WI.TEC -SENSORIK GMBH

The INFRA.sens® was specially developed for high-quality NDIR gas analysis. In the design phase, special emphasis was placed on high stability and a low detection limit. With the use of high-performance light emitting diodes (IR-LED) and thermal micro radiators, which were adapted to the needs of gas measurement technology, these goals were achieved in full. In the spectral range from 2 μm to 12 μm, carbon dioxide, carbon monoxide, hydrocarbons and nitrous oxide can be reliably detected up to the ppm range with this new sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research

The INFRA.sens® was specially developed for high-quality NDIR gas analysis. In the design phase, special emphasis was placed on high stability and a low detection limit. With the use of high-performance light emitting diodes (IR-LED) and thermal micro radiators, which were adapted to the needs of gas measurement technology, these goals were achieved in full. In the spectral range from 2 μm to 12 μm, carbon dioxide, carbon monoxide, hydrocarbons and nitrous oxide can be reliably detected up to the ppm range with this new sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research

The INFRA.sens® was specially developed for high-quality NDIR gas analysis. In the design phase, special emphasis was placed on high stability and a low detection limit. With the use of high-performance light emitting diodes (IR-LED) and thermal micro radiators, which were adapted to the needs of gas measurement technology, these goals were achieved in full. In the spectral range from 2 μm to 12 μm, carbon dioxide, carbon monoxide, hydrocarbons and nitrous oxide can be reliably detected up to the ppm range with this new sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research

The INFRA.sens® was specially developed for high-quality NDIR gas analysis. In the design phase, special emphasis was placed on high stability and a low detection limit. With the use of high-performance light emitting diodes (IR-LED) and thermal micro radiators, which were adapted to the needs of gas measurement technology, these goals were achieved in full. In the spectral range from 2 μm to 12 μm, carbon dioxide, carbon monoxide, hydrocarbons and nitrous oxide can be reliably detected up to the ppm range with this new sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research

The ULTRA.sens® is the world’s first OEM gas measurement module based on miniaturized UV LEDs. The stability and lifetime of these UV-LEDs enables high-precision gas analyses down to the ppb range. By using two UV-LEDs 2 gases can be detected simultaneously. With this approach, 2 measuring ranges from ppm to Vol.-% can also be realized. In the spectral range from 200 nm to 500 nm, nitrogen oxides (NO+NO2), aromatic hydrocarbons, hydrogen sulphide, ozone, sulphur dioxide and chlorine can be reliably detected with this novel sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research

The ULTRA.sens® is the world’s first OEM gas measurement module based on miniaturized UV LEDs. The stability and lifetime of these UV-LEDs enables high-precision gas analyses down to the ppb range. By using two UV-LEDs 2 gases can be detected simultaneously. With this approach, 2 measuring ranges from ppm to Vol.-% can also be realized. In the spectral range from 200 nm to 500 nm, nitrogen oxides (NO+NO2), aromatic hydrocarbons, hydrogen sulphide, ozone, sulphur dioxide and chlorine can be reliably detected with this novel sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research

The ULTRA.sens® is the world’s first OEM gas measurement module based on miniaturized UV LEDs. The stability and lifetime of these UV-LEDs enables high-precision gas analyses down to the ppb range. By using two UV-LEDs 2 gases can be detected simultaneously. With this approach, 2 measuring ranges from ppm to Vol.-% can also be realized. In the spectral range from 200 nm to 500 nm, nitrogen oxides (NO+NO2), aromatic hydrocarbons, hydrogen sulphide, ozone, sulphur dioxide and chlorine can be reliably detected with this novel sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research

The ULTRA.sens® is the world’s first OEM gas measurement module based on miniaturized UV LEDs. The stability and lifetime of these UV-LEDs enables high-precision gas analyses down to the ppb range. By using two UV-LEDs 2 gases can be detected simultaneously. With this approach, 2 measuring ranges from ppm to Vol.-% can also be realized. In the spectral range from 200 nm to 500 nm, nitrogen oxides (NO+NO2), aromatic hydrocarbons, hydrogen sulphide, ozone, sulphur dioxide and chlorine can be reliably detected with this novel sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research

For the detection of NO and H2S an EDL (electrodeless gas discharge lamp) is used. A combination of both technologies (UVRAS & UVLEDs) allows simultaneous gas analysis of NO, NO2 and SO2 in the lower ppm range, which is particularly important in flue gas analysis (CEM)2. In the EDL, N2 and O2 are converted to NO and produce selective UV radiation. With this radiation a cross sensitivity free NO measurement is made possible. This method is called UV resonance spectroscopy (UVRAS). Applications Exhaust gas monitoring (CEM)2 Laboratory area Biogas research Industrial gas analysis Engine test benches Portable gas analysis (PEMS)3 Features & Benefits Simultaneous NOx and SO2 analysis Temperature controlled up to 55°C Fast response time < 3 seconds Durable EDL (> 16000h) Flow-independent measurement 0-2L/min No influence of gas humidity No NOx converter required High accuracy Low power consumption Compact size

KOMBI.sens® is a combination of ULTRA.sens® and INFRA.sens® with common base electronics. With this unit, up to 3 gas components can be measured simultaneously. The base electronics can simultaneously supply IR and UV radiation sources. This system is an ideal platform for the detection of multi-component gas at different concentration ranges (vol% and ppm) Combination of IR and UV technology Up to 3 gases + O2 Space-saving construction Cross-billing possible with each other Applications Elemental Analysis Industrial Gas Analysis Emission monitoring (CEM) Laboratories Biogas Research Properties Optimal adaptation to the measuring task Combination of IR and UV technology High accuracy Low power consumption Compact size