Extruders - Import export

Full gauge clear extruded Acrylic sheets available in size 3050mm x 2050mm in thickness of 3mm, 4mm, 5mm. Cut to size to suit your requirements.

Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 104mm, 132mm, 164mm and 224mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 66mm (1½U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 220mm • Maximum component height of 45mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include DIN Rail Clips, Clip on Mounting Brackets, etc.

Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 104mm, 132mm, 164mm and 224mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 120mm (3U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 220mm • Maximum component height of 95mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include DIN Rail Clips, Clip on Mounting Brackets, etc.

Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 104mm, 132mm, 164mm and 224mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 82mm (2U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 220mm • Maximum component height of 55mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include DIN Rail Clips, Clip on Mounting Brackets, etc.

Product Features: • Standard lengths of 40mm, 80mm and 120mm. Custom extrusion lengths are available upon request. • Fixed extrusion width of 63.5mm. • Fixed extrusion height of 30mm. • Standard anodised colours include Black, Pre-Anodised Black and Silver. Custom anodised colours are available upon request. • PCB Size: • Maximum component width of 55mm • Maximum component height of 18.6mm • Weight 1.0 kg/m. • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, Sealing Kits, etc.

Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 108mm, 136mm, 168mm and 228mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 44.2mm (1U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 200mm • Maximum component height of 31mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, etc.

Product Features: • Standard lengths of 80mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Fixed extrusion width of 169.8mm. • Fixed extrusion height of 53.8mm. • Standard anodised colours include Black, Pre-Anodised Black and Silver. Custom anodised colours are available upon request. • PCB Size: • Maximum component width of 160mm • Maximum component height of 40.75mm • Weight 3.46 kg/m. • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, Sealing Kits, etc.

Product Features: • Standard lengths of 80mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Fixed extrusion width of 108.5mm. • Fixed extrusion height of 30mm. • Standard anodised colours include Black, Pre-Anodised Black and Silver. Custom anodised colours are available upon request. • PCB Size: • Maximum component width of 100mm • Maximum component height of 18.6mm • Weight 1.38 kg/m. • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, Sealing Kits, etc.

Product Features: • Standard lengths of 80mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Fixed extrusion width of 108.5mm. • Fixed extrusion height of 45mm. • Standard anodised colours include Black, Pre-Anodised Black and Silver. Custom anodised colours are available upon request. • PCB Size: • Maximum component width of 100mm • Maximum component height of 33.6mm • Weight 1.63 kg/m. • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, Sealing Kits, etc.

Product Features: • Designed to house electronics for equipment interfacing where shelf or wall mounting is required. • Consists if an aluminium "U" shaped extrusion body and a slide-in flat aluminium bottom plate. • Slide-in plate perfect for easy mounting of components. • Steel foot "L" brackets are attached to each end. "L" brackets are punched with 0.31" (7.9mm) diameter keyholes for easy mounting of enclosure. • Rugged body constructed from extruded aluminium with a minimum thickness of .06" (1.5mm). • Available in either clear or black anodised finish, the bottom slide-in plate is finished to match. • The two end "L" brackets are matched to the enclosure. • Includes all assembly hardware. • Note: Recommended screw torque is 5 lbf/in.

Product Features: • The Sink Box series is a British designed extruded aluminium enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards or chassis horizontally. • The enclosure body is formed from a single hollow aluminium extrusion. This gives the unit high strength as well as simplifying assembly. • The aluminium extrusion has fins on one side (the top) which act as a heat sink. Aluminium end panels are attached to each end. • Extrusions are anodised in a choice of either black or clear. • The interior of the enclosure contains: • Numerous slots on both of the shorter sides to accept a P.C. board or chassis • Three "T" slots (one in the top and two in the bottom) which provide an alternative method of mounting chassis or components that need to be cooled by conduction • The single "T" slot in the top takes an M3 half-nut • The two "T" slots in the bottom take M4 half-nuts

Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • Designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded body includes a slide removable "belly" plate - except in smaller sizes "A" through "D".

Product Features: • Designed to house P.C. boards or equipment. • Easy wall mounting or shelf mounting with two removable flanges. • Sized for standard Eurocard P.C. boards. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Two piece body - with easily removable belly plate for easy access to top interior of enclosure. • Extruded body and aluminium endplates with a choice of either clear or black anodised finish. • Includes eight (8) assembly screws - either clear or black assembly screws to match enclosure panels and body. Note: Recommended screw torque i 5 lbf.in (56.5 cN.m).

Product Features: • Designed to house P.C. boards or for equipment interfacing. • Integrated slotted flanges allow for easy wall mounting. • Flange provides a completely flat bottom surface and transitions seamlessly into the extrusion body for a finished look. • Sized for 50mm wide PC boards. • P.C. boards mount into extrusions by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from extruded aluminium with a minimum thickness of 0.06" (1.5mm).

Product Features: • Uses all machine screw and PEM nut construction, perfect for applications where repetitive assembly and disassembly are required. • Light weight design - all aluminium, type 5052 H32 for easy modification. • Strong design construction using: • 0.125" (3.2mm) thick - side panels and rack mount brackets • 0.064" (1.6mm) thick - front and rear panels • 0.062" (1.6mm) thick - top and bottom panels • Can be used with or without rack mounting "ears" or brackets (included). • Enclosure is finished in rugged, satin texture, black powder paint. • Includes top, bottom, side panels, front and rear panels, rubber self adhesive feet, rack mount brackets are all hardware. • Pull handle accessory kit available. • Easy access to inside, only 4 screws need to be removed from any of the 6 panels for internal access. • Internal aluminium chassis panel is optional. • Knockdown design ships unassembled for easy handling and shipping protection.

Product Features: • Watertight - heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • End panels are rugged - yet easy to machine - diecast aluminium with full perimeter self-adhesive gaskets. • Designed to meet IP65. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).

cNET Compostable extruded net for wide range of applications. Closure with heat or metal clip, and can incorporate paper label or handle. Adjustable size with maximum 2KG of product. KEY FEATURES Superior tear and heat resistance. Can be supplied in a variety of colours. Suitable for manual fill or for fill and seal automated machines. APPLICATION EXAMPLES Fresh produce, nuts, wrapped sweets. Protection for flower bud, bottles etc. Non-food packing and presentation.

Polyflon offers FEP tubes in IDs ranging from 0.2mm up to 100mm and due to FEP being melt processable, very long continuous lengths are possible. Excellent chemical resistance, surface smoothness, transparency and purity of FEP tubing make it the material of choice in many fluid handling applications within the semiconductor, chemical process plant, instrumentation, bio-tech and medical markets.

We are able to source and extensive assortment of ice cream from across Europe, and not limited to Cones, Stocks, Tubs, Enrobed, Extruded Shapes, Cakes, Bites, Water ice, 100% fruit,

We produce and stock, as standard, an extensive range of magnetic profiles in numerous shapes and dimensions. We also extrude custom profiles to meet specific requirements. Thanks to our experience and manufacturing capabilities we can extrude a profile of any shape, and if required, adjust the composition of the magnetic material to create different pull strengths for specific applications.

Rubber extrusions in EPDM , NBR, CR, Pvc Moulded into frames with or without steel insertion. Small MOQs, Delivery worldwide, Competitive prices Very High Quality.