valve plugs No dead corner, food grade.

Gross Weight: 0.16kg Material: Fine cotton pull frame Main Fabric Composition: cotton Material Ingredients: 90 (%) Thickness: ordinary

Gross Weight: 0.1kg Material: High quality cotton pull frame Main Fabric Composition: Polyester Fiber (Polyester) Material Ingredients: 81%-90% Main Fabric Composition 2: Polyester Fiber (Polyester) Material 2 Ingredients: 81%-90% Type: Rompers Pants Type: tight Length: hot pants Waistline: Middle waist Thickness: ordinary Style: street hipster

Gross Weight: 0.12kg Material: Pull frame thread Main Component Content Of Fabric: 91% (inclusive)-100% (exclusive) Pattern: solid color Sleep Length: sleeveless Version: Slim fit Length: 70-75cm Thickness: ordinary

Gross Weight: 0.15kg Material: Imitation cotton pull frame Main Fabric Composition: Polyester Fiber (Polyester) Material Ingredients: 71%-80% Main Fabric Composition 2: Polyester Fiber (Polyester) Material 2 Ingredients: 71%-80% Style: Mature Type: Basic Pants Type: tight Length: hot pants Waistline: high waist Thickness: ordinary Fabric 2 Ingredients: Polyester Fiber (Polyester) The Content Of The 2 Components Of The Fabric: 71%-80% Fabric 3 Ingredients: Polyester Fiber (Polyester)

Floor heating styrofoam is a must-have component in a floor heating installation. Thanks to its features, it not only provides thermal insulation under the floor of the house or building where heating is desired, but also serves as a main frame that ensures the proper and proper installation of underfloor heating pipes. Since Styrofoam will be laid under the floor and covered, choosing high-quality products is the most important factor for years of trouble-free use. Aldea underfloor heating styrofoam is made of high quality material and will perform its heating function without any problems for many years when applied according to the rules. Styrofoam is produced in different densities to meet different needs, depending on factors such as the insulation status of the area to be used, ground structure, and external temperature measurements.

DIVIDER & ROUNDER Up to 11000 pcs/hour capacity Weight range 40-140 grams (±2 gr) 6 pieces 50mm diameter pistons Changable outer drum for different weights 6 row outlet belts Automatic oil lubrication Variable speed controls for main drive and rounding unit Flour duster Dough bunker capacity is 210 kg Total power 5 kW 7 inc HMI Touch Panel PLC control INTERMEDIATE PROOFER Proofing time 10 minutes (for10.000pcs/hour) 6 pocket stainless steel dough carrier tray 278 pieces active tray 1668 active pockets Removable and washable UHMWPE mesh pockets 2″roller chain for tray transport Main frame is stainless steel tube. Total power 1.5 kW.

DIVIDER & ROUNDER Upto 11000 pcs/hour capacity Weigh trange 40-140 grams (±2 gr) 6 pieces 50mm diameter pistons Changable outer drum for different weights 6 row outlet belts Automatic oil lubrication Variable speed controls for main drive and rounding unit Flour duster Dough bunker capacity is 210 kg Total power 5 kW 7 inc HMI TouchPanel , PLC control INTERMEDIATE PROOFER Proofing time 10 minutes (for 6000pcs/hour) 6 pockets stainless steel dough carrier tray 139 pieces active tray 834 active pockets Removable and washable UHMWPE mesh pockets 2″ roller chainfortray transport Main frame is stainless steel tube. Total power 1.5 kW Easy Access for maintenance Safety switches on doors.

DIVIDER & ROUNDER Upto 7000 pcs/hour capacity Weight range 40-140 grams (±2 gr) 4 pieces 50mm diameter pistons Changable outer drum for different weights 4 rows outlet belts. Automatic oil lubrication Variable speed controlsfor main drive and rounding unit Flour duster Dough bunker capacity is 140 kg Safety switches on doors Total power 5 kW 7 inc HMI Touch Panel PLC control INTERMEDIATE PROOFER Proofing time 10 minutes (for 4000pcs/hour) 4 pockets stainless steel dough carrier tray 146 pieces active tray 584 active pockets Removable and washable UHMWPE mesh pockets 2″ roller chain for tray transport Main frame is stainless steel tube Total power 1.1 kW Easy Access for maintenance Safety switches on doors

Square Trampoline Quad 180x180 is designed for the outdoor use and can be easily set into the ground. Our designers made sure the product meets the highest European standards. Trampoline was designed in accordance with EN 1176-1 standard: “Playground equipment and surfacing – Part 1: General safety requirements and test methods”, which guarantees the correct safety level when playing on the trampoline or around it. Trampoline is intended for children at the age of 4 and older and for adults whose weight does not exceed 150kg. Trampoline guarantees great and safe outdoor fun for both, children and adults. A wide range of colours available – we can meet all expectations. Built from the best materials and safe to the environment. Trampoline is to be set into the pre-prepared pit and consists of three main parts: frame, jumping-bed and shock-absorbing mat.

Square Trampoline Quad 100 is designed for the outdoor use and can be easily set into the ground. Our designers made sure the product meets the highest European standards. Trampoline was designed in accordance with EN 1176-1 standard: “Playground equipment and surfacing – Part 1: General safety requirements and test methods”, which guarantees the correct safety level when playing on the trampoline or around it. Trampoline is intended for children at the age of 4 and older and for adults whose weight does not exceed 150kg. Trampoline guarantees great and safe outdoor fun for both, children and adults. A wide range of colours available – we can meet all expectations. Built from the best materials and safe to the environment. Trampoline is to be set into the pre-prepared pit and consists of three main parts: frame, jumping-bed and shock-absorbing mat. Technical specifications: full size: 211x211 cm jumping bed: 153x153 cm

Square Trampoline Quad 100 is designed for the outdoor use and can be easily set into the ground. Our designers made sure the product meets the highest European standards. Trampoline was designed in accordance with EN 1176-1 standard: “Playground equipment and surfacing – Part 1: General safety requirements and test methods”, which guarantees the correct safety level when playing on the trampoline or around it. Trampoline is intended for children at the age of 4 and older and for adults whose weight does not exceed 150kg. Trampoline guarantees great and safe outdoor fun for both, children and adults. A wide range of colours available – we can meet all expectations. Built from the best materials and safe to the environment. Trampoline is to be set into the pre-prepared pit and consists of three main parts: frame, jumping-bed and shock-absorbing mat. Technical specifications: full size: 158x158 cm jumping bed: 100x100 cm

Square Trampoline Quad 120x120 is designed for the outdoor use and can be easily set into the ground. Our designers made sure the product meets the highest European standards. Trampoline was designed in accordance with EN 1176-1 standard: “Playground equipment and surfacing – Part 1: General safety requirements and test methods”, which guarantees the correct safety level when playing on the trampoline or around it. Trampoline is intended for children at the age of 4 and older and for adults whose weight does not exceed 150kg. Trampoline guarantees great and safe outdoor fun for both, children and adults. A wide range of colours available – we can meet all expectations. Built from the best materials and safe to the environment. Trampoline is to be set into the pre-prepared pit and consists of three main parts: frame, jumping-bed and shock-absorbing mat.

Metal frame anchor The main purpose is to attach wooden, metal frames and wooden boxes to a concrete base, building stone, solid and hollow bricks. End-to-end installation. The anchor consists of a steel split sleeve, a screw with a PZ3 slot and a cone nut. The design of the anchor is made in such a way that it is wedged and fixed first in the base, then in the attached material.

1. Provides circumferential welding (lathe welding) for tube, pipe, vessel…etc. in an easy operation but good welding quality solution. 2. This optimizes any process which reduces welding costs and improves the quality of the weld. 3. Suitable for TIG (GTAW), MIG (GMAW), Plasma (PAW) and Sub Arc welding (SAW) process. The style main frame design that allows 7 angular position adjustment from vertical to horizontal position (0° ~ 90°). Index welding is also available in this series.

The environmental protection has become essential. The water quality is a rare and expensive commodity and its production involves a problem more and more present with the industrial or urban slurries which need to be eliminated at a lower cost and if possible to be recovered. The filter-press has an important place in numerous industries whenever slurries can be concentrated : it can be used either in process or at the end of treatment. In any case the filter-press enables an optimal separation of liquid and solid and the last technical developments which has made it 100 % automatic made it also 100 % topical. The filter-presse is a machine used to filter under pressure the liquids loaded with solid matter in suspension. The filter-press is composed of 3 main parts : the frame, the filter part and the hydraulic power unit..

The environmental protection has become essential. The water quality is a rare and expensive commodity and its production involves a problem more and more present with the industrial or urban slurries which need to be eliminated at a lower cost and if possible to be recovered. The filter-press has an important place in numerous industries whenever slurries can be concentrated : it can be used either in process or at the end of treatment. In any case the filter-press enables an optimal separation of liquid and solid and the last technical developments which has made it 100 % automatic made it also 100 % topical. The filter-presse is a machine used to filter under pressure the liquids loaded with solid matter in suspension. The filter-press is composed of 3 main parts : the frame, the filter part and the hydraulic power unit..

The FRP 05 equipment has been designed to produce optical fiber ribbons up to 12 (max. 24) fibers. The operating is simple and the equipment is multi-various (various pay-off and take-up reels, fiber tension measuring, software-update, options, accessories etc.). High speed ribbon processing Production of multi-fiber elements (CFU) Operational speeds up to 1000 m / min Processing of up to 12 (max. 24) fibers Modular designThe system basically comprises five main components whose frames have been designed for later installation of various options. This allows the machine to be upgraded at moderate cost as the need arises, e.g. for ring marking, higher UV curing performance, etc. FEATURES Ribbon production speed up to 1000 m/min including high precision ribbon printing Inline coloring in one single step with ribbon/CFU production Compact fiber bundles with UV-coating multi-layer structure Flexible ribbon with 200 µm fiber

MODULAR CONSTRUCTION The system comprises five main components whose frames have been designed for later installation of various options. This allows the machine to be upgraded at moderate cost as the need arises, e.g., for ring marking, higher UV curing performance, etc. MAIN COMPONENTS TPO1-K Autotraversing Pay-off Unit CCD1-K Coloring and UV curing Station Ink supply system, high-speed coating head, and high performance M550 UV irradiator unit mounted on a common frame. UVM1-K Second coloring and UV curing Station for speeds up to 3000 m /min TUD1-K Take-up High-speed capstan and take-up system with separate control cabinet. PCI1-K Control Unit FEATURES Fiber tension sensors ensure optimized fiber tension control. Automatic reel size detection makes it extremely easy for the operator to adjust the traversing system New M550 UV irradiator with control system that constantly measures the irradiator power and automatically adjusts the power

AXLE GROUP: 12 – tonner 3 pcs R:17,5” European Brand (SAF HOLLAND) or Turkish brand /Air Suspension/Tire options, suitable for 17,5” or 22.5” rims/24 V Electrical system (conforming to European Standards)/EBS brake system (4S/2M or 4S/3M)in conformity with 71 /320 / EWG or ECR 13 Regulations/Dimensioned ramps in accordance with customers’ preference/ 2” 42 CRMO4 Steel King-Pin (conforming to DIN 74080) or 3,5” 42 CRMO4 Steel King-Pin (in accordance with DIN 74083) are used/ 24 Tonner 750 mm or 850mm mechanical landing legs/G.W: 52.000 Kgs-N.W: 9.500 Kgs-Mass W: 42.500 Kgs Measurements of vehicle can be designed within min. max. values, in accordance with customers’ requirements.Painting or galvanizing options are available according to the customers’ requests. Main chassis and entire vehicle will be painted in paint oven as Washing + Sandblasting + two coat epoxy primer + two coat acrylic paint 2 x Plastic Wheel Chock 1 x Fire Extinguisher Box 1 x Water Tank 42x42mm Reflectors

AXLE GROUP: 11 – tonner 3 pcs R:17,5” European Brand (SAF HOLLAND) or Turkish brand. Air Suspension. Tire options, suitable for 17,5” rims. 24 V Electrical system (conforming to European Standards). EBS brake system (2S/2M) in conformity with 71 /320 / EWG or ECR 13 Regulations. Hydraulic or manual operated ramps with appropriate dimensions according to the customers’ preference. Tandem made from ST52 reinforced steel, mounted to chassis and front wall, with 50mm eye and can be adjusted in mechanical system. 650 mm mechanical landing legs. G.W: 23.000 Kgs N.W: 5.000 Kgs Mass W:18.000 Kgs Painting or galvanizing options are available according to the customers’ requests. Main chassis and entire vehicle will be painted in paint oven as Washing + Sandblasting + two coat epoxy primer + two coat acrylic paint 2 x Plastic Wheel Chock Plastic Fenders Reflectors and Anti-spray mud laps conforming to European Standards 42x42mm Reflectors 2 x Lockable Plastic Tool Box

AXLE GROUP: 12-tonner 4 pcs R:17,5” European Brand (SAF HOLLAND) or Turkish brand / Air Suspension /Tire options, suitable for 17,5” or 22.5” rims /24 V Electrical system (conforming to European Standards)/ EBS brake system (4S/2M or 4S/3M) in conformity with 71 /320 / EWG or ECR 13 Regulations/ Hydraulic ramps with appropriate dimensions according to the customers’ preference/ 2” 42 CRMO4 Steel King-Pin (in accordance with DIN 74080) or 3,5” 42 CRMO4 Steel King-Pin (conforming to DIN 74083) are used/ 24 Tonner 750 mm or 850mm mechanical landing legs/ G.W: 62.000 Kgs - N.W: 11.000 Kgs Mass W: 51.000 Kgs Measurements of vehicle can be designed within min. max. values, in accordance with customers’ requirements.Color options are available according to customers’ requests.Main chassis and entire vehicle will be painted in paint oven as Washing + Sandblasting + two coat epoxy primer + two coat acrylic paint 1 x Plastic Wheel Chock 1 x Fire Extinguisher Box 1 x Water Tank 42*42mm Reflectors

AXLE GROUP: 12 – tonner 4 pcs R:17,5” European Brand (SAF HOLLAND) or Turkish brand / Air Suspension / Tire options, suitable for 17,5” or 22” rims / 24 V Electrical system (conforming to European Standards) / EBS brake system (4S/2M or 4S/3M) in conformity with 71 /320 / EWG or ECR 13 Regulations / Hydraulic or manual operated ramps with appropriate dimensions according to the customers’ preference / 2” 42 CRMO4 Steel King-Pin (in accordance with DIN 74080) or 3,5” 42 CRMO4 Steel King-Pin (in accordance with DIN 74083) are used / 24 Tonner 750 mm or 850mm mechanical landing legs / G.W: 62.000 Kgs N.W: 11.000 Kgs Mass W: 51.000 Kgs Painting or galvanizing options are available according to the customers’ requests. Main chassis and entire vehicle will be painted in paint oven as Washing + Sandblasting + two coat epoxy primer + two coat acrylic paint 1x Plastic Wheel Chock 1x Fire Extinguisher Box 1x Water Tank Reflectors and Anti-spray mud laps conforming to European Standards

AXLE GROUP: 11 – tonner 4 pcs R:17,5” European Brand (SAF HOLLAND) or Turkish brand. Air Suspension. Tire options, suitable for 17,5” rims. 24 V Electrical system (conforming to European Standards). EBS brake system (4S/2M or 4S/3M) in conformity with 71 /320 / EWG or ECR 13 Regulations. Hydraulic or manual operated ramps with appropriate dimensions according to the customers’ preference. SCORPION brand coupling device with added 50mm D 190 KN eye in accordance with European Standards. G.W: 44.100 Kgs N.W: 9.000 Kgs Mass W: 35.100 Kgs Painting or galvanizing options are available according to the customers’ requests. Main chassis and entire vehicle will be painted in paint oven as Washing + Sandblasting + two coat epoxy primer + two coat acrylic paint 2 x Plastic Wheel Chock Plastic Fenders Reflectors and Anti-spray mud laps conforming to European Standards 42x42mm Reflectors

AXLE GROUP: 12 – tonner 5 pcs R:22,5” and 10 – tonner 5 pcs R:17,5” European Brand (SAF HOLLAND) or Turkish brand/ Air Suspension/ Tire options, suitable for 17,5” or 22.5” rims/24 V Electrical system (conforming to European Standards)/EBS brake system (4S/3M) in conformity with 71 /320 / EWG or ECR 13 Regulations/ Hydraulic ramps in sizes according to the customers’ requests/ 2” 42 CRMO4 Steel King-Pin (conformin to DIN 74080) or 3,5” 42 CRMO4 Steel King-Pin (in accordance with DIN 74083) are used/ 24 Tonner 750 mm or 850mm mechanical landing legs/ G.W: 72.000 Kgs - N.W: 12.000 Kgs - Mass W: 60.000 Kgs Measurements of vehicle can be designed within min. max. values, in accordance with customers’ requirements. Color will be decided according to the customers’ requests. Main chassis and entire vehicle will be painted in paint oven as Washing + Sandblasting + two coat epoxy primer + two coat acrylic paint 2 x Plastic Wheel Chock 1 x Fire Extinguisher Box 1 x Water Tank Reflectors