Hot-rolled - Import export

DD11 - DD13, pickled - greased, EN 10029 S235JRG2, pickled - greased, EN 10025 S355MC, pickled - greased corrugated plates, S235 JRG2 bulb plates, S235 JRG2

S235 JRG2 S355 J2G3 sheet plates S355MC

EN 10025 1-2-5 Non Alloyed Steel Products for Structural uses S 185 JR, S 185 JO, S 185J2, S 185 K2, S 235JR, S235JO, S235J2, S 235K2, S 275JR, S 275JO, S 275J2, S 275K2, S 355JR, S 355JO, S 355J2, S 355K2, S 355JOW, S 355JOWP EN 10149 1-2-3 / SEW 092 Hot Rolled Steel Products with a High Yield Quality for Cold Forming S315MC, S 355MC, QSTE380TM, S 420MC, S 460MC, S 500MC, S 550MC, S 600MC, S 700MC, S 260NC, S 315NC, S 355NC, S 420NC EN 10111 Hot Rolled Steel Products with a Low Carbon Content for Cold Forming DD11, DD12, DD13, DD14 Non Alloyed Steel Products with Surface in Relief (tear-drop and chequered pattern sheets)

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 60 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 50 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 40 mm

Flatbars, hot rolled, heat treated, pickled, Tol. acc. DIN EN 10058, grade 1.4057 50/8 mm

Flatbars, hot rolled, heat treated, pickled, Tol. acc. DIN EN 10058, grade 1.4057 40/30 mm

Flatbars, hot rolled, heat treated, pickled, Tol. acc. DIN EN 10058, grade 1.4057 40/20 mm

Flatbars, hot rolled, heat treated, pickled, Tol. acc. DIN EN 10058, grade 1.4057 30/20 mm

Bar round, hot rolled or forged, tempered, peeled or turned, Tol. acc. DIN EN 10060 or DIN 7527 Page 6, grade 1.4006 QT650, 45 mm

Bar round, hot rolled or forged, tempered, peeled or turned, Tol. acc. DIN EN 10060 or DIN 7527 Page 6, grade 1.4006 QT650, 40 mm

Bar round, hot rolled or forged, tempered, peeled or turned, Tol. acc. DIN EN 10060 or DIN 7527 Page 6, grade 1.4006 QT650, 35 mm

Bar round, hot rolled or forged, tempered, peeled or turned, Tol. acc. DIN EN 10060 or DIN 7527 Page 6, grade 1.4006 QT650, 30 mm

Bar round, hot rolled or forged, tempered, peeled or turned, Tol. acc. DIN EN 10060 or DIN 7527 Page 6, grade 1.4006, 100 mm

Flatbars, hot rolled, heat treated, pickled, Tol. acc. DIN EN 10058, grade 1.4057 50/10 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 90 mm

We can supply pipes for the construction of pipelines, equipment and tanks subject to low temperatures as Seamless or welded pipes, hot rolled or cold finished. Pipe norms suitable for low temperatures are according to; ASTM A 333 / ASME SA 333 (seamless and welded pipes) EN 10216-4 (Seamless pipes) EN 10217-4 (Welded pipes)

We supply the pipes that are suitable for bending and are used for the constructions of plants and equipment subject to high temperatures and pressures. The seamless pipes, hot rolled or cold drawn/cold finished with heat treatment. The ASTM A335/ASME SA335 and EN 10216-2 norms require heat treatment also for the hot rolled pipes. The welded pipes are manufactured according to EN 10217-2. Supply of pipes suitable for high temperatures are according to; ASTM A 106 / ASME SA 106 (Seamless pipes) ASTM A 335 / ASME SA 335 (Seamless pipes) EN 10216-2 (Seamless pipes) EN 10217-2 (Welded pipes)

We supply the following I beams in various dimensions and qualities acc. to DIN 1025-2 IPB (HEB) 100-1000 IPB I (HEA) 100-1100 IPBV (HEM) 100-1100 IPB IL (HEA A) 100-1100 DIN 1025-2: Hot rolled I-beams - Part 2: Wide flange I-beams, IPB-serie; dimensions, masses, sectional properties EN 10163-3: Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 3: Sections CHANNELS ( UNP /UPE) Sizes ; UPE 80-400 UNP 50-400 We supply the following channels in various dimensions and qualities with surface condition: according to EN 10163-3: 2004, class C, subclass 1

Cold-rolled (2B/IIIc) and hot-rolled (1D/IIa) in the following versions: • foil-coated • ground • brushed • bright annealed (2R/IIId) in den formats: • small format 1.000 x 2.000 mm • medium format 1.250 x 2.500 mm • large format 1.500 x 3.000 mm • as well as custom dimensions upon request Stainless steel pipes and steel bars upon request

Flat steel products in roll or sheet forms obtained by cold-rolling of hot-rolled flat steel, with thicknesses ranging from 0.20 to 2.00 mm. meeting the expectations concerning the surface flatness and the width and thickness variation and the physical properties of the produced materials fully remain homogenous. Common Grades; As per EN 10130 DC01/DC03/DC04 , ASTM A619/DQ, SAE 1010 /1008/1006

Applications Pipes for the construction of pipelines for water, liquid hydrocarbons, natural gas and for the construstion of chemical and industrial plants, refineries etc. Norms Line pipes are according to the following norms: API 5L (ISO3183) (seamless and welded pipes) ASTM A53 / ASME SA53 (seamless and welded pipes) Manufacturing methods Seamless pipes, hot rolled or cold finished with following heat treatment: ERW pipes up to dia 24" and SAW pipes for the other sizes.

The round SEAMLESS tubes are hot rolled and satisfy both the requirements of the norm EN 10210 for structural applications and EN 10297-1 for mechanical applications. These steel tubes are fully killed and are suitable for structural applications but with the possibility to reach up to 100 mm w.t., which is impossible for welded tubes. These tubes are used for the manufacture of various kinds of construction components, above all where heavy wall thickness are required. EN 10210-1/2 (structural applications) EN 10297-1 (mechanical applications)

We supply patterned plates (tear drop and diamond patterns ) that are produced for creating a non-slip metal surface that are used at fire-escape stairs, walking lines, ramps, machinery, wet floors of ship and shore side premises or vehicle, trucks and lorry’s haulage, stairs, doors of cupboard, and covering of outer facade or floor. Production from 1,50 mm to 16,00 mm thickness from 1000 mm to 1500 mm width is the most common requirements and supply. Expanded Steel Sheets that are from the expansion of hot steel rolls, generally are preferred for places where the weight of the patterned sheets have to be minimized. By their lightweight characteristics, generally are used in ship building industry, walking lines, door or complete generator boxes, partition walls, ceiling coverings, pipe and cable cover system, truck haulages, fences, platforms and military structures.

We supply from the productions and our stocks ; the galvanized flat steel that is hot-dipping of cold- rolled metal through a zinc bath where both surfaces are coated with layer of zinc applied in order to enhance material lifespan and prevent corrosion which will eventually occur on the material surfaces in the presence of water or air moisture. Hot Dip Galvanized Steel Coils and / or Sheets Cut From Coils, Zero Spangle, Chromated, Unoiled Acc. to EN 10346/EN 10143 Drawing Steel Grades; DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z Structural Steel Grades; S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z.. Coating Thickness from 50 gr/m2 to 300 gr/m2 Thickness from 0,2 to 4 mm. “Please contact with our Sales Department for the current Stock Delivery Options for DX51D+Z275 Sheets/Coils”

- Wide range of steel grades: structural, cold forming, HSLA, etc. - In coils or cut-to-length - Standard os curtomized sizes

Dimensions Thickness: 5 mm up to 150 mm Width: 1000 mm up to 3050 mm Tolerances: EN10029, ASTM A6, ASTM A20, ASME SA6, ASME SA20, DIN 1543, JUS. C. B4. 110 UT Tests: EN 10160:1999 Z quality requirements: EN 10164:1993 Weight and terms of supply: Maximum plate weight is 8 tons 9,5 tons can be produced upon request Flame cutting between 40 to 150 mm thickness Surface conditions: rolled, sandblasted and primer coated High tensile strength plates according to DIN standards can be produced with hardness at - 50 degrees and yield strength at high temperatures, whichever is preferred in other standards.

Coloricio offers a wide range of flat and rolled products that prevents steel rust and corrosion through excellent surface finish related to zinc coating: cold-rolled steel/aluminum hot rolled (pickled and oiled) steel/aluminum hot dip galvanized steel/aluminum