Assembly and disassembly - Import export

Pastes are essentially lubricants (oils, thickeners and additives) with a higher content of thickeners and solid lubricants. Depending on the selection of the additives, they can be used in multiple applications. Lubricating and assembly pastes with a high content of solid lubricants provide excellent lubrication and separating effect, even under extreme temperatures and loads. Due to the excellent media resistance, they establish a water and steam-resistant lubricant film and protect reliably against tribo-corrosion. Pastes are often used for the start-up and running-in lubrication of chucks, joints, journal bearings, pins, bolts and bushings. Furthermore they are used for the assembly and disassembly of bolted connections which are for example difficult to disassemble after high-temperature applications.

Product Features: • 18 gauge steel base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include one horizontal row of louvers for ventilation. • Choice of sloping or vertical sides by reversing case. • Includes an handle (Part number 1427C1) and holes in the top for mounting. Also includes plastic plugs if handle is not desired. • Sold pre-assembled with a two tone grey powder coat finish. Top is dark satin grey. Bottom, front and back is smooth light grey. • Comes with four self adhesive rubber feet and required hardware. • Assembled with 8 machine screws into weld-nuts for repetitive assembly and disassembly.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards for hand-held, desktop or wall mount applications. • Front and rear panels are integral part of bottom unit. • Moulded in polystyrene plastic. • Designed to meet IP54. • Assembled with four M4 x 0.7" (14mm) slotted machine screws (included) threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. Screws are hidden in a recess in the base. • Includes four M3 x 0.276" (7mm) self tapping screws for internal standoffs. • Lid is a smooth light grey (RAL 7035) and the bottom is a smooth dark grey (RAL 7012)

Product Features: • Electronic instrument enclosures, designed for mounting printed circuit boards or DIN rail mounted components. • The polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use. • Lid and mounting holes are located outside of the gasket seal. • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly and disassembly). • Heavy duty 16 gauge galvanized steel panels available. • All stainless steel hardware to avoid corrosion caused by dissimilar metals. • Gasket is a preformed, high temperature U.L. listed silicone rubber. Gasket is replaceable. • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Internal DIN rail mounting tabs.

Product Features: • Ideally suited for vertical mounting of printed circuit boards; internal side walls included moulded in card guides. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP45. • Lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Smooth black finish with black screws.

Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Thick wall design with an average wall thickness of 0.13" (3.3mm). • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (carries a UL flammability rating of 94V-0). • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Black with matte textured finish.

Product Features: • Low profile - ergonomically designed for a comfortable fit into the user's hands. • Perfect for instrument or mobile data enclosures requiring a touch screen. • Choice of three sizes. All available with or without battery compartment. • Moulded from flame retardant ABS plastic, choice of black or grey - material carries a UL flammability rating of 94V-0. • Enclosure is assembled with six (6) - M3-0.5 x 18mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Integral brass bushings are factory inserted into the top half of the enclosure. • Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54. • P.C. board standoffs are moulded into case top and bottom halves.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Standard versions from flame retardant ABS plastic (carries a UL flammability rating of 9V-0). • On standard and water-tight versions, countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly required. • Economy version is moulded in general purpose ABS plastic. • Economy version utilizes self tapping screws into plastic posts (no brass inserts). • Standard and economy versions are rated IP54, but can be upgraded to IP66 with gaskets and screws with O-rings. • Water-tight versions are rated IP66. • Stocked in black and grey with matte textured finish.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Also suited for vertical or horizontal mounting of printed circuit boards (using optional P.C. card guides). • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Stocked in black with matte textured finish.

Product Features: • Uses all machine screw and PEM nut construction, perfect for applications where repetitive assembly and disassembly are required. • Light weight design - all aluminium, type 5052 H32 for easy modification. • Strong design construction using: • 0.125" (3.2mm) thick - side panels and rack mount brackets • 0.064" (1.6mm) thick - front and rear panels • 0.062" (1.6mm) thick - top and bottom panels • Can be used with or without rack mounting "ears" or brackets (included). • Enclosure is finished in rugged, satin texture, black powder paint. • Includes top, bottom, side panels, front and rear panels, rubber self adhesive feet, rack mount brackets are all hardware. • Pull handle accessory kit available. • Easy access to inside, only 4 screws need to be removed from any of the 6 panels for internal access. • Internal aluminium chassis panel is optional. • Knockdown design ships unassembled for easy handling and shipping protection.

Product Features: • Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure half is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Two sets of vertical 1.5mm (0.062") P.C. board guides are moulded into case halves front and rear. • Front and rear panels are 1.6mm (0.064") brushed aluminium with protective paper on one side. • Cases halves are secured with M3 x 0.5" x 10mm (0.39") Philips machine screws threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Integral horizontally P.C. card mounts on Eurocard centers.

Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Attractively styled and ergonomically designed for use as a "Hand-Held" instrument enclosure. • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Recessed top for membrane display or pad. • Lap joint construction provides protection against dust accumulation and splashing water. • Extra deep top and ultra shallow base are specifically designed to enhanced the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency. • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Lid is secured with Philips machine screws, threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.

Product Features: • Ergonomically designed for a comfortable fit into the user's hand. • Choice of two sizes, in two versions (with or without battery door) - in two colours (black or grey). • Perfect for instrument or mobile data enclosures requiring a keypad and display. • Both the display and keyboard areas are recessed for membrane devices. • Moulded from flame retardant ABS plastic, choice of black or light grey - material carries a UL flammability rating of 94V-0. • Handheld section of enclosure includes a dark grey overmould, soft plastic grip. • Enclosure is assembled with M3-0.5 x 18mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Integral brass bushings are factory inserted into top half of the enclosure. • Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54.

Product Features: • Ergonomically designed for hand-held comfort. • Designed to meet Ip65. • Uses a one piece silicone gasket (installed). Enclosure utilized tongue and groove construction - moulded into the top and bottom halves. • Choice of three sizes - in two colours. • Moulded in flame retardant - ABS plastic (FRABS) - UV stabilized. With a grey overmould, soft plastic grip. • Top cover is recessed for membrane display or keypad. • P.C. board standoffs are moulded into both the top and bottom of the enclosure. Standoff screws (M2) are not included. • Front panel is an integral part of the top half of the enclosure. • Choice of two enclosure colours, light grey or black - soft side "grip" plastic colour is grey. • Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.

Product Features: • Ideally suited for vertical mounting of printed circuit boards (internal side walls include moulded in card guides). • Integral card guides accept 1.5mm (0.062") P.C. cards. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Standard versions are moulded from easy to machine flame retardant ABS plastic, which carries a UL flammability rating of 94V-0. • Economy versions are moulded from general purpose (not flame-retardant plastic). • On standard versions the lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Economy versions are assembled with self tapping screws into fully plastic posts. • Black enclosures include black screws, while all others include standard nickel finish screws.

Solite Pro beds offer simple, repeatable assembly & disassembly with lightweight sections making the beds easy to transport. A reduced number of moving parts mean they are ultimately reliable in use and easy to service and clean. The range includes two variants; Solite Pro standard and Solite Pro low (where falls management is an important consideration). Both are fully electrically profiling and have an option for integral full length side rails.

The 'eco-friendly’ high performance sign is ideal for pavement, roadside and forecourt promotions. Aluminium panel display area 460x818mm, we can use vinyl lettering or a full colour printed and laminated for the graphics. Recycled PVC base provides great stability. Unique patented wedge means assembly and disassembly in seconds, with no tools required.