Steel - Import export

Health and safety is of paramount importance to all industries. Our introduction of edge rounding and dressing eliminates the sharp edge, known as a burr that occurs during the production of steel strip and coil. Our updated edge dressing machines are capable of producing both large and small quantities of stainless steel strip and coil with a kinder safer rounded edge or full round edge. We can edge dress on site to a maximum width of 150mm. Certificates of conformity, showing the exact chemical composition of the material are supplied with each delivery. We provide: Bevelled Edge - Used for spiral wound gasket production, with 90º angles. Sak - Fully Rounded Edge - Many clients require material to have a fully rounded edge (SAK). GK - Slit edge Standard material with a maximum burr 5% of the material thickness. WAK - Flat rolled edge - Many clients require material to have a deburred edge (WAK).

Stainless Band’s in-house slitting line offers the capability for slitting up to 1250mm wide coil x 0.20 - 1.50mm thickness in 304/316L/321 and 430/409. Other grades are available on request. Also offering material as PE or PVC coated/with foil. Coil sizes range from 200kgs to 3500kgs depending on final widths. This unique line means Stainless Band can handle coils up to 8.5 tonnes on-site made from stainless steel AISI 304/316. This will reduce pricing and also improve delivery times to clients for wide coil and also standard products that Stainless Band provide. They offer good formability, corrosion resistance, toughness and good mechanical properties. As a result they are widely used for insulation and engineering applications. These grades are non-magnetic in the annealed condition. The density of our wide coil is 8.03kg/cm3-0.29 Ibs/in3. The modus of elasticity is 200 Gpa.

At Stainless Band we have the capacity to polish material in coil form or blanks in various grades including AISI 304-S15- 1.4301 EN 10088-2/ASTM A240. We can offer the following finishes from 120 to 320 Grit as well as standard 2B or BA finished. Material can be made into blanks with lengths from 100mm to 3000mm long. Standard thicknesses 0.10ms from m - 4.00. and widths from 2.50mm to 1500mm maximum. Our standard tolerance is EN ISO 9445:2006 but others are available. We can provide coating films, PE and PVC surface protection. Finishes can range from smooth and slightly reflective through course, medium, fine and bright and reflective.

Stainless Band has in house rolling facilities to produce temper rolled strip in various hardness or tensile to suit client requirements. Stainless Band Ltd has in-house rolling facilities to flatten and produce temper rolled stainless steel strip to suit client requirements. These are available in various hardness or tensiles to reduce cross camber or “D” Section. For higher tensile over 1000n/mm2 (330vpn) we can supply precision mill material. Our production capacity for stainless band temper rolled strip is 0.10mm up to 2.0mm with a hardness range of 0.1mm up to 2.0mm with VPN ranges TR 230, TR 280, TR330, TR380 and TR430 and tensile ranges of 800+ 1000+ 1200+ 1500+ and 1900+ n/mm2. Stock grades are 430, 301, 304 and 316. Our production capacity for stainless band flattening provides a gauge range: 1.00mm up to 3.0mm, with a width range: from 10mm to 110mm, stock grades: 430, 301, 304 and 316.

At Stainless Band we pride ourselves on supplying a wide range of steel strapping and boxed banding for delivery to the USA/Canada. Standard materials 0.015“ and 0.020“ thickness, other sizes can be produced to suit order requirements. Grade 304 and 316. Full Round Edges (100% safe edges). We can provide, boxed banding, oscillated banding, pancake coil and aluminium box banding as well as wing seals/closed seals in stainless steel and aluminium.

Stainless Band has in house rolling facilities to produce temper rolled strip in various hardness or tensile to suit client requirements. Stainless Band Ltd has in-house rolling facilities to flatten and produce temper rolled stainless steel strip to suit client requirements. These are available in various hardness or tensiles to reduce cross camber or “D” Section. For higher tensile over 1000n/mm2 (330vpn) we can supply precision mill material. Our production capacity for stainless band temper rolled strip is 0.10mm up to 2.0mm with a hardness range of 0.1mm up to 2.0mm with VPN ranges TR 230, TR 280, TR330, TR380 and TR430 and tensile ranges of 800+ 1000+ 1200+ 1500+ and 1900+ n/mm2. Stock grades are 430, 301, 304 and 316. Our production capacity for stainless band flattening provides a gauge range: 1.00mm up to 3.0mm, with a width range: from 10mm to 110mm, stock grades: 430, 301, 304 and 316

- Pulsation resistant, liquid filled stainless steel case - Glycerin filled standard (dry case available) - Brass internals - Restricted orifice standard - Crimp-On stainless steel bezel - Dual scale (psi/bar) - Optional back flange - ASME B40.1 compliant - 5 year warranty

VERSOTHERM- STORAGE CALORIFIERS The Versol range of storage calorifiers- VERSOTHERM offers an ideal solution when a volume of domestic hot water is required. Water is heated indirectly by a primary medium via an immersion heating battery and stored in the tank. Based on the heating Capacity design, VERSOTHERM is available in 2 Range VERSOTHERM-STI (Standard Storage Calorifiers with HEX or Electric Heater) VERSOTHERM- INS (Instantaneous Heating Calorifiers) VERSOL manufacture calorifiers using the following standard materials: Copper-Lined Steel Stainless Steel Lined Steel Stainless Steel 316L Stainless Steel 304L Glass Lined/Enamel Lined Steel

LSJ Engineering designs and provides structural steel for commercial buildings across Essex, London, the South East of England and beyond. We survey, design and advise on all aspects of access requirements. We help satisfy building and fire regulations to ensure full compliance. Our work is CE certifiable. Browse our previous structural steel projects on our website and get in touch if you have a project we can help with!

SFC (Europe) Ltd are pleased to announce that we have been successful in achieving the prestigious manufacturing accreditation of M630 D60/D60L. Approved to manufacture and supply studbolts, headed products and nuts in both imperial and metric sizes from ½” to 2 ½” diameter in Super Duplex UNS S32760. If you would like a quote or more information on our approval, please get in touch with our sales team or visit our website.

DSM can create almost Stainless Steel Bar Sinks to almost any specification. this means that you can be sure that you're getting a product that fits your space perfectly! We even give a 25-year guarantee with each and every product that we create.

We've been creating worktops for years and with all of that experience comes the ability to develop our processes ensuring that you're getting the perfect product.