Injection mould - Import export

Injection moulded, straight teeth. Engagement angle 20°. Axis angle = 90°. Machined bores from module 1.5. Polyacetal, white. Polyketone, ivory tone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Injection moulded gear wheels may have internal manufacturerelated cavities. These may become visible during drilling or broaching. They do not impair the function. Bevel gear wheels are supplied as single components. To obtain a pair of bevel gear wheels, please order the specified mating gear as well.

Injection moulded, straight teeth. Engagement angle 20°. Machined bore. Polyacetal, white. Polyketone, ivorytone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Injection moulded gear wheels may have internal manufacturerelated cavities. These may become visible during drilling or broaching. They do not impair the function. The torques specified in the tables relate exclusively to the toothing.

Injection moulded, straight teeth. Engagement angle 20°. Polyacetal, white. Polyketone, ivory tone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Due to the material properties, plastic gear racks are not straightened. L= nominal length 250 mm. The actual length is roughly a whole multiple of the pitch.

Economic injection molding presses. A REP injection unit combined with a closing unit of a Tung Yu press. This combined technology offers openended options Separate extrusion and injection thanks to the "Y" type injection unit. 2 or 3stroke closing unit. Proportional closedloop temperature control. Optimized floor space and ergonomics thanks to its modular design.

Machine features Clamping force 4,000 kN. Platen size 750 x 800 x 80 mm. Injection volume 2,000 cm³ or 5,000 cm³. The H610 allows Automated productions. Injection molding (more or less simple parts). A small footprint and height. An optimized cycle time. etc.

Designed for the manufacture of highvoltage insulators (550 kV), this press is one of the largest presses made by REP. The dimensions of the parts to be injected explain the huge size of the press 660 mm in diameter, 2,600 mm long, moulded in one go. The production of a complete insulator is therefore performed in one or two cycles, thus significantly increasing the profitability and reliability of the parts. Machine features Closing force 24,000 kN Size of the platens 1,500 x 3,000 mm Injection volume 25,000 cm³ x 2 (2 injection units)

Lean range G10 Core The G10 is the 10th generation of REP injection molding machines. With its ergonomic design and intelligent onboard solutions, the G10 generation is branded "Infinitely Smart". The G10 is available in two versions, G10 Core (Lean range) and G10 Extended (Performance range), designed to better meet the varied needs of customers. Lean range G10 Core Vertical rubber injection molding machines REP ideal for less demanding processes. The G10 Core range exists with three clamping forces 1,600 kN 3,050 kN 5,100 kN.

Performance range G10 Extended Intelligent, elegant and efficient The G10 is the 10th generation of REP injection molding machines. With its ergonomic design and intelligent onboard solutions, the G10 generation is branded "Infinitely Smart". The G10 is available in two versions, G10 Core (Lean range) and G10 Extended (Performance range), designed to better meet the varied needs of customers. The G10 Extended is a line of presses adapted to the most demanding processes. The G10 Extended is progressively replacing the G9 generation machines and ranges from 1,600 kN (V410) to 10,200 kN (V910).

CFrame Injection molding machine V19. Optimized floor space and maximum accessibility. The V19 is an advanced Cframe press of 400 kN available in 2 versions, plastic or rubber injection. Its accessibility from three sides makes it ideal for the injection molding of profiles and extruded hoses.

Machine features Closing force 3,200 kN. Size of the platens 1,250 x 630 mm. Injection volume 1,000 cm³. Machine developed for largeseries injection molding involving parts with inserts, such as for example the injection molding of housing seals.

Machine features Clamping force 500 kN. Size of the platens 300 x 300 mm. Injection volume 125 cm³.

Type V410 Extended 1,600kN Machine features Clamping force 1,600 kN. Size of the platens 430 x 510 mm. Injection volume 1,000 cm³. Machine which is particularly used for the production of flat gaskets as used in fuel cell applications. This machine is available in our showroom « Area 111 » in Corbas (France) to perform your test runs for the injection molding of LSR parts.

Type V510 Extended 3,050kN Machine features Clamping force 3,050 kN. Size of the platens 500 x 630 mm (630 x 630 mm optional). Injection volume 1,000 or 2,000 cm³. The G10 Extended range, performance for complex processes. Designed to better meet the various customer requirements with its embedded intelligent solutions.

Type V710 Extended 5,100kN Machine features Clamping force 5,100 kN. Size of the platens 630 x 800 mm (800 x 800 mm optional). Injection volume 2,000; 5 000; 8,500 or 11,000 cm³. The G10 Extended range, performance for complex processes. Designed to better meet the various customer requirements with its embedded intelligent solutions.

Machine features Clamping force 10,200 kN. Size of the platens 1,200 x 1,200 mm. Injection volume 5,000; 8,500 or 11,000 cm³. The G10 Extended range, performance for complex processes. Designed to better meet the various customer requirements with its embedded intelligent solutions. The G10 Extended range will progressively replace the G9 machines and extends from 1,600 kN (V410) to 10,200 kN (V910).

Machine features Clamping force 2,544 kN (station A) / 2 x 785 kN (station B & C). Size of the platens 630 x 500 mm. Injection volume 1,000 cm³; 2,000 cm³ or 5,000 cm³. The CMX (CompactMultiStation Generation X G10) is a 4station injection molding press 1 injection station (A), 2 curing stations (B and C), 1 demolding station (D). The CMX machine is available with two clamping forces 1,540 kN (CMX1) or 2,544 kN (CMX2).

Machine features Clamping force 1,540 kN (station A) / 2 x 502 kN (station B & C). Size of the platens 510 x 360 x 55 mm. Injection volume 1,000 cm³; 2,000 cm³ or 5,000 cm³. The CMX (CompactMultiStation Generation X G10) is a 4station injection molding press 1 injection station (A), 2 curing stations (B and C), 1 demolding station (D). The CMX machine is available with two clamping forces 1,540 kN (CMX1) or 2,544 kN (CMX2).

V410 LSR Machine features Clamping force 1,600 kN. Size of the platens 430 x 510 mm. Injection volume 1,000 cm³. Machine which is particularly used for the production of flat gaskets as used in fuel cell applications. This machine is available in our showroom « Area 111 » in Corbas (France) to perform your test runs for the injection molding of LSR parts.

In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.

The CMX (Compact Multi Station of the generation 10) This new machine replaces the former CMS generation and makes the third generation of rotary machines with 2 major innovations. Integration of the processcontrol system of the latest generation (generation 10) with all 4.0 functions. Product range with the CMX1 (160T clamping force) and the CMX2 (250T clamping force). New generation of 4station molding machines The REP solution for large productions with optimal efficiency 90% increase in productivity compared with a singlestation press. 68% increase in productivity compared with a press equipped with a double plate stripping kit. The CMX machine is available with two clamping forces 160T (CMX1) or 250T (CMX2).

Machine features Clamping force 1,950 kN. Size of the platens 450 x 450 mm. Injection volume 1,000 cm³. The H49 is designed for Automated production. Injection molding (more or less simple parts). Low floor space and height requirement. An optimized cycle time. etc

Machine features Clamping force 1,100 kN. Size of the platens 335 x 400 mm. Injection volume 400 or 1,000 cm³

URP Joint venture United Rubber Machinery Strategic Alliance for Asian injection molding machine market between REP and LWB Steinl,

In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.

This press is intended for rubber overmolding of cables used for stone cutting. The cables must be positioned in the mould in the stretched position, and over moulding takes place successively in the jog mode. The “CFrame” design with a closing force of 1,000 kN has been tailored to these presses, because this technology gives access to all sides of the mold, what is essential for the successful finalization of this very special overmolding.

Part of our entry-level range, G9A machines combine REP's expert know-how and Indian skills

The Microject is a micromachine of a clamping force of 60 tons designed for the injection molding and overmolding of inserts used in small parts. Usability and flexibility. Plug and Produce! Characteristics MICROJECT LSR Maximum injection volume 3.77 (at 2000 bar) or 6.94 (at 1500 bar) or 10.37 (at 1000 bar). Clamping force 60 kN. Mould dimensions 150 x 100 mm. Overall dimensions 1.2 x 0.75 m. Simplicity and flexibility Installation in 30 minutes. Mould setting time optimally reduced. Intuitive touch screen interface.