TROTEC GMBH

TWP 11025 E – Trotec's powerful submerged waste water pump accomplishes virtually any task with flying colours. Making use of 1,100 watts the pump reliably pumps up to 15,000 litres per hour of clean or contaminated water containing dirt particles sized up to 25 millimetres from a delivery head of up to 11 metres. Hence, it is equally suitable for use in garden ponds, drainage shafts or cisterns as it is for the quick draining of rooms affected by a flood or heavy rainfall. Withdrawing water from lakes, rivers and swimming pools can achieved without difficulty. A water level of 7 metres is reduced to merely 35 mm before you know it The robust and compact submerged pump is accommodated in a watertight encapsulated and impact-resistant plastic housing and therefore optimally prepared for underwater application at an immersion depth of up to 7 metres.

With the powerful 750 W submerged pump TWP 7506 E, even large quantities of water can be transported in a very short time. The powerful high-performance pump with near-ground suction is recommended for universal use in the house, garden and business to pump out or recirculate slightly contaminated clear water (dirt particles sized max. 5 mm) in indoor and outdoor pools, whirlpools, garden wells, rain barrels, cisterns and rainwater retention basins. Moreover, the submerged clear water pressure pump can be used to dry out basements and living spaces flooded by washing machine leaks, heavy rainfall or the ingress of groundwater, leaving "wipe-dry" results and a low residual water level of 5 mm. When used in waterproofing of buildings, the TWP 7506 E pump, which is protected against the ingress of water by IPX8 type of protection, impresses as a low-maintenance and durable drainage pump for pumping accumulated rainwater or groundwater out of the drainage shaft in a controlled way.

OIL HEATER FAN IDE 20Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 20 Hot air in a trice at a low price: The smallest oil heater fan of the IDE series from Trotec comes up trumps if you are looking for a compact and low-priced yet reliable oil heating solution for flexible heating applications. Whether in workshops, warehouses, production zones or on construction sites – with a heating capacity of 20 kW the IDE 20 confidently generates clean and dry hot air in quantities of up to 600 m³/h. Even longer outdoor applications present no obstacle to the oil heater fan IDE 20, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

As wonderful as the summer with its warm temperatures may be, it also has a dark side. If it is permanently too hot, the lovingly tended garden plants will die of thirst and the formerly green lawn will burn in the blazing heat unless it is watered for several hours every day. The submerged waste water pump TWP 7536 E provides a remedy here, for it enables you to pump freely available service water (with dirt particles sized up to 25 mm) from the garden pond, a stream or a rainwater cistern for watering your garden. Conversely, the submerged pump also helps when it rains too much. Continuous rainfall and storms in summer are a frequent cause of flooded streets, water flooding in the garage and cellars full of waste water. Blessed is one who is prepared for such capricious weather conditions. With the robust pump TWP 7536 E, which is protected against the ingress of water by IPX8 type of protection, you can dry out even heavily flooded basements and garages in the shortest possible time

Contaminated water in the house, garden or well should be pumped off as quickly and as effectively as possible – the thoroughly robust and powerful submerged waste water pump TWP 4025 E is perfectly suited for this purpose. It meets every challenge and transports water containing dirt particles sized up to 25 millimetres. The submerged waste water pump TWP 4025 E reliably transports up to 7,500 litres of contaminated water per hour up to a pump height of 5 metres with a power consumption of 400 W. Flooded basements and living spaces are quickly rendered accessible again, and building or waste water pits can be emptied just as effectively as ponds, tanks or cisterns. Thanks to the pump's high conveying capacity, water can be quickly and easily withdrawn from lakes, ponds or rivers for lawn sprinklers or complex irrigation systems. Naturally, the submerged pump TWP 4025 E is also suited for transporting clear water.

Impressive 400 watts of power for pumping up to 7,000 litres per hourThe compact submerged clear water pump TWP 4005 E wows homeowners and passionate amateur gardeners alike with its high capacity and the user-friendly handling characteristics. The maximum feed rate of 7,000 litres per hour recommends the TWP 4005 E as much as the extraordinary pump height of 7.5 metres. An integrated check valve prevents the return flow upon switch-off. With its powerful and maintenance-free 400 W motor the submerged clear water pump TWP 4005 E conveys clear or only slightly contaminated water with particle sizes of up to 5 millimetres. The submerged pump drains flooded basements and laundry facilities at a remarkable speed. It can be used to empty swimming pools in a trice and further leaves a good impression when pumping over the water in cisterns and rain barrels that are full to the brim.

The submerged waste water pump TWP 7025 E is a compact power pack mastering virtually every task brilliantly. With a power consumption of 750 W the high-suction pump transports up to 13,000 litres of contaminated water per hour. Due to this enormous conveying capacity of the TWP 7025 E, flooded basements and living spaces are quickly rendered accessible again, and pumping water out of building and waste water pits as well as withdrawing water from lakes, rivers and ponds can be done easily and without any problems. Even the water volumes of larger ponds or swimming pools can be circulated or disposed of quickly and easily. This power pack pumps water containing dirt particles sized up to 25 millimetres up to a pump height of 9 metres reliably and smoothly. This way it is able to transport water from a flooded basement to the next higher floor and thus out of the house.

Trotec's most powerful submerged clear water pump TWP 9005 E pumps off up to 14,000 litres of clear to slightly contaminated water per hour. This makes it the perfect partner if you suddenly need to pump large amounts of water off or over quickly and efficiently. It is excellently suited for draining water from pools, for the quick elimination of leakages caused by a defective washing machine or of ground water ingress in basement rooms as well as of water that has penetrated the walls owing to a flood or heavy rainfall. Another possible application would be when work is required in drainage shafts. The maximum delivery head of the TWP 9005 E can amount up to 11.5 metres. An integrated check valve prevents the water from flowing back after switch-off and so reduces the time to restart suction. With its high-performance and maintenance-free 900 W motor the TWP 9005 E pumps off even slightly contaminated water with particle sizes of up to 5 millimetres.

Whether you want to reliably keep construction zones warm, effectively heat larger halls, protect your livestock from the cold or keep your work material free of ice despite low temperatures: with 100 kW of direct heating power the IDE 100 D provides a high heating capacity for every demand with 100 % efficiency. The integrated oil burner of this heating device can be fuelled by either diesel or fuel oil. The continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss® injection pump. Safe operation of the oil heater fan is ensured by an electronic flame trap and an integrated overheating protection. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

ELECTRIC HEATER FAN TDS 755-10-15 – solid three stage heating power up to 15 kW A true power pack, the electric heater fan TDS 75 cuts a remarkably fine figure even with large-volume heating tasks. And not by chance, but exclusively made by Trotec. And since our distinctive logo has been printed on the outside, we have also incorporated convincing extras inside, which make all the difference to conventional standard electric heater fans. In addition to common equipment features such as a fan motor provided with thermal protection or a reliable overheating protection, the electric heater fan TDS 75 comes equipped with further practice-oriented features, e.g. an integrated air baffle, which optimally leads the warm air flow outside and initiates maximum efficiency, or trapezoidally mounted carrying handles, on which the electric heater fan can be stably stacked a number of times.