Glue - Import export

QBS® Safety Glue This brand new QBS® Safety Glue has been designed to use for clients with sensitive eyes and for beginner technicians. It has a very flexible drying time of around 7 seconds, which allows to set up and correct application of lashes and will generally last for around 2 weeks under proper application and care. As with any QBS® eyelash adhesive, with this Eyelash glue for sensitive eyes, you will also receive Preserve Pack, red pin, glue holder ring & Silica gel sack. Eyelash Glue for sensitive eyes Characteristics: Drying Time: around 7 seconds Bonding Period: up to 2 Weeks Fumes: very low to none Consistency: Liquid & watery Available in: 3g, 5g & 10g Bottles Shelf Life: 6 Months (3 Months once opened) Additional Products Included with this glue: special preserve pack for longer-lasting effect, glue ring holder, red pin & silica gel.

The very newest addition to our Quality Beauty Store is a Volume PLUS Glue. QBS® Volume Plus eyelash adhesive is specially formulated for volume technique, also known as Russian Volume eyelash extensions. This new product is an upgraded version of our popular QBS Volume glue. It has ultra quick drying time, moderate fumes and a very good bonding period up to 7 weeks under proper application. When buying this glue you will also receive a Magic Preserve Pack, Red Pin, Glue Holder ring & Silica Gel sack. QBS® Volume Plus Glue Characteristics: Drying Time: 1.5 Seconds Bonding Period: 7 Weeks Fumes: Moderate/Low Consistency: Liquid & watery Available in 3ml, 5ml & 10ml Bottles Shelf Life: 6 Months (3 Months once opened) Additional Products Included in the pack: special preserve pack for longer last, glue ring holder, red pin & silica sack.

Prepared for furniture construction, continuous lamellas and finger-jointed lamellas I. Length and width glued Oak solid panels (finger-jointed lamellas) Thicknesses from 19mm to 40mm, width to 700mm, lengths to 5000mm Quality AB AB/BC B/C II. Width glued Oak solid panels (continuous lamellas) Thicknesses 21,5mm, 33mm, 40mm Width from 100mm to 980mm Lengths from 300mm to 3000mm Professional supplier of Oak FJ Finger jointed panel, Oak EG Edged glued panel, Beech FJ Finger jointed panel, Beech EG Edged glued panel, Rubberwood FJ Finger Jointed panel, Rubberwood EG Edged Glued panel, Poplar/Pine Finger Jointed Panel, Poplar/Pine EG Edged Glued panel Get more information please find from http://www.ld-wooden.com

Finger jointed panels and edge glued panels in oak, beech, rubberwood, ash etc. hardwood Prepared for furniture construction, continuous lamellas and finger-jointed lamellas I. Length and width glued Oak solid panels (finger-jointed lamellas) Thicknesses from 19mm to 40mm, width to 700mm, lengths to 5000mm Quality AB AB/BC B/C II. Width glued Oak solid panels (continuous lamellas) Thicknesses 21,5mm, 33mm, 40mm Width from 100mm to 980mm Lengths from 300mm to 3000mm Get more information please find from http://www.ld-wooden.com Professional supplier of Oak FJ Finger jointed panel, Oak EG Edged glued panel, Beech FJ Finger jointed panel, Beech EG Edged glued panel, Rubberwood FJ Finger Jointed panel, Rubberwood EG Edged Glued panel, Poplar/Pine Finger Jointed Panel, Poplar/Pine EG Edged Glued panel Get more information please find from http://www.ld-wooden.com

Finger jointed panels and edge glued panels in oak, beech, rubberwood, ash etc. hardwood Prepared for furniture construction, continuous lamellas and finger-jointed lamellas I. Length and width glued Oak solid panels (finger-jointed lamellas) Thicknesses from 19mm to 40mm, width to 700mm, lengths to 5000mm Quality AB AB/BC B/C II. Width glued Oak solid panels (continuous lamellas) Thicknesses 21,5mm, 33mm, 40mm Width from 100mm to 980mm Lengths from 300mm to 3000mm Get more information please find from http://www.ld-wooden.com Professional supplier of Oak FJ Finger jointed panel, Oak EG Edged glued panel, Beech FJ Finger jointed panel, Beech EG Edged glued panel, Rubberwood FJ Finger Jointed panel, Rubberwood EG Edged Glued panel, Poplar/Pine Finger Jointed Panel, Poplar/Pine EG Edged Glued panel Get more information please find from http://www.ld-wooden.com

Rotafix Engineering Adhesive is a high strength structural epoxy adhesive, part of the Resiwood product range. The 2-part unfilled epoxy adhesive has a degree of flex which makes it well suited to wood engineering and timber applications. The slow setting nature of Rotafix Engineering Adhesive lends itself to working on site where time is needed to create and move joints prior to finalising the assembly. Additional Information: Compressive Strength: >60N/mm2 Tensile Strength: 40N/mm2 Tensile Modulus: 3GPa Flex Strength: 70N/mm2 Bond Strength: 6N/mm2 Specific Gravity: 1.1 Workable for 6 hours at 20°C Supplied with: Cartridge set Nozzle Follower plate Available Sizes: 400cc (Product code: 3560)

Rotafix TG6 Timber Grout is a filled 3- part epoxy resin repair system specifically designed for repairing and upgrading of timber beams. The resin repair system has been used extensively in period properties to upgrade timber that has been ravaged by fire, decayed or under-specified. Rotafix TG6 is a combination of epoxies and contains especially fine graded fillers. The grout is very searching and will flow into very fine fissures and cracks. This unique formula is fire rated to 1 hour. The main uses of Rotafix TG6 Timber Grout are:- Timber Resin Repair Timber Splice Wooden joist repair Beam strengthening upgrades such as modified flitch Wall pocket beam end replacement Epoxy wood filler Timber beam compression strength upgrades Rafter feet Additional Information: Compressive Strength: >50N/mm2 Tensile Strength: 17N/mm2 Tensile Modulus: 9GPa Flex Strength: 32N/mm2 Bond Strength: 3N/mm2 Specific Gravity: 1.65 Workable for 50 minutes at 20°C

Rotafix Structural Adhesive (RSA) is a high performance unfilled thixotropic slow setting structural epoxy adhesive which is used in timber engineering. The slow setting nature of the epoxy adhesive allows the manipulation of timber joints for a period of time. This is particularly useful for flooring boards, roofing sheets or complex joints. RSA is used extensively for: Bonding rods and plates into timber engineering repairs, such as Timber Resin Splice Upgrading timber strength using bonded in flitch plates GluLam delamination repairs using rods Construction in wood Structural joint glue Moment resisting joints Stressed skin floors Additional Information: Compressive Strength: >60N/mm2 Tensile Strength: 38N/mm2 Tensile Modulus: 2GPa Flex Strength: 70N/mm2 Bond Strength: 6-10N/mm2 Specific Gravity: 1.1 Workable for 6 hours at 20°C

ImpactPUR® is a two-component polyurethane adhesive which is used extensively in the hygienic cladding industry for bonding wall panels in showers & bathrooms, kitchens, clean rooms, hospitals, schools, etc. The formulation has been designed to give ease of mixing for notched trowel applications. This filled adhesive has been formulated for the bonding of uPVC and GRP sheets to most building substrates, including brickwork, plaster, concrete, blockwork, etc. Features Part A - Polyurethane Paste, 3850 pois (approx.) Part B - Low Viscosity Liquid (foil sachet in bucket) Non flammable Service temperature between -40°C and +130°C Application temperature between +10°C and +30°C Open time 10 minutes at 20°C Resistant to water, dilute acids and alkalis and aliphatic oils. Easy to mix and apply For hygienic wall cladding with PVC sheeting use 1 x 6.5Kg kit for every 2500mm sheet or 3m2 area (8ft sheet).

The engineering range includes Epoxy, MMA’s, Acrylics, Cyanoacrylates, Threadlock, Pipeseal, Instant gasket and a multi purpose Anaerobic. ** Ask for a quote **

Silicone Sealants, Polyurethane Adhesive/Sealant, Neoprene and acrylic sealants are all available in varying colours and pack sizes. ** Ask for a quote **

Both one and two part systems are manufactured for a variety of applications. Solvent free latex adhesives are also part of this product range. See our Eco-range for full details. ** Ask for a quote **

Alpha manufactures a very wide range of one and two part solvent based adhesives that can be applied by brush, spray system, roller or spreader. Product bases include Neoprene, Polyurethane, Nitrile, SBR & Natural Rubber. Many products offer resistance to wide temperature ranges as well as giving high bond strengths and varying open times. A number of products such as S889, S5001, SN1314, S708, DP2205 are also MOD approved. ** Ask for a quote **

Alpha Thixofix Contact Adhesive has been developed for the specific aim of making simple the bonding of laminated plastics to wood and other substrates, whilst maintaining the well proven efficiency of ordinary contact adhesives. ** Ask for a quote **

DELO-DUALBOND adhesives are one part solvent-free adhesives suitable for bonding, sealing and potting applications. They have good resistance to thermal shock, and some products are optically clear for large-area bonding, especially suitable for display assembly. They use a combination of light (UV or VIS) and either heat or humidity to achieve full cure. They are used in applications that require a very quick initial handling strength, with full cure being achieved off-line or in a subsequent process where cycle time is not so critical (e.g. in-line reflow ovens). Existing applications include electronic assembly, compact camera modules, RFID and smart labels, and general applications requiring short cycle times. ** Click for more **

DELO-PHOTOBOND UV cured and light curing adhesive are one-part adhesives that cure at room temperature, with visible light (400-550nm) or UV light (320-400nm). Featuring a UV curable acrylate base, they are stress equalising and highly flexible, with up to 300% elongation at tear. They are ideal for UV glass bonding or sealing applications, as they are fast curing and optically clear once cured (product dependant). Other typical applications include bonding, sealing and coating of plastic and metals. Curing through translucent plastics and deep layers is also possible with DELO-PHOTOBOND, since visible light is not filtered like UVA. Full cure is achieved in seconds. Viscosities range from 100 to 30,000mPa.s. Some materials have USP VI approval, for use on medical devices. ** Click for more **

Hexcel manufactures a wide range of film adhesives, foaming films, primers and liquid shims for metal-to-metal and composite bonding. Redux® and HexBond™ Film Adhesives, Foaming Films, Primers and Liquid Shims Hexcel formulates and manufactures a comprehensive range of structural film adhesives, foaming adhesive films, paste adhesives, liquid shims and primers for aerospace and industrial markets. Redux® and HexBond™ Film Adhesives Epoxy and bismaleimide (BMI) adhesives are supplied in film form on a roll and require heat and pressure to cure. These high performance structural adhesives are ideal for metal to metal and composite bonding and for the manufacture of honeycomb sandwich structures. ** Click for more **