Steam boiler - Import export

The construction of a boiler involves a diverse range of materials and components, broadly categorized into boiler steels, structural steels, and bought-outs (BOs). These materials are chosen based on factors like weldability, strength, and compliance with safety standards to ensure integrity and reliability.

The construction of a boiler involves a diverse range of materials and components, broadly categorized into boiler steels, structural steels, and bought-outs (BOs). These materials are chosen based on factors like weldability, strength, and compliance with safety standards to ensure integrity and reliability.

The construction of a boiler involves a diverse range of materials and components, broadly categorized into boiler steels, structural steels, and bought-outs (BOs). These materials are chosen based on factors like weldability, strength, and compliance with safety standards to ensure integrity and reliability.

Steam boilers with water pipes are boilers in which the water circulates and evaporates in the pipe. This high-capacity, high-capacity, high-capacity steam boiler. The combustion chamber is surrounded by a pipe-pipe-pipe joint. As a fuel in water pipe steam boilers; They use solid fuel, liquid fuel and gas fuel. n terms of safety, the water is more secure due to circulation in the pipes. Because of their lower water volumes, they are boilers that enter the regime more quickly.

Thanks to large contact surface of water with smoke pipes, high operational safety and longer boiler life are guaranteed. The small water volume provides a better inside circulation and safe heat transfer with faster steam generation time. Increased strength and flexibility with corrugated furnace that is manufacturing by Eralp in 900°C degrees. In 3-pass Shell boiler design, the heat load of furnace is less than 1,2 MW/m. The result of this design is an ideal combustion with less NOx emissions, thus it causes lower fuel consumption. Further gains in efficiency can be obtained by using economizer for feeding water by preheating and air-heater for combustion air heating. The energy of flue gas can be recovered and the efficiency of boiler system is increased 5-8%. According to pressure of boiler, efficency increase up to %91. Eralp manufactured the highest efficent boiler (totally efficiency=%98,4) with two economisers which efficency tested and approved by Notify Body.

They are high-quality steam generating equipment used in all industrial plants to obtain steam required for processing. Steam boilers with flame smoke pipes can be produced as flat ashtrays and hot ashtrays. Solid, Liquid and Gas fuels are used as fuel type. Eralp Makina Kazan In 2005, it is proud to be the most productive employee of Turkey with double economy working with natural gas (total system efficiency = 98,4%). Yield tests of our product produced by Yildiz Technical University and ISKAV Foundation.

Steam is a pressure vessel manufactured to store excess steam or waste vapors out of the operation of aquaria and to be used again when necessary. They are mainly used in gas concrete installations especially for the purpose of recovering the waste steam from the process. There are water and vapor phase zones in the steam chamber. The volume is 4/3 water phase. Steam The steam is stored in the battery in the hot water phase by injecting the steam into the water by means of the diffusers located below the water level and dissolving it in the water. When the steam is needed, the pressure of the hot water is lowered and the steam produced by the resulting phase change is transferred to the process to be used again. Using a steam bath; Up to 25% energy saving is achieved. They can both discharge steam and discharge at the same time. Suspended solid materials which are dragged together with the steam collapse under the liquid and the bluff is removed from the environment and the steam is

Capacity from 0,5T to 50T

•Steam capacity between 0,10 – 6 tons •Operating pressure under 6-10 bar •Liquid, gas and solid fuel options •Portable ready system

•Steam capacity between 1-30 tons •Fast steam production •Reaction to sudden bursts of steam •Special design and technology •Full automation •Double burner technology •Automatic ash discharging

•3-pass system •0-16 bar operating capacity •Low flue gas emissions •Maximum efficiency with minimum fuel •Patented special burner design for solid fuels

•Steam capacity between 200-1500 kg •Operating pressures between 6-10 bar •Horizontal type •95% efficiency ratio •Flue emission guarantee

•Steam production capacity between 1-25 tons •Operating pressure under 2-18 bar •Specially reinforced burner room •95% efficiency ratio •Flue emission guarantee

CBK-S solid fuel series is powered by our patented burner technology. •Our boilers are 9% more fuel- efficient than the competition. They are designed for maximum performance with minimum fuel consumption. •Steam production capacity between 1-20 tons •Operating pressure under 1-18 bar •Maximum efficiency (87%- 88%) among the existing solid fuel fired boilers in the market •3-pass customized design •Flue gas emission guarantee (except for fuel sources)

Steam Boiler 100 kg/h to 20.000 kg/h 3 Bar to 30 Bar Gas , Diesel or Coal

LIQUID AND GAS FUEL, SCOTCH TYPE THREE-PASS, HIGH PRESSURE STEAM BOILERS 175 kg / h - 28.000 kg / h steam production capacity 3 - 16 bar operating pressure •Products can burn fuels such as natural gas, lpg, lng, diesel, fuel oil, biogas. You can choose the burner brand according to your request. EKOTEK, Trademark registered and controlled and audited by ISO 9001: 2015 quality management system.

Water tube Steam Boiler, superheated or saturated steam, Gas, Liquid or Solid fuel options, Turnkey project solutions.

Fast Steam Generator, designed as Vertical or Horizontal, generating steam in 3 to 5 mins after cold start-up, Gas & Liquid fuels options.

1 ton/h to 18 ton/h Industrial Fire tube Steam Boiler, generating superheated or saturated steam, fired Gas, Liquid and/or Solid fuels, turnkey project flexible solutions as per customer demand.

Water tube Steam Boiler, generating superheated or saturated steam, fired Gas, Liquid and Solid fuels, turnkey project solutions.

Bundles are used for generating superheated, saturated steam and hot water to meet the requirment of process by utilising waste heat in power plants. We manufacture bundles according to ASME and EN standard with high frequency welded fintubes which is produced by Eralp. *We are manufacturing Solid and Serrated Type. *We can weld fin material thickness between 0,8 mm - 2 mm for high frequency welded spiral finning tubes. *It is possible to weld fin thickness less than 0,8 mm but it is not recommended. *Pitch distance is determined according to pipe diameter and thermodynamic calculation. We are able to manufacture fintubes pitch in the range of 3,5 - 20 mm.

export

Waste heat recovery boiler, in steam, water or thermal oil, fire-tube or water tube, designed as per exhaust gas parameters, turnkey project flexible solutions.