Varnishing - steels and metals - Import export

Exceptional working characteristics Suitable for the repair of conveyor belts, rubber coatings and linings, as well as for joint seals Two component polyurethane cartridge system Short working and application times Fast, clean and flexible Dry to the touch after 2 minutes Can be ground back and finished after 30 minutes No volatile components Break , impact and abrasion resistant Max. hardness of 60 Shore A Manual application or using a spray system

One space ground-based bike rack, varnished with caps.

One space grounded-based bike rack in red varnished steel with black pvc swivel castor and black pvc caps. Possibility of connection with other bike racks. dimensions: 38.5 x 40 cm h. 30 cm

One space grounded bike rack in red varnished steel with black PVC caps. With bottom bracket and a plastic protection pivot supplied with 2 reductions in order to fit in different diameters. Bike rack must be threaded in the bottom bracket hole of pedals supporting the bike raising the rear wheel for few cm. It can be also use to hold the bike during its maintenance operation in safety practical way.

One space grounded bike rack in black varnished steel with black PVC caps. With bottom bracket and a plastic protection pivot supplied with 2 reductions in order to fit in different diameters. Bike rack must be threaded in the bottom bracket hole of pedals supporting the bike raising the rear wheel for few cm. It can be also use to hold the bike during its maintenance operation in safety practical way

One space grounded bike rack in varnished steel with black PVC caps. It has a demountable structure and screws are included.

One space grounded-based bike rack in red varnished steel with black pvc caps. A beautiful and fascinating design conforming to any type of environment and style. It is easy and practical to use. Single piece, no connection system. dimensions : 38.5 x 40 cm h. 26 cm

One space ground-based bike rack, fixed and varnished with caps. Width: 60 mm

One space varnished grounded-based bike rack with fixed wheels. Upper curve is a patented system designed by ANDRYS Ltd in order to set even the disk brake bikes

One space fixed grounded-based bike rack varnished with caps. Upper curve is a patented system designed by ANDRYS Ltd in order to set even the disk brake bikes

One space ground-based bike rack with swivel wheels in varnished steel.

One space ground-based bike rack with fixed wheels, in varnished steel.

One space grounded-based bike rack with fixed varnished steel wheels and width 60 mm. Upper curve is a patented system designed by ANDRYS Ltd in order to set even the disk brake bikes

One space grounded-based bike rack, made of varnished steel with black PVC caps with width 60 mm. Upper curve is a patented system designed by ANDRYS Ltd in order to set even the disk brake bikes

Our work starts with precise and efficient material cutting using modern machines. Our Laser and plasma cutters are available for sheet metal processing of all grades. Laser Trumpf 4kW with interchangeable table 4000x2000mm cuts mild steel of max. 18mm with both oxygen or nitrogen. Plasma Omnicut/Hypertherm where portal is also fitted with an acetylene burner; table size 6500 x 2000mm, usually cuts max. thickness 100mm

large aluminium milling operations

Turned parts Long turned partes, small turned parts Turned, milled and grinded parts Thread inserts in brass, steel and stainless steel Possible materials: Alloy AlCuMgPb, AlZn5,5MgCu etc. Brass CuZn39Pb3, CuZn40Pb2 etc. Stainless steel 1.4301, 1.4305, 1.4571, 1.4401, 1.4101 etc. Steel Machining steel, St52, St37, C45, etc. Special steels Titan, Hastelloy, Copper, Bronze etc. Surface treatments may be done as follows: Galvanizing, nickel, brown, hot-dip galvanizing, phosphating, anodizing, chrome plating, painting, powder coating, plasma coating, sandblasting, Tuflok coatings. All common surfaces as VDA standard are possible (zinc-nickel, zinc flake). Heat treatments such as Plasma / gas nitriding, carbonitriding, hardening, carburizing, vacuum hardening, tempering etc.

The process is CNC laser cutting and bending. The material can be stainless steel or aluminum.

Stainless steel gas springs function the same as their common hydraulic counterparts, but give an alternative when operating under rough conditions such as off-shore and other outdoor exposure applications. Other commons application areas for stainless steel gas spring include health care products, food industry and medical devices.

CNC Turning aluminum part

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Kokeneen tiimin ja nykyaikaisten koneiden ansiosta ESTIMET pystyy käyttämään lähes kaikkia arkkiin liittyvää tehtävää. Valssattujen elementtien reunat ovat taivutetut, mikä poistaa tarpeen käyttää ns. catwalkeilla. Tämä vähentää syntyvän jätteen määrää. Tyytymättömien kiintoaineiden romahtaminen voidaan suorittaa mikrojuoksuilla kierukkamaisen elementin kriittisissä osissa. Roll up -toiminnon jälkeen mikrohiukset poistetaan meiltä.

Bøying av plater på numerisk styrte kantpresser, opptil knekkelinjens lengde (bøyingslenge) 5000mm

Laserskjæring av konstruksjons-, rustfrie, aluminium- og forzinket plater. Maksimal platestørrelse: 4000mm x 2000mm, tykkelse opptil 25mm.