Gate valve - Import export

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Do not hesitate to contact us for your requests for industrial, HVAC and water valves and pipes... www.stracau.com s.creiche@stracau.com +33.6.76.18.78.74 (Whatsapp)

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#gate

Flanged PN16 (8” Available Flanged PN10), Cast Iron Body, Cast Brass Seat, Stainless Steel Stem, Inside Screw, Non-rising Stem, Conforms to DIN 3202 F4, Rated PN16, Temperature -10°C to 120°C.

The company supplies a broad range of valves that are available in a wide variety of materials from today’s leading valve manufacturers to fully meet even the most complex and unique requirements, we source and provide global quality, total reliability valves for our customer worldwide. All our manufactures and associated suppliers are selected according to standards of reliability.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body Stainless steel 1.4408. Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4401 (316) Stem Stainless steel 1.4404 (316) Function Electric acting Pressure discharge One-sided Voltage 400V 3AC (24V DC, 230V AC on request) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Function Electrical operated Pressure discharge bidirectional Stem Not rising Pressure range Please refer to the data sheet Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy-coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Electric acting Pressure discharge One-sided Voltage 400V 3AC (24V DC, 230V AC on request) Pressure range Please refer to the table Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Refer to the advices on page 8! Body Stainless steel 1.4408 Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4401 (316) Stem Stainless steel 1.4404 (316) Function Pneumatic single acting with spring return, normally closed (NC). Pressure discharge One-sided Pilot pressure 6bar Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the table Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 Installation Only with vertical upwards actuator The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Hand wheel Steel, lacquered Pressure discharge One-sided, two-sided on request Stem Not rising Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Hand wheel Steel, lacquered Pressure discharge bidirectional Stem Not rising Pressure range Please refer to the data sheet Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body Stainless steel 1.4408. Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4401 (316) Stem Stainless steel 1.4404 (316) Hand wheel Steel, lacquered Pressure discharge One-sided Stem Not rising Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Lever Steel, lacquered Pressure discharge One-sided Stem Not rising Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body Stainless steel 1.4408 Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4401 (316) Stem Stainless steel 1.4404 (316) Lever Steel, lacquered Pressure discharge One-sided Stem Not rising Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Pneumatic double acting Pressure discharge One-sided Pilot pressure 6bar (lower pressure on request) Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid