Machine construction - Import export

Custom made Pin bushing manufacture services

Efficient material utilization in production. Fast cutting for cost-effectiveness in production. Cost reduction through minimal waste rates. Economical production from sheet materials compared to machining. High precision due to the machine’s stable construction and modern control and measurement technology (accuracy in all dimensions 0.01 mm). Drilling hole diameter is up to 0.4 mm of sheet thickness Marking can be done on the work pieces. No burrs or heat deformations on cutting surfaces. More flexible design possibilities.

Fullgear CT Series, is a high performance gear oil which is developed for automatic or automatic/manual (powershift) transmissions, final drives, wet brake and clutch systems of construction equipments under extreme operating conditions. It is developed for leading equipment manufacturers, especially Caterpillar construction equipments under extreme operating conditions.

Fullgear CT Series, is a high performance gear oil which is developed for automatic or automatic/manual (powershift) transmissions, final drives, wet brake and clutch systems of construction equipments under extreme operating conditions. It is developed for leading equipment manufacturers, especially Caterpillar construction equipments under extreme operating conditions.

Fullgear CT Series, is a high performance gear oil which is developed for automatic or automatic/manual (powershift) transmissions, final drives, wet brake and clutch systems of construction equipments under extreme operating conditions. It is developed for leading equipment manufacturers, especially Caterpillar construction equipments under extreme operating conditions.

Fullgear FD 10W-30, is a multi purpose transmission oil for manual or automatic transmissions, hydraulic, axle, wet brake systems, final drives and PTO (Power take Off) of construction machines. Quality base oils and anti-friction additives in its formulation provide high performance while power transmission in moving components.

Fullgear FD 20W-40, is an construction vehicle gear oil which is developed with quality base oil sand advanced technology additives for limited slip(LS) differentials, wet brake system axles and final drive units.

Fullgear FD 80W-140, is an construction agricultural vehicles gear oil which is developed with quality base oils and advanced technology additives for limited slip (LS) differentials, wet brake system axles and final drive units. Extreme Pressure (EP) additives in its formulation provides effective wear protection even under high stress.

Fulltrac Fluid III 20W-30, is a multi purpose transmission oil for manuel transmission, hydraulic, axle, wet brake system, final drives and PTO (Power Take Off) of construction and agricultural machines. Quality base oil oils and anti-friction additives in its formulation provides high performance while power transmission of moving equipments.

High performance injectable epoxy chemical anchor approved for daily anchoring work and sprout connections in concrete Main materials: Concrete (cracked), Concrete (uncracked) Main material condition: Wet, Dry, Underwater, Flooded Approvals / test reports: ETA Features High performance in cracked and non-cracked concrete Suitable for use in indoor and outdoor applications, as well as in a wide range of base material conditions (dry, wet, flooded) (depending on rod specifications and approvals) Long operating time provides greater flexibility in installation A wide range of accessories are available (plug pistons, steel brushes, rechargeable application guns) Easy cleaning method simplifies installation

Superior performance wedge dowel (carbon steel) for high static and seismic loads in cracked concrete Material, corrosion: Carbon steel, zinc plated Head configuration: External thread Approvals / test reports: ETA, FM (Factory Mutual), Seismic, Fire Features More economical, optimized dowel designs – wider embedment depth range, flexible edge and spacing allow more economical designs to be created using smaller base plates and façade brackets Faster and easier correct installation – no hole cleaning required (M8-M20) and ready for automatic pre-tensioning with Hilti Adaptive Torque tool (M8-M16) Design support available – use the PROFIS Engineering Software Suite to simplify steel-concrete connection design or contact your local Hilti Engineering Team for advice on more complex projects Easier inspections – head marking showing dowel type and length simplifies quality control after insertion

Superior performance injectable epoxy chemical anchor approved for sprout connections and heavy anchoring jobs Main materials: Wood, Some natural stones, Concrete (cracked), Concrete (uncracked) Main material condition: Wet, Dry, Underwater, Flooded Approvals / test reports: BZS/shock, DIBt, ETA, Seismic, Fire

While the spring leg disc harrow performs more effective shredding and mixing process than the other known disc harrows due to its spring independent disc structure and machine construction, each disc runs separate from each other thanks to its independent bearing. By means of the springs in each disc, the breakage and damages that may occur on the chassis are eliminated by the back and forth movement of the discs when the machine is stuck because of an obstacle. It is less affected by the surface

senseA50 and senseA45, which is an industrial equipment to control and drive screw air compressors. Main advantages of senseA series; 1)Software and Hardware are developed internally and can be customized to some extend based on customer needs 2)Localizations and customer branding can be applied 3)Can work under principal of Equal Aging up to two compressors 4)Competitive pricing with great features 5)We can supply all necessary sensors which can ease the procurement process.

Description Polyester-based adhesive with high strength Fields of Application Machine construction, application to vertical surfaces thanks to fast-curing capability, installation of bathroom and kitchen assemblies, and hollow bricks. Reusable by replacing the mixer tip. .

VK 420 is designed for the precise V cutting and 90° end notching operations with minimal off cut size on aluminum and PVC profiles. Machine is constructed to minimize the off cut size Hydro-pneumatic V sawing head infinitely adjustable according to the profile Manual adjustable of back fence working in T slot mechanism Double hand safety operation External adjustment of hydro-pneumatic saw blade feeding 90 degree of notching operation (optional) STANDARD ACCESSORIES • 2 x T.C.T saw blades, Ø 420 mm • 2 x Horizontal pneumatic clamps • Service spanner • Air gun • Spray saw blade lubrication system

PRODUCT INFORMATION KP 120 machine is designed and constructed for the hydraulically crimping and correct assembly of aluminum profiles. The machine is semiautomatic and the machining cycle of various units are manual controlled by user who always stays outside of the dangerous area. It is designed through the pneumatically crimping system Steel construction of the machine table that is strong and lasting Practically adjustment of the knives according to the shape and height of the profiles Practically adjustment of the cylinder feed and profile stops by means of the millimetric ruler The machine is equipped with the pneumatic (for clamps ) and hydraulic (for crimping ) foot pedals for the operation control during the machining cycle Double-acting centering set-square returns to the home position under the table after crimping Powerful hydraulic pump with 2 x 5 tons capacity Protection plates made of Polyamide material to prevent being scratches on the profile surface

KP 120 machine is designed and constructed for the hydraulically crimping and correct assembly of aluminum profiles . The machine is semiautomatic and the machining cycle of various units are manual controlled by user who always stays outside of the dangerous area. It is designed through the hydrauliccally crimping system Steel construction of the machine table that is strong and lasting Practically adjustment of the knives according to the shape and height of the profiles Practically adjustment of the cylinder feed and profile stops by means of the milimetricruler The machine is equiped with the pneumatic (for clamps ) and hydraulic (for crimping ) foot pedals for the operation control during the machining cycle Double-acting centering setsquare returns to the home position under the table after crimping Powerfull hydraulic pump with 2 x 5 tons capacity Protection plates made of Polyamide material to prevent being scrathes on the profile surface

Functioning as Can Oto Radiator for 36 years we provide services for our customers, producing radiators for automobiles, heavy construction machines, heavy agricultural machines. We implement high quality services for all products manufactured by our company. Our company provides 1 year guarrantee for all our products. By producing quality equipments, we increase service life of machines. Together with our technical support service and customer service team, we guarantee the smoothness of our products. We understand customer's need and produce new types of equipments. Size, height, width of radiators can be adjusted according to your needs. radiators-oil coolers air cooler autospeartparts radiatormanufacturer generatorsradiators radiatorproducer industriel_radiator_service carradiator_inturkey autoradiator excavatorradiator otokalorifer aftercooler intercooler_radiator industriel_radiator agriculture_radiator agriculture_spareparts

Functioning as Can Oto Radiator for 36 years we provide services for our customers, producing radiators for automobiles, heavy construction machines, heavy agricultural machines. We implement high quality services for all products manufactured by our company. Our company provides 1 year guarrantee for all our products. By producing quality equipments, we increase service life of machines. Together with our technical support service and customer service team, we guarantee the smoothness of our products. We understand customer's need and produce new types of equipments. Size, height, width of radiators can be adjusted according to your needs. radiators-oil coolers air cooler autospeartparts radiatormanufacturer generatorsradiators radiatorproducer industriel_radiator_service carradiator_inturkey autoradiator excavatorradiator otokalorifer aftercooler intercooler_radiator industriel_radiator radiators-oil coolers, air_cooler,

PRECISION STE EL TUBES •EN 10305-1 •EN 10305-2 •EN 10305-3 •EN 10305-4 (HPL) •EN 10305-5 Seamless, cold-drawn precision steel tubes EN 10305-1 Seamless, cold-drawn precision steel tubes have a particularly high dimensional tolerance with regard to the outer and inner diameter and/or the wall thickness. T Facts and Figures Diameter (OD)4 mm – 125 mm Wall thickness (WT)0,5 mm – 13,0 mm MaterialE215, E235, E255, E355, C35E, C45E 16Mo3, 25CrMo4, 42CrMo4, 25CrMo4 other materials upon request Treatment condition+C +LC, +SR, +A, +N TestsEddy current testing EN 10893-2 extra charged: Ultrasonic testing EN 10893-10 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

Material: Galvanized, Stainless and Aluminum Diameter: 0.50-1.20mm l:1200/1500mm Insulation: Rubber sheet (inside/outside) Coating: In desired paint codes Production : Full sealing with mastic in fully automatic machines Joining : 20/25/30 mm with self-flange and drive-in flange

Material: Galvanized, Stainless and Aluminum Diameter: 0.50-1.20mm l:3000/6000mm Insulation: Rubber sheet (inside/outside) Coating: In desired paint codes Production: In automatic machines Joining : Flanged 30/40/50 mm

Press Line Hydraulic Press, Handling Table, Foundry, Rotary Furnace, Homogeneous Furnace, Cooling Furnace Aging Furnace, Double Puller with Fly Saw, Powder Coating Line, Cooling and Quench Systems,

YZ series thermoforming filling and sealing machines (FSS)for food packaging capable of filling different types of pasty and liquid products. The machine is constructed of stainless steel and corrosion resistant materials for easy maintenance and sanitation. Cehuma has designed every section of YZ series thermoformers to meet hygiene and cleaning requirements demanded by today's food packaging industry. Main Aplications: Cream cheese, cream spreads, jellies, juices, water, dairy products, chocolate, honey, jam, butter, margarine, mayonnaise, sauces, puddings, ketchup, coffe cream and all types of yoghurt.

CM series thermoforming machines for food and non food packaging capable of processing both flexible and rigid films up to a width of 600 mm and thickness of 700 µm with modified atmosphere (MAP) and vacuum options. The machine is constructed of stainless steel and corrosion resistant materials for easy maintenance and sanitation. Frame is constructed with stainless stell shafts and sheets to provide extraordinary strength and rigidity to the machine. Cehuma has designed every section of CM series thermoformers to meet hygiene and cleaning requirements demanded by today's food packaging industry. Main Applications: Meat and meat products (Such as; sausage, smoked meat), cheese, prepared meals, chicken, fish, sea foods, pizza, olives, dates, medical devices .....

Dilatation expansion joints are the interconnection elements that ensure uninterrupted and efficient operation of the installation in the joints of buildings with different foundations (Dilatation), by absorbing strain and rupture that can occur in the pipelines due to building collapses or earthquakes, and lateral deviations. These types of expansion joints consisting of double bellows can be fixed to the desired expansion amounts by using limit rods. They can be used at all Dilatation points in building passages.