Air treatment - Import export

"What Mikropor offers you with MKE SERIES: - Low pressure drop saves compressor power - Quick start and reaction time provides additional production time - Every dryer is specially designed with the right components to consume the lowest energy - Highly energy efficient and environmentally friendly R134a refrigerant across all models. - R513a refrigerant is optional. - A state-of-the-art heat exchanger design provides the highest cost saving in the industry - Best in class refrigerant compressors consume less energy against competition dryers - Pressure switches control the condenser’s fan motor for saving energy and letting the system operate at desired conditions - This is not only a dryer, but an air treatment package that delivers an air quality of class 1.4.1 as per ISO 8573:2010 due to integrated filtration"

Dampers play a crucial role in the functionality of industrial ductwork as they are designed to control the flow of air or flue-gas within the ducts. The primary purpose of most dampers is to act as shut-off dampers. This means they are either fully open or fully closed depending on the operational requirements. However, some dampers are specifically installed to modulate the gas flow, allowing them to function in various partially open positions. The variability in damper functionality caters to different operating scenarios and provides flexibility in managing the flow of air or flue-gas through the duct system.

"It is highly crucial to have clean and dry air in the system to have profitable and efficient manufacturing worldwide. Mikropor MMD-VP Series Modular Vacuum Purge Heatless Desiccant Air Dryers remove water vapor from compressed air, stop corrosion, and inhibit the growth of micro-organisms in critical applications. Mikropor MMD-VP Series Modular Vacuum Purge Heatless Desiccant Air Dryers supply high-quality dry air which has -40 °C dew point or optionally -70 °C dew point to the system with affordable prices and reliable way. In that way, the production machine has a longer life, minimum maintenance costs, and processed product is produced in a healthy and safe way. The new vacuum purge technology decreased air loss during the regeneration process and make the production more cost-efficient way."

"The light weight modular design desiccant dryer series brings a new concept in compressed air technology, offering total installation flexibility to meet specific needs. Mikropor’s Modular Desiccant Dryers are less than half the weight and size of a traditional twin tower design, allowing even the largest models to be easily moved through a standard doorway. Mikropor’s innovative Modular Air Dryers make it easier and more affordable than ever to deliver high-quality compressed air for virtually herever it’s needed. Mikropor Modular Desiccant Dryers have cosmetic beauty and can be located in clean, pleasant environments eyesore. Offered in sizes from 5 m³/h to 400 m³/h with dew point of -40°C to -70°C (optional) these dryers are equipped with everything you need, requiring only air inlet/outlet connections."

"This design achieves a hyper-efficient 100% contact between the air and refrigerant circuits, delivering state-of-the-art performance and great cooling efficiency. The state-of-the-art 3-in-1 design features very low differential pressure delivering significant energy savings. The 3-in-1 Heat-Exchanger is compact and allows the dryer to be smaller and reduces the space required for the dryer. Mikropor offers a variety of 3-in-1 dryers equipped with the 3-in-1 Heat-Exchanger to meet a full range of capacity and power requirements."

"Mikropor is proud to announce that the new MK-DS series explicitly prevails over any other type of refrigerated air dryer by achieving everyone’s goal to lower energy costs. The MK-DS Series, with a specially designed heat exchanger and digital scroll compressor, provides unrivalled energy efficiency in a refrigerated air dryer. The challenge of maintaining a stable dewpoint and saving energy can be overcome with this latest technological development. Combining Mikropor’s expertly designed heat exchanger, leading filtration technology and digital scroll compression in Mikropor’s MK-DS dryers provides the ultimate energy efficiency solution for compressed air systems with varying levels of air demand."

"Most compressor manufacturers do not use an aftercooler on their piston type compressors. Therefore compressed air exits the compressor at about 100°C temperature. Mikropor's High Temperature Dryer has an aftercooler to reduce the inlet temperature."

Mikropor MDA Heatless Desiccant Air Dryers provide constant -40⁰C (-70⁰C Optional) pressure dew point.These dryers are designed to supply clean and very dry compressed air for critical applications. Pre-filters and after-filters are standard on all Mikropor Heatless Air Dryers to keep the air stream clean and maintain the integrity of the desiccant medium. A very reliable electronic controller is utilised so the dryer operates perfectly through its service life. MDA Heatless Desiccant Dryers are equipped with special valves and high quality desiccants in order to assure performance and provide the lowest pressure drops available in the market.

Cycling refrigerated dryer design helps you achieve optimal performance at a lower cost compared to a Digital Cycling design.To reduce energy consumption, the dryer refrigeration system automatically deactivates during periods of low load and features a patented heat exchanger and thermal mass circuit.MCY Series Air Dryers are highly reliable, efficient, have small space requirements and offer low cost ownership. Integration of pre / post filtration within the dryer cabinet saves labour time, installation cost and valued production space. The compact size also offers flexibility and economy during transportation.

With over 30 years of experience Mikropor manufactures the best performing replacement elements in the industry. Mikropor offers four layers of Superior Protection-from 1 micron to 0.01 micron. Durable element construction and an efficient drain layer ensure continued performance with optimal element change periods.Additionally, High efficiency Micro-Glass nanofiber media (80 times finer than Cellulose Fiber) delivers higher targeted efficiencies, longer service life, wide chemical and synthetic lubricant compatibility even at extreme working temperatures.Mikropor assures that the replacement elements perform equal to or better than the original elements. Replacement elements have been designed and tested in ourstate-of-the-art test laboratories.

Mikropor Compressed Air Filters have been designed to meet all requirements of the compressed air filtration world. These air filters provide more comfortable usage for end users with an increased endurance, higher efficiency at lower pressure drop and more port size options.The air filters have four efficiency ratings, removing contaminants as small 0.01 micron at up to 290 psi (20 bar)- 1/4” to 3” NPT/BSP pipe sizes. A protected auto float drain (2 mm orifice) is standard for optimal and reliable removal of liquid contaminants. These air filters have a zero-porosity aluminium and durable epoxy powder-coat finish, along with a corrosion-resistant internal coating for a long service life. Filter combinations are configured to meet specific application requirements. Filters comply with PED and perform as per related ISO 8573 standards. These filters may be equipped with differential pressure gauges for easy maintenance and energy efficiency.

A centrifugal blower and high efficiency heater eliminate the use of valuable compressed air for desiccant regeneration.The completely automatic drying system uses blower to pull ambient air and pass it through the heater. This hot air stream flows opposite to drying flow direction. Hot air above 200⁰C regenerates the moisture inside desiccant bed and strips it completely of all moisture. The advanced control system monitors the dew point and adjusts the heating/regeneration accordingly thereby providing valuable energy savings.

MVH Filters are available with galvanized steel, aluminium or stainless steel frame. They are suitable for air conditioning systems in hospitals, laboratories and museums and Industrial processes such as pharmaceutical, food and microelectronics.

Introducing MV4HT, V-Bank type high-temperature filter. Crafted with a galvanized steel frame and microglass fiber media, it offers M6 to F8 efficiency. The high-temperature gasket ensures resilience up to 350 degrees, making MV4HT the optimal choice for demanding applications in the automotive industry

Introducing the MV Series, a V-Bank type filter designed for superior air quality. With a plastic frame and microglass fiber media, it spans from M6 to F9 efficiencies or ISO ePM10 / ISO ePM1. Ideal for HVAC, cleanrooms, and air purification from smokes to pollens. MV Series offer a compact design, high surface area, and energy-saving efficiency. The V product line ensures compliance with VDI 6022, assuring top-notch performance and reliability.

Mikropor V-BANK type carbon series is engineered to effectively eliminate airborne particles and address a broad spectrum of odors under high air flow conditions.

MTF-H SERIES Filters are constructed using Micro Glass Fiber. Simply, there is no better performing filter media available to meet the flow performance requirements and high efficiency filtration needs for turbo machinery.

Introducing the MPR Synthetic Media Filter – a high-performance solution for diverse air filtration needs. Crafted with a molded plastic frame and synthetic media, it achieves efficiency levels from G4 to M6. Ideal for automotive, gas turbines, and general ventilation in offices, industrial, food processing, and labs. Boasting a low initial pressure drop, high dust-holding capacity, and a rigid self-supporting design, it ensures durability and energy efficiency. Plus, it's incinerable, aligning with eco-friendly practices. Upgrade to MPR for reliable, efficient filtration in various applications.

MPG Filters are fine filters with glassfiber media and galvanized steel frame. They are available between M5-F8 efficiency (EN 779:2012) / ISO ePM10 - ISO ePM1 (ISO 16890). They are suitable for HVAC and pre-filter of absolute filters applications.

MPF filters are mini pleated filters with metal, plastic or cardboard frame. They are available between M5-F9 (EN 779:2012) efficiencies / ISO ePM10 - ISO Epm1 (ISO 16890). . These filters offer high surface area with low energy use which make them optimal choice for HVAC applications.

With more than 35 years of air filtration experience, Mia Air offers you the latest filtration technology. Mia Air has been designed to provide fresh clean air by trapping 99.999 % of ultra-fine particles in the air. It has 11 m2 filtration area and 100 m2 effective room coverage. By using HEPA filtration, which traps extremely small particles, Mia Air can transform polluted air into clean air in seconds.

With a cardboard frame and metal-free production, these filters offer advantages like disposability, moisture-resistant cardboard frame, and tidy pleat spacing. Customizable in width and height, metal-free construction ensures versatility. Incinerable for eco-friendly disposal. Perfect as pre-filters for HVAC and gas turbines

With options of plastic or galvanized steel frames, these filters offer M6 to F9 efficiencies. Their compact and rigid design ensures durability, while low energy consumption and high surface area making them ideal for HVAC systems, pre-filters for cleanroom applications, and industrial processes.

Your solution for high-temperature challenges in the automotive industry. With high efficiency and an extensive surface area, these filters thrive in temperatures up to 270 degrees. Trust MASHT for top-tier performance and durability, ensuring optimal air quality in demanding automotive environments.

Introducing our Gel-Sealed HEPA Filter. Depths options are 73mm,80mm, 88mm,104mm, it suits diverse HVAC systems. Designed for critical spaces like hospitals, labs, museums, and industries (pharmaceutical, food, microelectronics). "

Mikropor offers a wide variety of solutions including high efficient EPA, HEPA & ULPA filters and leakage free hood and box variations. Through individual testing Mikropor guarantees the performance and impermeability (leakproof) by using he EN 1822 test standard. All EPA, HEPA & ULPA class filters are delivered with test certificates.

MVH Plastic Filters consist of Microglass Fiber and Plastic frame. They are suitable for air conditioning systems in hospitals, laboratories and museums and Industrial processes such as pharmaceutical, food and microelectronics.

MHH Filters are optimal choice for cleanroom applications and laminar flow cabins. They are made of extruded anodized aluminium and many available collar diameters. Such as, 150mm, 200mm, 250mm, 300mm, 400mm.

Hepa Filter Box is designed to be used in any space requiring high-level climate control, such as clean rooms, operating rooms, and sterile environments.