Control - Import export

The Focovision by Transmission SPF-3 is used in optical laboratories where the lenses are mounted into frames. It is connected to the computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, and easy calibration. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it is equipped with a frame positioning device and has a user friendly interface; permitting an operator to learn how to perform the complete lens control of the mounted lenses with little training required. Positioning assistance: The FOCOVISION display provides assistance to the operator to help them position the frame and lens to be measured properly, creating a user friendly and fast process. The positioning target, displayed at every step of the procedure, and operator instructions projected

The Focovision by Transmission SPV-3 is used in prescription laboratories. It is connected to your computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, easy calibration, and especially its visualization system of the semivisible marks or the upper segment line corner of the addition. This system permits an accurate positioning on the different control points without any lens marking. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it has a user friendly interface permitting an operator to learn how to perform the complete lens control (far view, prism reference point, near view, thickness, shape, etc.) with little training required. Minimal training required Very high measurement speed Flexibility (configurable procedures, easy to adapt, any toleran

The Dual LensMapper, integrated in this unit, gives a mapping of the prescription lens (freeform or conventional) and calculates FOA optical power at the reference points (FV, NV). For the freeforms, it compares the expected design to the real lens and displays an error map. A Go/NoGo decision is made, based on the error map and the list of criteria defined by the lab. Because the A&R AutoMapper is task specific, and the system has a small footprint, you can easily integrate it into the lab, either directly after the surfacing or in the final control (also suitable for checking the cut lenses). The AutoMapper is an excellent investment for a modern lab with a rapid payback! 100 % production control just after surfacing --> direct feedback on production* control of the cut lens - in case of remote edging Non contact measurement Correction of eventual R/L inversion Integrated Dual LensMapper : measurement of free form and conventional progressive lenses Control of power, cyl.

The ProMapper is the A&R table-top solution to provide state-of-the-art optical inspection according to the industry standards (ISO/ANSI), totally independent from the operator. In addition, it supplies freeform surface evaluation based on the A&R Error Map technology, making sure that no surface defect is shipped to the customer. Based on the Error Map, surface quality features like the GMC (Global Mapping Criteria) are evaluated and constitute extremely relevant inspection data for process control applications (Statistical Process Control).

We are happy to support you by taking on tasks related to the control and coordination of e.g.: Cross-divisional project management Cross-plant project coordination supplier control Vorseriensteuerung Prototypes and test construction Series start-up control component coordination parts management

Charge controller 28V for FERRUM wheel loader . 24-volt systems must be supplied with 28-volt charging voltage to remain intact. This is the version for the alternator with hydraulic brake booster based on vacuum. Advantages over the compressor system are: no noise when the excess pressure is released no condensation when the air is compressed, no possible freezing in winter therefore no need for an air drying cartridge

The intrinsic quality of the various components, sub-assemblies and software is checked at each stage of design and manufacturing. During the pre-validation phases, performance, durability, and efficiency goals are meticulously assessed and cross-checked with the obligations defined in the specifications. These efficiency targets are cross-referenced and verified with our customer upon commissioning of the equipment, following the implementation of a duly developed validation protocol.

Our metal work unit is equipped with all the equipment required to carry out the majority of operations related to the production and shaping of metal objects: mortising machine, press, drilling machines, rolling machines, semi-automatic welding stations and TIG/Plasma/Oxycutting workstations. Our vast range of metal work equipment and the adaptability of the workshop’s covered areas are ideal for performing almost every type of shaping.

As part of our maintenance and repair services, our teams can manage the technical upgrading and renewal of your existing pneumatic and hydraulic controls.

A major challenge when designing special machinery, the quality of design and integration of hydraulic and pneumatic controls is key for proper operation, reliability and maintenance purposes. Fully aware of these issues, we take the greatest possible care and apply our wealth of experience to design and integrate pneumatic and hydraulic control solutions that are both efficient and reliable. The components used are all selected from the most widely used, tried-and-tested solutions available from leading manufacturers. At your request, we will install the materials recommended by your technical services.

Alarge range of Schlegel high precision control knobs for industries, electronics, etc... The ASI Control concept Control Units for AS-Interface Battery-free Wireless Pushbutton DUX-Basic DUX Limit Switches EK Series KOMBITAST-R Minibox for profile rail systems or wall-mounting OKTRON-JUWEL OKTRON-R QUARTEX-R QUARTEX-R-JUWEL QUARTRON QUARTRON-JUWEL RONDEX RONDEX-M RONTRON-Exclusive RONTRON-Q-JUWEL RONTRON-RJ-Stainless Steel RONTRON-R-JUWEL USB Jack / Protective Lids RVA series - stainless steel RX-JUWEL

Large range of switches, button and connectors Arcolectric: anti-vandal switches. Download .pdf frig switches and lampholders. Download .pdf rotary switches. Download .pdf push button switches. Download .pdf lever switches. Download .pdf pilot lamps. Download .pdf fuseholders. Download .pdf IEC mains connectors. Download .pdf rocker switch. Download .pdf microswitches. Download .pdf lever switches (2012). Download .pdf high inrush switches.

Boutons en plastique injecté Ritel. Particulièrement adaptés pour les secteurs de l’électricité, les appareils de laboratoire, les accessoires, l’industrie aéronautique, table de mixage et le médical. Tous les produits Ritel sont conformes à la directive RoHS. Les boutons Ritel se caractérisent par leur présentation soignée, leur grande solidarité, l’excellent maintien sur l’axe par fixation à pince de serrage et par un programme complet d’accessoires de couleurs variées. Les boutons Ritel sont équipés de princes de serrage à ressort ! Il n’est nécessaire de desserrer aucune vis avant le montage, simplement enfoncer et serrer. Tout les modèles de boutons Ritel sont livrables en quatre couleurs. Les capuchons et les disques à flèche existent en trois couleurs supplémentaires. Tous nos boutons et accessoires sont aussi à disposition en couleurs spéciales. Les capuchons sont livrables en trois exécutions de base : modèle plat, forme prismatique à et forme courbée. Les boutons ont un...

- Simple automation directly using the control system without software and/or PC - Operation with limit switch or via power consumption - Left/right operation and speed control directly on the housing - Option for external switches/joysticks - Various modes of operation, such as tip operation and start to finish (semi-automatic) - Various adjustable acceleration ramps - Power supply via 24V/2.5A

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

dryve motor control system - select, click, control... Travel distances, positions, speeds, operating times - easily defined with the new igus® web-based control system for drylin® E linear systems. - No software or app installation necessary, fast commissioning - Control possible via smartphone (browser), tablet or laptop - Simple and intuitive user interface, control system set up in just a few minutes - Compatible with numerous industrial controllers (e.g. Siemens S7/Beckhoff) - For DC, EC and stepper motors - Cost-effective

Pressure gauges for maintenance units, pressure regulators and control panel installation, Fastening elements, linking accessories and brackets, containers, drainage valves, control magnets, Spare parts for compressed air treatment equipment

control panels, control cabinets, pneumatic systems, pneumatic systems, control units, pre-assembled pneumatic modules for machines and plants in automation technology factory automation assembly lines test benches Also for automotive applications such as brake test benches, assembly robots, conveyor belts. Design, layout, assembly, plug and play delivery. We are also happy to use components according to the parts list, specifications or customer specifications.

Outer body steel. Mounting bush plastic. Version: Steel electro zinc-plated. Note: Rotation dampers are maintenance-free, ready-to-install elements for the controlled braking and damping of rotational or linear movements. These rotation dampers enable the smooth opening and closing of small covers, compartments and drawers. They protect sensitive components and can also raise the quality and value of products. The rotation dampers brake right or left rotations or in both directions. One cycle rate corresponds to one 360° right rotation and one 360° left rotation. Attention: The rotation damper bush should not be used as a support, but rather as an external guide or bearing.

2-phase high-torque stepper motor in NEMA 17, NEMA 23 and NEMA 34 sizes with flat-milled shaft (D-shaft). 1.8ׄ° increment angle (full increment) with integrated positioning control. Note: Stepper motor with integrated positioning control. It forms a convenient unit consisting of stepper motor and intelligent controller. Reference travel is possible on a block with reduced electric current without proximity switch. Integrated rotational monitoring. Smooth running through dynamic switching of increment trip. Actuation via single I/O interface, 31 position configurations and call-ups. Control unit can be parametrised quickly and conveniently with the software. The software and manual for programming the positioning control are available as free download. When selecting a suitable motor, using just the retaining torque is not enough, as the motor’s torque decreases with the speed. It is therefore essential to select the correct motor according to the torque curve.

Weather-resistant Outdoor Soundproofing Mats - Reduce Noise by 20dB (as per the sound reduction index) Enhance outdoor environments with our weather-resistant soundproofing mats in deep forest green. These 3.55m x 2.05m mats offer outstanding noise reduction of 20 dB, ensuring a quieter atmosphere. Ideal for construction sites, events, and outdoor spaces. Invest in quality for a peaceful working or event area. Key Features: Weather-resistant Soundproofing Mats for Construction Fences with 20dB Noise Reduction Enjoy the benefits of our exceptionally robust yet flexible soundproofing mats designed for construction fences: 1) Outstanding Sound Insulation 2) Robust Weather and UV Resistance 3) Lightweight and Easy Installation 4) High-Quality Materials 5) Versatile Applications: Suitable not only for construction site fences, but also for events, festivals, or other outdoor gatherings.

Regardless of whether gas engine, compressor and turbine oils, standard hydraulic oil, bed track oil or synthetic high-performance grease: with our wide range of products, we offer the right product for every application. Our specialists are on hand to provide you with help and advice and to inform you about. They will also advise you on industry-specific solutions, such as products for the paper industry or special lubricants that are required for machines within the scope of manufacturer approvals. Our aim is to work out a sensible and efficient solution for your needs.

Injection control for FERRUM wheel loaders . Will be delivered like shown. When starting up the engine for the first time and after running on empty, you can use the hand pump to help vent the fuel line, filter and injection system.

With this fun Stress Controller (Fidget Pad) you will never be finished! Wobble, click, press or scroll. You can fully enjoy yourself. It is a successor to the well-known fidget cube. Also check out our other friemelgadgets such as the simple dimpl. Fidgets activate the brain It is known that fidgeting can help activate and regulate the brain. That is, if you like to move and fidget, you most likely do this to get your brain into the right action mode. Fidget toys (also called friemelproducten in Dutch) help with this. Features Fidget pad Age: from 3 years Material: plastic Content: 1 stress controller, supplied with a cord so you don’t lose it so quickly. Please note! This gadget is available in different colors and comes assorted.

The Flowlink Flow-Connect is an easy to use flow controller. It can be used to control almost any pump-flowmeter combination. Besides pump control it also has the ability to register additional sensor signals, like pressure of temperature. The standard Flow-Connect is suitable for connecting 1 pump, 1 flowmeter and 1 additional sensor. More complex flow-control is available on request. The Flow-Connect has 4 standard flow control functions. Pump Controller – 0 – 100% pump Flow Controller – flowmeter controlled flow Batch Controller – batch dosing Additional Sensor Controller – eq. pressure or temperature control The Flow-Connect can accept different control signals, like 0-10Volt, 4-20mA, Pulse and Modbus.

A wide variaty of control units, from Vestas CT unites to Mita-Teknik controllers and specific Dan control parts for Neg Micon and many other controls for Nordex, Vestas and other wind turbine brands.

The freefall metal detection system Vistus ensures the reliable inspection and removal of metallic foreign bodies from any kind of food products in powder or granule form that is transported with the use of gravity through a pipe, e.g. milk powder, wheat, nuts or cornflakes. - Minimum installation height for easy integration into any application - Cost effective control of up to four search coils via one terminal - True In-Process Validation. This functionality guarantees correct performance testing