Water evaporation systems - Import export

60 mm Insulation Thickness Inside Body AISI 304 2B Stainless Steel Outside Body AISI 304 SB Stainless Steel Inside Depth: 65 Cm (GN 2/1 Capacity) 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Control Panel Automatic Water Evaporation System Electrical Automatic Defrost Stainless Steel Legs Adjustable For Height Automatic Lighting Inside When Door is Open Special Door and Hinge Systems Removable and Easy Cleaning Magnetic Gaskets Cooling Gas CFC Free: R 134 A / R 404 A Ambient Temperature: + 43oC & % 65 Humidity

You may not have a drainage point for the water generated during the cooling cycle. It is possible to vaporize and eliminate the condensed water with the DWE Series Drain Water Evaporators. Multiple cooling systems operating in the same location can be connected to a single DWE unit, thus, providing you with a compact and low- cost solution.

Neotec UV developed open channel low-pressure, high-output ultraviolet (UV) disinfection system equipped with cleaning device operated by submersible rodless cylinder (NOL-HA Series) in 2005 and obtained Excellent Performance Certification from Korean government agency in 2009. Since then, Neotec has installed UV system at many wastewater and reclaimed waste- water treatment plants in Korea.

Because of the thermal sensitiveness of products, this separation method is applicable. The sample to be distilled is exposed only for a very short time to the heating substances because the film, created by the wiper, can evaporate very quickly. The residence time of medium on the heating surface is a matter of seconds, thus essentially less than in a reboiler flask, circulating evaporator etc. The evaporated product (operation pressures down to 103 mbar and temperatures up to about 300°C) has to pass a “short path” to the condenser only, which is located in the middle of the evaporator. Evaporators in borosilicate glass 3.3 are available with heat exchange areas 0.02…0.8 m². Evaporators in stainless steel can be heated by a heating jacket to higher temperatures with more heat transfer area for higher throughputs.

Because of the thermal sensitiveness of products, this separation method is applicable. The medium which is to be distilled is exposed only for a very short time to the heating substances because the film, which is created by the wiper, can evaporate very quickly. The residence time of medium on the heating surface is a matter of seconds, thus essentially less than in a reboiler flask, circulating evaporator etc. Evaporators in borosilicate glass 3.3 are available with heat exchange areas 0.02…0.8 m². Alternative design versions in stainless steel for higher throughputs are available upon request. Please equire.

the water systems's water output 10L/h,20L/h,40L/h,60L/h are available. Features: 1.two way online water quality sensor,RO water, deionized water, or ultrapure water respectively. 2.Cartridges replacing alarm function, based on time and water quality, show cartridges´ used and residual life. 3.Multiple alarm function: no feed water, full water, water quality´s standard exceeding, and cartridge life ending. 4.top polishing resin, ensure ultrapure water´s quality up to 18.2 MΩ.cm, with the lowest TOC level. 5.integrated design of the whole machine, small occupancy, simple appearance, easy to use and safe. Lab Type 1 ultrapure water can be widely used for Flow cytometry, pyrogen sensitive applications, cell and tissue culture, and sentitive analytical work such as HPLC,ICP-MS,GC-MS. TheType 3 RO pure water is for filling water baths and incubators,feeding glassware washing machines and autoclaves.