Injection mould - Import export

Plastic injection molding tool. The special features of the tool are the shape of the inserts or the configuration of the surface and many small holes.

Injection moulded, straight teeth. Engagement angle 20°. Polyacetal, white. Polyketone, ivory tone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Due to the material properties, plastic gear racks are not straightened. L= nominal length 250 mm. The actual length is roughly a whole multiple of the pitch.

Injection moulded, straight teeth. Engagement angle 20°. Machined bore. Polyacetal, white. Polyketone, ivorytone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Injection moulded gear wheels may have internal manufacturerelated cavities. These may become visible during drilling or broaching. They do not impair the function. The torques specified in the tables relate exclusively to the toothing.

Injection moulded, straight teeth. Engagement angle 20°. Axis angle = 90°. Machined bores from module 1.5. Polyacetal, white. Polyketone, ivory tone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Injection moulded gear wheels may have internal manufacturerelated cavities. These may become visible during drilling or broaching. They do not impair the function. Bevel gear wheels are supplied as single components. To obtain a pair of bevel gear wheels, please order the specified mating gear as well.

The mold comprises two main parts: the injection mold (A plate) and the ejector mold (B plate), which are also known as moulder and mouldmaker. Plastic resin is introduced into the mold via a sprue or gate in the injection mold. The sprue bushing seals tightly against the nozzle of the injection barrel of the molding machine, allowing molten plastic to flow from the barrel into the mold, known as the cavity. The sprue bushing guides the molten plastic into the cavity impressions through channels on the A and B plates. These channels, called runners, enable the plastic to flow along them. The molten plastic moves through the runner and enters specialized gates, ultimately filling the cavity geometry to create the desired part.

Ramirex - Plásticos de Águeda, Lda. is a Portuguese company with 40 years' experience in the field of plastic injection moulding, manufacturing in its own moulds - catalogue items, or in customer moulds - exclusive pieces. We produce a wide range of catalogue items, from furniture accessories (e.g. sofa legs, made-to-measure roller shutter doors, bats and tops), to drawing and office equipment (e.g. squares, rulers, protractors, paper trays, pen cups and magazine holders), and fencing material (e.g. fasteners and tops). We also manufacture specific and exclusive technical parts for various areas (e.g. for refrigeration equipment, switchboards and various telecommunications devices), designed and developed in-house or externally according to the needs of each client. We are at your entire disposal to develop solutions adapted to your needs.

The advantages for you at a glance: with opening assistance on top of the handle U-profile closure reinforced lock button perfectly suitable for insulating and cooling bags standard material: PCR Application areas: Insulating and cooling/thermal bags, recycling carrier bags, reusable packagings, etc.

The advantages for you at a glance: with opening assistance on top of the handle reinforced design very robust with finger recess for a better hold extremely stable, also for heavy contents perfectly suitable for insulating and cooling bags standard material: PCR Application areas: Insulating and cooling/thermal bags, recycling carrier bags, reusable packagings, etc.

The advantages for you at a glance: with opening assistance on top of the handle button closure with safety closure perfectly suitable for fruit bags (apples, pears, etc.) standard material: LDPE Application areas: Fruit bags, recycling carrier bags, reusable packagings, etc.

Ramirex - Plasticos de Agueda, Lda is a Portuguese company with 40 years of experience in the plastic injection field. We produce our products using our own moulds and exclusive items using our client's moulds. We offer a wide range of products, from furniture accessories (sofa feet, tailor made shutter doors, caps and heads), drawing and office material (set squares, rulers, protractors, letter trays, pen cups and magazine racks) and sealing material (holders and heads). We also manufacture technical parts for different areas (for exemple, for refrigeration equipment, electrical panels and different telecommunication devices), with design and development thay may be either internal or external, according to the requirements of each client. We are a specialized and dynamic technical team, that combines the experience in production of plastic injection parts.

Ramirex - Plásticos de Águeda, Lda. is a Portuguese company with 40 years' experience in the field of plastic injection moulding, manufacturing in its own moulds - catalogue items, or in customer moulds - exclusive pieces. We produce a wide range of catalogue items, from furniture accessories (e.g. sofa legs, made-to-measure roller shutter doors, bats and tops), to drawing and office equipment (e.g. squares, rulers, protractors, paper trays, pen cups and magazine holders), and fencing material (e.g. fasteners and tops). We also manufacture specific and exclusive technical parts for various areas (e.g. for refrigeration equipment, switchboards and various telecommunications devices), designed and developed in-house or externally according to the needs of each client. We are at your entire disposal to develop solutions adapted to your needs.

Your relaible partner from China for injection molds & moulding parts with high- quality and cost-effective solutions, ISO 9001:2015 & IATF 16949 accredited

GC green 2082 MI contains 20% natural fibers and is a biomaterial - allrounder for various injection molding applications. With GC green you get a resource-saving and home-compostable material with ground sunflower seed hulls. The fibers from sunflower seed hulls are a by-product of sunflower oil production. They are GMO-free, do not compete with food and do not require additional acreage. Often this material has already been used for various packages or even plant clips. In order to provide you with an optimal color selection, we have had 10 masterbatch colors certified by TÜV Austria. We will be happy to advise you. Further advantages of GC green: 100% recyclable Reduced cycle times No sink marks Lower energy input In addition to our allrounder compounds, we naturally have many other material formulations. Just contact us, together we will find the perfect compound for your application.

GC green 3092 MIF contains 30% natural fibers and is a biomaterial - allrounder for various injection molding and also thermoforming applications. With GC green you get a resource-saving and home-compostable material with ground sunflower seed hulls. The fibers from sunflower seed hulls are a by-product of sunflower oil production. They are GMO-free, do not compete with food and do not require additional acreage. Often this material has already been used for labels. In order to provide you with an optimal color selection, we have had 10 masterbatch colors certified by TÜV Austria. We will be happy to advise you. Further advantages of GC green: 100% recyclable Reduced cycle times Certified quality No sink marks Lower energy input In addition to our allrounder compounds, we naturally have many other material formulations. Just contact us, together we will find the perfect compound for your application.

GC green 3071 MI T6 contains 30% natural fibers and is a biomaterial - allrounder for various injection molding applications. With GC green you get a resource-saving and home-compostable material with ground sunflower seed hulls. The fibers from sunflower seed hulls are a by-product of sunflower oil production. They are GMO-free, do not compete with food and do not require additional acreage. Often this material has already been used for our thik-walled plantable plant pots or urns. In order to provide you with an optimal color selection, we have had 10 masterbatch colors certified by TÜV Austria. We will be happy to advise you. Further advantages of GC green: 100% recyclable Reduced cycle times No sink marks Lower energy input In addition to our allrounder compounds, we naturally have many other material formulations. Just contact us, together we will find the perfect compound for your application.

GC green 3082 MIF T13 contains 30% natural fibers of sunflower seed shell and is a biomaterial - allrounder for various injection molding applications. With GC green you get a resource-saving and certified-home-compostable material with ground sunflower seed hulls. The fibers from sunflower seed hulls are a by-product of sunflower oil production. They are GMO-free, do not compete with food and do not require additional land for cultivation. Frequently, this material has already been used for the HOMEcap coffee capsule and various packaging in the food sector. Further advantages of GC green: 100 % recyclable Reduced cycle times No sink marks Certified quality Reduced energy input In addition to our allrounder compounds, we naturally have many other material formulations. Just contact us, together we will find the perfect compound for your application.

GC green M2571 7G3 A contains 25% natural fibers and is a biomaterial - allrounder for various injection molding applications. With GC green you get a resource-saving and home-compostable material with ground sunflower seed hulls. The fibers from sunflower seed hulls are a by-product of sunflower oil production. They are GMO-free, do not compete with food and do not require additional acreage. Often this material has already been used for our thin-walled plantable plant pots: Natural Pot. In order to provide you with an optimal color selection, we have had 10 masterbatch colors certified by TÜV Austria. We will be happy to advise you. Further advantages of GC green: 100% recyclable Reduced cycle times No sink marks Lower energy input In addition to our allrounder compounds, we naturally have many other material formulations. Just contact us, together we will find the perfect compound for your application.

Ming Xiao Mfg engaged in custom plastic molded parts by plastic injection molding more than 15 years, our factory is from Ningbo China, we can custom all kinds of plastic molded parts,steel pins inserted plastic parts. We have a variety of injection molding machines, large injection molding machines and small injection molding machines, vertical injection molding machines and horizontal injection molding machines, according to the type and structure of plastic components to choose the most suitable machine to produce, thus saving production and improving production efficiency and quality assurance. Plastic parts is very simple & popular in all industries, such as plastic cover, plastic knob,plastic bracket,plastic flange,plastic valves,plastic gears,plastic bushing,plastic base,plastic shafts,plastic mountings, plastic coupling,plastic fabrications,etc. Plastic injection molding is suit to complicated plastic parts with complex profile or structure, welcome contact us for quoting!

Injection Moulding - please contact us for more information!

Our tooling engineers and designers have extensive experience in creating various blow molds and injection molds. Our in-house tooling department produces molds for most plastic articles made in Philplast as well as molds for use outside our company. We can design, produce and issue technical documentation before the mold making, or we can make molds from 3D documentation provided by the client. In our tooling production we use new fully equipped high-performance CNC machines. The maximum size of our blow molds is for articles up to 20 liters in volume. The maximum dimensions for our injection molds are 546 x 896mm with a maximum weight of 2,500kg. All molds made to be used in Philplast are thoroughly tested on out machines to ensure their perfect quality.

Philplast can produce a wide variety of plastic items using the technologies of injection moulding with the following characteristics: Weight: from 0,5 to 1000gr.; Clamping force of the machines: from 50 to 200 tons; Materials: ABS, PA, PC, PS, POM, TPV, TPE, PP, PE, as well as reinforced plastics (glass or mineral filled); Industries: home appliances, automotive, electronics, cosmetics, detergents and others. We also offer a complete set of services that help in the manufacturing of plastic products and mould maintenance: Design, 3D model and a “Rapid Prototype”; Tooling; Mold servicing and repairs; Additional processing and assembly of plastic articles;

Our tooling engineers and designers have extensive experience in creating various blow moulds and injection moulds with the following characteristics: Extrusion blow moulds with volume of the articles up to 20 litres; Injection moulds with a maximum size of 546 mm X 896 mm and a maximum weight of 2,500 kg. We also offer a complete set of services that help in the manufacturing maintenance of mould tools: Design, 3D model and a “Rapid Prototype”; Servicing and repairs.

Injection, injected products (from PP, LDPE, HDPE, etc. materials) – we offer the production on injection moulding machines with the clamp force of 420 – 800 t, moulded piece weight 80 – 3000 g. Our production assortment of injection-moulded products includes e.g. boxes, lids, tiles, protective plastic sides, or plastic containers. We offer the option of injection mould production including product development. Using your own moulds, any products according to specified parameters can be manufactured.

Manufacturing services: Injection parts, moulds packaging - moulding services

moulds for several industries - We produce our products using our own moulds

Injection moulding PET ans insuflation with the highest quality manufacturing

Moulds - bottles for packaging industry, detergents, pharmaceutical

Moulding system this guarantees an excellent service and products - moulding injection

Molding service provides high accuracy and consistency - injection moulding manufacturer/ supplier.