Pharmaceutical%20industry%20-%20machinery%20and%20equipment - Import export

Vibratory batch sieving machines to remove contamination from small batches of products, improving product quality and reducing downtime. For more details, please send us a message or click on the website link.

Vibratory sifters for high containment applications such as pharmaceutical powders to improve product quality and safeguard operators health and safety. For more details, please send us a message or click on the website link.

Ductwork Design & Installation - Onsite Ductwork Fabrication A Fume Cupboard Extraction System. should be designed, installed to run efficiently, safely and with the minimum of noise levels. To achieve these requirements all our extract and duct work systems are designed, installed, and commissioned to meet the requirements of H.V.A.C. DW154 (Plastic duct work specification), and B.S. E.N. 14175. Extract systems to serve educational style fume cupboards will meet standards set out in Building Bulletin 88 or B.S. E.N. 14175. At the fume cupboard company, we try and hot air weld as much of the ductwork as possible this prevents leakage and sustains the integrity of the joints for the duration of its life. We provide a variety of different duct materials these consist of: Chemically resistant P.V.C | Polypropylene | Galvanized Metal. For extra protection we can also make glass reinforced plastic (GRP) and fire retardant coating for this duct work.

Educational & Commercial - Fume Extraction Systems Our COSHH Test engineers are fully qualified to BOHS P601 (Commissioning and Thorough Examination of LEV Systems). We ensure all surveys are carried out in accordance with the COSHH regulations 7 & 9, following Health & Safety guidance (HSG258). The Local Exhaust Ventilation test is designed to determine the efficiency and integrity of an extraction system. It requires the engineer to gain quantitative measurements by using airflow instruments and qualitative assessments with smoke tests and a dust lamp. Engineers analyse these results and use invaluable expertise to identify design flaws, defects and maintenance issues that might affect the performance of an LEV system following completion of LEV Testing. Upon completion of an onsite COSHH Safety test a detailed report is produced that contains the findings of the survey and any comments and recommendations that are relevant, including remedial work required.

The Airflow 8 Cupboard is best suited for Industrial and Commercial situations. These Ducted Fume Cupboards are available in standard widths of 1200mm, 1500mm, 1800mm and 2000mm. Compliant with: Building Bulletin 88 (Rev G9.) Designed and manufactured in accordance with Energy Efficient Design and Operation of Fume Cupboards Guide 320. Meets BREAMM Hea 17 and Ene 11 compliance. Please note a suitable extraction system will be required for the fume cupboard to operate correctly, the extract system should be designed and installed to meet the requirements of D.W. 154 and Building Bulletin 88. The Fume Cupboard Company can offer a full turnkey solution The Airflow 8 Fume Cupboard range include :- Standard Bench Mount Walk-in Double Fronted Double Fronted Walk-in Slim Profile Sides

Ductless Industrial Fume Hoods Purair RX Ductless Balance Enclosures. is a Class I enclosure that meets USP 795 requirements for non-sterile compounding procedures. The Purair RX is designed to protect the user and the environment from hazardous powders and particulates generated on the work surface. That the heart of the Purair product line is innovative ductless technology that creates a safe work environment in a wide variety of applications utilizing balance enclosures, compounding, powder mixing, and powder weighing.

Airflow® Horizontal Laminar Flow Hoods. are a series of high efficiency products designed to protect equipment and other contents of the work zone from particulates, for applications sensitive to such contamination. The series includes Vertical Laminar Flow Fume hood (VLF) and Horizontal Laminar Flow Fume hood (HLF) and is ideally suited for use with non-hazardous contaminants and when flexible access to the equipment in the work zone is desired. At the heart of the Airflow® Laminar Flow Hood product line is the Air Science Multiplex™ ULPA Filtration Technology that creates a clean work environment over a wide range of applications. This unit is not recommended for preparation rooms where the fume cupboards are used for long periods of time as this will degrade the carbon filter faster than expected.

Airflow® Vertical Laminar Flow Hoods. are a series of high efficiency products designed to protect equipment and other contents of the work zone from particulates, for applications sensitive to such contamination. The series includes Vertical Laminar Flow Fume hood (VLF) and Horizontal Laminar Flow Fume hood (HLF) and is ideally suited for use with non-hazardous contaminants and when flexible access to the equipment in the work zone is desired. At the heart of the Airflow® Laminar Flow Hood product line is the Air Science Multiplex™ ULPA Filtration Technology that creates a clean work environment over a wide range of applications. This unit is not recommended for preparation rooms where the fume cupboards are used for long periods of time as this will degrade the carbon filter faster than expected.

Movex™ Extraction arms The Fume Cupboard Company are authorised Movex™ extraction arm installer supplying, installing, and maintaining Movex™ bench and ceiling mounted fume extraction arm systems. Independently sourcing a diverse product range covering all working environments where hazardous dust and fumes form part of the working process. Local extraction is established in direct connection to the working process. This is done to remove the hazardous vapors and substances as closely to the source as possible before they are spread into the room.

Microporous design, sizes from Small to 3XL

Vacuum conveying sieve for air-tight sieving and conveying of fine and dusty materials in one operation to improve production capacity. For more details, please send us a message or click on the website link.

Pneumatic sieving equipment to remove oversize contamination within blowing lines. For more details, please send us a message or click on the website link.

Rocket Synergy 4D is for drying single large volumes of solvent, from a few litres up to approximately 100 litres. The system can also be used for a single batch of up to 5 litres. Rocket Synergy 4D provides fast, safe evaporation for solvents with a boiling point of up to 165°C (DMF) and can easily dry aqueous samples. Automatic evaporation of volumes up to 100 litres Eliminates bumping or foaming Easy vessel manipulation with no glassware to handle Safe, easy product recovery and system cleaning

Frozen state solutions are a critical product stage or end product in a variety of industries, including freeze drying, pharmaceuticals, food storage and biotech. The Lyotherm3 combines electrical and thermal techniques. This unique dual analysis adds a new dimension to the data of this critical stage. Impedance Analysis (Zsinφ) is a fixed frequency dielectric analysis providing an indication of the sample tracks molecular mobility, including events not picked up by thermal methods like DTA or DSC Differential Thermal Analysis (DTA) measures the difference in temperature between a sample and a reference, highlighting exothermic and endothermic events e.g. crystallisation, eutectic melting and glass transitions Combining DTA and Impedance analysis means Lyotherm is more sensitive to changes within the frozen structure than other exclusively thermal techniques.

Kinematics & Controls Corporation’s compact modular powder filling systems have proved to be popular in environments where not only precise material dosing is required, but also in areas where companies seek to make the process more efficient, maximising potential product throughputs. Powder is picked up by vacuum and compacted to a constant density within a cylindrical fill chamber. It is subsequently dispensed by the application of low-level, positive-pressure air. The use of a pre-defined vacuum force, compressing the powder sample to a uniform/ even density is the key to achieving the high level of repeat dose accuracy. Cumbersome, time-consuming, hand-weighing is thus eliminated. A wide range of standard gun sizes and filters with various porosities are offered for use with the variety of powders and container sizes which the customer’s process might demand. A custom, 8-up, Micro-Well kit can also be specified, to streamline the filling of 96-cavity well plates.

The Series 3 HT evaporator range from Genevac represents the ultimate in solvent removal technology. Genevac-014 A Solution for High Throughput Evaporation Genevac HT series evaporators are the ideal solution for parallel evaporation bottlenecks in high throughput and production laboratories having high performance and high sample capacities. The unique design of the multi-layer rotor ensures efficient use of valuable laboratory bench space as well as high performance and high throughput evaporation. This proven design has now been updated with the latest version, the Series 3.

The Emulsiflex range of high pressure homogenisers from Avestin are ideal for a wide range of applications, commonly use d within the pharmaceutical, biotechnology and fine chemicals industries. These include cell lysis, particle size reduction, nanoparticles, emulsions (emulsification), and liposome preparation. Additionally, it offers reliable, consistent processing at adjustable pressures of up to 45,000 psi, Both air-powered and electrically-powered systems are available, and options include filter/extruder attachments, temperature control mechanisms and automatic pressure control. The unique Emulsiflex design ensures that there are no ‘O’-rings or gaskets in the entire path of the product. This means less risk of contamination, easier cleaning and no leakage.

The latest additions to the GFD® range from Powder Systems Limited provide users with a greater choice of configuration including vessel capacity, automation and a price to suit every budget. The GFD® Filter Dryer is an innovative piece of laboratory synthesis equipment, working under vacuum and a maximum pressure of 4 barg (58 psi). The vessel has a heated jacket for efficient drying and a unique removable filtration basket for ease of product collection. Getting the right GFD for your process The GFD range now comes in two product categories with the GFD®Lab and the GFD®Lab PLUS. Both offer the unique features of our Lab Filter Dryer but adaptable to suite your own requirements. Available as the 010 Series (0.3L), 050 Series (2L) and 500 Series (10L)