TROTEC GMBH

ELECTRIC HEATER FAN TDS 10Small firebrand with impressive inner values There are many electric heater fans – but only one original Trotec TDS series. Distinctively recognizable by the logo printed on the side, even the smallest electric heater fan of our TDS series presents itself to you in markedly good shape. And not only on the surface. A second glance may well be worthwhile, in every respect, little by little, can add up to a great difference! Only the TDS electric heater fans from Trotec are equipped with two convenient attachment screws mounted to the sides in order to accommodate the optionally available wall and ceiling holders. With the electric heater fan TDS 10, the desired temperature can easily be adjusted via an infinitely variable thermostat, which automatically switches the heating elements on as needed in addition to the permanent fan to save energy.

OIL HEATER FAN IDE 30Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 30 If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation. Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when applying the optionally available flue gas discharge. The firing of the IDE 30 can variably be made with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables an easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.

Because the units carry the label made in Germany you can be sure that you are buying a top-quality, highly efficient and extremely reliable heating unit which will carry on heating in the most hostile of environments and harshest of conditions. Theres also an electronically-controlled multistage switch to regulate air flow and air temperature so that you can carry out blasting, coating and painting work in fact almost any surface work at all - at a constant temperature both indoors and out. Here the low-down on the TEH 200: Heating performance: 40 kW Air flow rate: 3,000 m³/h Input voltage: 400 V Power consumption max.: 61 A Fuse protection / plug: 63 A / CEE 63 A, 5-pin Mobility: wheelable/ fork lift / crane Sound level (distance 3 m): 75 dB (A) Air pressure: 600 Pa Temperature increase ΔT: 60 °C Length: 1,625 mm Width: 800 mm Height: 1,270 mm Weight: 230 kg

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat Connection for external thermostat Chassis for easier movement

HIGH-PERFORMANCE FAN TTV 4500 SCascadable fan for construction and restoration work Whether to speed up construction drying, for dust collection or the ventilation on construction sites, in storage spaces and workshops or the agriculture – the TTV 4500 S is a smart ventilation solution for all users looking for a budget-optimized high-performance fan. The particularly compact device is equipped with many practice-oriented details, making its application both convenient and simple. Its equally robust and lightweight integral housing can be stacked up to five times and comes equipped with hose connectors, carrying handle, cable holder and rubber feet for a secure footing. During operation the adjustable 2-stage axial fan can impress with high pressure and an enormous air flow rate of up to 5,000 m³/h – this corresponds roughly to 1,388 litres of air per second. Therefore, the TTV 4500 S is the ideal fan type for the circulation of high air volumes.

The TTK 122 E allows for easy transport of bar handles and steering wheels on both sides. The operating comfort is not affected adversely by the solid design. Membrane keys that the operating panel is equipped with is easy to clean and the desired air humidity for example, can be a direct input through the digital display. The selection switches with only one less value are energy saving giving an advantage that is practical in comparison to other dehumidifiers that are analog controlled. The TTK 122 E has a display that can show the dominant air temperature during the function of climate control. It works with full automatic performance as an alternative to the TTK 120 E. For accelerated textile drying it disposes a super-dry functionality. When it comes to wet laundry, carpets, or cloth it is especially practical for faster dehumidifying.

Correct ventilation is not only an important prerequisite for a pleasant working environment, work protection provisions and regulatory directives make it mandatory in many areas.Proper room ventilation conducts harmful fumes and substances out of the room. The high pressure centrifugal fan TFV 100 is well-equipped for tasks such as transport of up to 4,000 m³/h air, even over longer distances and with back pressure.Owing to its extreme robustness, it is able to handle harsh working environments efficiently.The TFV 100 is available as standard model and additionally as a hire model. Benefits in practice: Extremely robust models with a high flow rate Splash proof type A (IP55) Deployment also possible in very dusty rooms Fan motor situated away from the main air flow Can be connected to suction as well as distribution ducts Stable characteristic curves and constantly high pressure

CERAMIC FAN HEATER TDS 10 MQuick, effective and draught-free warmth without burning dust The small ceramic fan heater is not only the ideal heating solution for allergy-sufferers to be used in living and work spaces. For, generally speaking, electric heaters are excellently suited for use in closed interior spaces, as they neither consume oxygen nor produce any combustion gases. The ceramic fan heater TDS 10 M still outweighs this commonly known advantage of electric heaters, for it is equipped with a PTC ceramic heating element instead of heating wires. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.

The 44 Kg TTW 25000 S barrel fan with dimension 1,060*525*1,140mm is designed to introduce a cost efficient option for semi-professional use both indoors and out being no less than the similar TTW series that are much more professional and expensive.In places where there is a requirement for high air exchange rates within investment expenditure such as ventilation tasks in production environments, agriculture or storage areas,these barrel fans are quite efficient. The device with a galvanized steel case and a chassis is also equipped with an inclined drum capable of being variably aligned for vertical flow positions,making it easily portable.This enables the direction of air current at high wall or ceiling sections as well. Practical advantages: A cost-saving option for semi-professional ventilation applications Air circulation capacity to 27,600 m³/h Plug-in devices easy to handle

ELECTRICAL SPACE HEATER TDS 75 RProfessional heating for a wide range of applications: With the electric heating gun TDS 75 R Not only because of the round warm air outlet on-site direct heating applications run smoothly with the electrical space heater TDS 75 R. The combination of sound, straightforward heating engineering by means of corrosion-protected stainless steel heating elements for reliable, fault-free continuous heating operation as well as easy handling via infinitely variable thermostat and triply switchable heating capacity control offers you the most diverse applications. a budget-friendly heating solution without corners and edges – housed in a fully galvanized, painted steel housing with ergonomic handle.