Electrical supplies - Import export

Our continuous type ovens can be produced as belt tunnel type, internal return (U) type or with span conveyor. Our ovens have the indirect heating thermo-block system with convection heat transfer. It can be manufactured according to power supply sources like electricity, gas or liquid fuel. The inner surfaces of our ovens’ panels are produced with galvanized sheet and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thickness (usually 160 mm) is determined and only rock wool is used for insulation. Air curtains in the furnace are placed inlet and outlet of the oven to minimize heat loss while increasing the efficiency.

Our box type ovens have the indirect heating thermo-block system with convection heat transfer. It can be manufactured according to power supply sources like electricity, gas or liquid fuel. The inner surfaces of our ovens’ panels are produced with galvanized sheet and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thickness (usually 160mm) is determined and only rock wool is used for insulation. For paint applications up to 220 °C, for special purposes up to 400 °C ovens can be produced by our company. The doors of our box type furnaces can be produced as double-sided, top opening or as guillotine door according to needs.

Electroluminescent means “Cold Radiation” working with electrical high frequency. There is no resistance or filament directly in this technology. Electroluminescent only lights up with “High Frequency”. For this reason, Electroluminescence is called Cold Radiation. Although Electroluminescent takes the name cold radiation, Electroluminescence emits very little heat (25 degrees) outside. Electroluminescence never burns the hand that can be touched. Electroluminescent need Inverter, which is a kind of transformer, to make the light. With “high frequency” electrical energy supplied by INVERTER, it strikes the barrier between the pressures and gets stuck, FOSFOR, which cannot find a place to escape, thus emerges as LIGHT.

We look to offer solutions that are more creative, more engaging, more cost-effective, economical, built to last and more environmentally conscious. From design, quality-controlled factory floor to your door, Prefabex has the capability to meet your time and budget constraints and accurately deliver on project specifications for your Prefabricated WC and shower building needs. Prefabex modular buildings Make powerful Impression wherever they are deployed. The prefabricated toilet and shower building solution is ideal for the Sports complexes, entertainment event, Mining industry facilities, education facilities, hospitals, healthcare, holiday parks, festival and construction industries. Our Prefabricated toilet and shower range from Prefabex are available with flexible options and each building type is customized to suit specific end use, with features such as electrical connection, water supply, secure locking and appropriate fit out.

E-Line KAM Series Lighting Busbar Systems has been designed to supply electricity to lighting fixtures,as well as to supply power to industrial or decorative types of fixtures."E-Line KAP Series Busbar Systems" offer an easy, simple, fast and safe solution for electrical energy distribution and lighting circuits in areas where limited power devices are used in factories and workshops.

On-Line Double Conversion Technology Galvanic Isolation Transformer 2KVA-60KVA power range for Single phase 10KVA-200KVA power range for three phase IGBT and PWM technology Automatic By-Pass system Maintenance By-Pass Switch Internal Battery Option Extendable Battery Duration Operator Panel with LCD Display TS EN ISO 9001: 2015 Quality Certified It is produced on order

Copper has always been the standard material for electrical wiring systems. Because it can flow electricity very easily as it is a good conductor. We offer a comprehensive range of copper wire to our clients in various specifications of diameter and length.These hi-quality wire have excellent electrical and thermal properties and supplied with spools, coils or straightened. They are Useful in motor winding wire, cables, transformer winding, telecommunications, explosives, fuse wires, railways and many applications. They are produced, hard or annealed by copper wire rods which are drawn down to thickness 1,40 mm - 8mm. They are according with TS 3, DIN EN 13601, DIN EN 13602. General properties material with minimum copper content 99.95%.

Copper has always been the standard material for electrical wiring systems. Because it can flow electricity very easily as it is a good conductor. We offer a comprehensive range of copper wire to our clients in various specifications of diameter and length.These hi-quality wire have excellent electrical and thermal properties and supplied with spools, coils or straightened. They are Useful in motor winding wire, cables, transformer winding, telecommunications, explosives, fuse wires, railways and many applications. They are produced, hard or annealed by copper wire rods which are drawn down to thickness 1,40 mm - 8mm. They are according with TS 3, DIN EN 13601, DIN EN 13602. General properties material with minimum copper content 99.95%.

Copper has always been the standard material for electrical wiring systems. Because it can flow electricity very easily as it is a good conductor. We offer a comprehensive range of copper wire to our clients in various specifications of diameter and length.These hi-quality wire have excellent electrical and thermal properties and supplied with spools, coils or straightened. They are Useful in motor winding wire, cables, transformer winding, telecommunications, explosives, fuse wires, railways and many applications. They are produced, hard or annealed by copper wire rods which are drawn down to thickness 1,40 mm - 8mm. They are according with TS 3, DIN EN 13601, DIN EN 13602. General properties material with minimum copper content 99.99%.

Central cooling systems are designed units to use for the removing of thermal loads which are pointed at more than one cooling point. The system will have the appropriate capacity depending on the desired power designed in the same or different capacities of compressors. Electric power supply and control panel are on the unit, and all connections are made in the factory. Scrolling, hermetic, semihermetic varieties of central system are available. Semihermetic or screw compressors are used in the central system for the center of industrial plants with high cooling capacity. Hermetic and scroll compressors are used to lower capacity the projects. Leakage tests of outdoor unit are performed by pressing nitrogen. Electrical panel and all automatic control elements are shipped as ready for assembly. It is manufactured in accordance with European Union norms and CE certificate.

We can supply EPS-EPP shape moulding machines, suitable for various applications, product types and mould sizes. While our traditional range of machines is of hydraulic types, we can also supply electrical shape molding machines as well. You can learn more about our products and services by visiting our web site - https://www.estechtic.net/ or you can send your inquiries to fr@estechtic.net.

Turn Table, precisely provide to welding by turning clockwise or counterclockwise of parts connected to it horizontally. It also enable movement in the rotation axis. . The work table is operated with a T-slot turntable to ensure that the workpieces are fully fixed to the work table. It is designed with the aim of increasing efficiency, eliminating the need for welding in difficult positions and considering ergonomics of employees.

Rotators are resistant to severe working conditions and are designed to rotate work pieces weighing 5 to 150 tons. It enables the cylindrical parts weld sensitively by rotating clockwise or anticlockwise. In line with customer’s demanded diameter and tonnages, its production can be made auto regulative or conventionally. Features -Through polyurethane coated wheels rotation quakes and uploading hitting are absorbed during welding. -In the applications requiring high temperature and major load, featured steel wheels can be used as well. -Wheels possess self-adjusting feature for small or big diameters. This adjustment can be made with ball screw or by hand optionally. -For the manual usage, digital control or analog entries can be integrated to Column Bom systems. -Sensitive rotation with low gaped reducer -Synchronised working feature -Power transmission with flat gears

*Power 1500W; 220-240V, 50/60Hz *Steam 25gr/min *Tank capacity 220ml *Extra-large head *Accessory: brush for thick fabrics *Automatic continuous steam supply through the electrical pump *Can choose small or big steam *Power on/off button *Removable water tank

Product Code M077-4E Energy Type Gas / Electric Voltage (Volt/Hz) 230-400 / 50-60 Power(kW) 6,4 Capacity (Radyan Quantity) 4 Dimensions (cm) 50x71x115 Weight (Kg.) 60 Motor Power Watt 230 /14

VIRTU Electromechanical Lightning Strike Counter is designed for takes all conducted lightning strikes under record. Likewise lightning terminals and grounding systems, lightning strike counters should alse be durable to extreme currents. VIRTU Lightning Strike Counter works with the arrested strikes own current and doesn't need any external battery. Counting digits can be modified as to client's preferences from 3 to 7 number digits. Light and being accordance with IP65 level durability makes VIRTU a perfect instrument to complete a lightning protection system.

HELIA Early Streamer Emission (ESE) lightning terminal can anticipate all other elements and items within its protectable range according to its protection level radius by intercepting the lightning strikes and conducting these strikes into the earth ground through the safest and projected ways. HELIA ESE Terminal work as to principle of creating IONs by its internal ION GENERATION channels. This structure itself allows the terminal to conduct the high voltage lightning strikes to the earthing system then to the earth at the safest way.

COMET Early Streamer Emission (ESE) lightning terminal can anticipate all other elements and items within its protectable range according to its protection level radius by intercepting the lightning strikes and conducting these strikes into the earth ground through the safest and projected ways. COMET ESE Terminal work as to principle of creating IONs by its internal ION GENERATION channels. This structure itself allows the terminal to conduct the high voltage lightning strikes to the earthing system then to the earth at the safest way.

Mini Razzor 150 cable granulator is advanced-level cable and electronic waste recycling machine. With the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. The machine is equipped with all needed to work independent. Just supply the electricity and you can start to recycle your cable or electro waste for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.

SINC Razzoor Series cable granulator is advanced-level cable and electronic waste recycling machine, with the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. The machine is equipped with all needed to work independent, just supply the electricity and you can start to recycle your cable or electro waste, for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.