Installation construction - Import export

Lubricant- and mainteance-free Easy to cut Adherent For compact areas Typical applications:Mechanical engineering, materials handling, fixture construction, installation technology, etc. iglidur® Tribo-Tape A180 Delivery program: iglidur® Tribo-Tape V400 Delivery program: Material: iglidur® A160 Low coefficient of friction Best wear-resistance Upto +100 °C Compared to similar thin plastic films, the cost-effective iglidur® A160 tape has a very high wear resistance. Material: iglidur® V400 Extremely wear resistant Highly resistant to media Upto +200 °C The extremely wear-resistant and at the same time very media- and temperature-resistant iglidur® V400 tape shows up to 10 times higher wear resistance in the test compared to special products for machine beds and the like. Lubricant- and mainteance-free Easy to cut Adherent For compact areas Typical applications:Mechanical engineering, materials handling, fixture construction, installation technology, etc. Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0.5 m/min Y = Wear/mass decrease [mg/km] A = PC | B = compound liner | C = PEEK D = PEEK mod. 1 | E = PEEK mod. 2 | F = PET G = iglidur® A160 Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0,5 m/min Y = Wear/mass decrease [mg/km] A = iglidur® V400 | B = PTFE bronze compound iglidur® Tribo-Tape A180 Delivery program: iglidur® Tribo-Tape V400 Delivery program:

The heavy-duty prop can withstand loads of up to 40 tonnes (400 KN) and has a maximum height of 11.3 m. It consists of a height-adjustable end piece with spindle, extendable centre elements and a head piece. The centre sections are available in the following heights: 0.156 m, 0.312 m, 0.625 m, 1.25 m and 2.50 m

With such flexibility, the sales team at Lipp can enable any customer to specify exactly what is needed for their installation. From complete, turnkey systems to individual components and accessories – Lipp can support customers whatever their requirements. Consultation is a primary objective for Lipp before any work is undertaken. Lipp provides diagnostic tests, efficiency calculators and flow sheets to visualise a tank system and inform the customer of the performance they can expect. This is especially useful for anaerobic digestion – where Lipp experience supports the efficiency and safety of the system from design through to construction. Particular attention is always paid to the content to be stored within the storage system, which allows Lipp to offer customers the chemically stable materials and accessories to get the most from their storage tanks and digesters. Fundamentally, Lipp’s focus on the customer allows consultation and sales to be perfectly integrated

Extension of workability time, e.g. for bridging of extended transportation or installation times, avoidance of construction joints, reduction of temperature peaks, specially in massive concrete components. Retarder for all concrete applications including concrete for road decks and bridges.

The automated assembly technology in the LIPP Double Seam System enables the fast construction of stainless steel tanks which has a positive effect on investment costs. Efficient production on site, minimal installation space and a short construction time are key features of this flexible construction technology.

Short description: The high-grade water hose TRIX-SUPER® is the high-grade water hose for conveying water at high pressure. By easily handling working pressures up to 30 bar, it is especially suitable for challenging applications like transporting pressure- und cooling water, but also for simple sprinkling, filling, discharging, rinsind and cleaning in industry, construction, municipal installations, farming, car pools, garages and workshops.

Features • Continuous installation without readjustments of the screw • Rapid and convenient installation of the Acrobat • Short construction for narrow spaces • Comfortable handle for pleasant and safe working Description & Area of Application • For fastening the Acrobat • Metal mounting pliers, with head and two handles with slip protection • Enlarged screw holder for all sizes M4 to M8

Explore the benefits of noise barrier rental for your events or construction projects. Enjoy a 16 dB or even 20 dB certified noise reduction index, easy installation on standard 2×3.5m construction fences, and the convenience of lightweight, foldable solutions. Discover the advantages of renting acoustic barriers for effective noise control.We rent our noise barriers across the EU.

Our high-quality steel barrier not only serves as scratch as well as ram protection, but also as effective collision protection for forklift trucks, pallet trucks and other vehicles in working environments. With its eye-catching yellow powder coating, it not only offers an attractive appearance, but also improves visibility to prevent accidents. The barrier is available in different overall lengths - 400 mm, 800 mm, 1000 mm, 1200 mm and 1500 mm - and flexibly adapts to your needs. Its robust construction and simple installation guarantee immediate protection for your walls. Thanks to the 45° mitre, it is even possible to build the barrier around corners to ensure comprehensive protection. Invest in the safety of your working environment and order our steel barrier as scuff protection today. Rely on quality, functionality and durability for effective protection against damage from vehicles.

Especially in the checkout area or at advisory tables, sales staff and customers come into direct contact with each other. The current hygiene regulations require a certain minimum distance to fellow human beings. Our "Quattro" spit shield offers the optimum protection in this situation. As spit or sneeze protection, the stable frame construction is installed in the checkout area or counter area. The large area of 1050 mm width and 850 mm height protects employees and customers. The height of the pass-through is 30 mm. You would like to order this product in a different format? Please ask us for this! For cleaning the material we recommend warm soapy water and a soft microfibre cloth.

This installation includes cable duct construction, cable laying, connection of the control cabinet, components and drives, and grounding in accordance with regulations.

The spirit level is an indispensable tool for any handyman worthy of the name. Generally used on construction and renovation sites, it is used to check the stability and reliability of structures. Indeed, it is a measuring tool used to check the verticality or horizontality of a surface. Here are some common scenarios where a spirit level is commonly used: • Construction and Carpentry • Installing Fixtures and Furniture • Tiling and Flooring • Picture Hanging • Plumbing and Electrical Work • DIY Projects • Surveying and Landscaping

The GEMÜ 487 Victoria® soft seated butterfly valve is manually operated. It has a metal hand lever or gearbox according to customer requirements. The butterfly valve is available in nominal sizes DN 25 - 600 and in various body versions such as Wafer, Lug and U section. — Approvals: Drinking water (DVGW, ACS, WRAS, Belgaqua), gas (DVGW) — Low torques — Simple installation — Modular construction — Extensive applications using a variety of materials — Advanced seal design - even for larger diameters — Body coating in accordance with ISO 12944-6 C5-M — Suitable for coastal and offshore areas as well as in buildings with high condensation problems and contamination

GEMÜ 481 Victoria® soft seated butterfly valve has a metal actuator and is pneumatically operated. The butterfly valve is available in nominal sizes DN 25 - 600 and in various body versions such as Wafer, Lug and U section. — Approvals: Drinking water (DVGW, ACS, WRAS, Belgaqua), gas (DVGW) — Low torques — Simple installation — Modular construction — Extensive applications using a variety of materials — Advanced seal design - even for larger diameters — Body coating in accordance with ISO 12944-6 C5-M — Suitable for coastal and offshore areas as well as in buildings with high condensation problems and contamination

Soft, permanently elastic foam block for cable and combination insulation. Vertical and transverse installation to achieve different fire resistance classes. Can be combined with the two-component fire protection foam PYROSIT® NG. Can be used in solid ceilings and walls and in light-duty partitions and is approved for many installations. CE-labelled construction product according to ETA-15/0803 for applications with fire resistance periods of up to 120 minutes. Details on the applications can be found in the approval documents. Protect the surface of the insulation with foams against water in order to guarantee safe expansion in the case of fire. Coating with standard silicone is approved.

VariAll is a stainless steel cable routing and installation system for the hygienic laying of cables. The system is a product designed for hygiene: simple and accessible for cleaning. This cable management system is a quality product with a long service life. All cable routing elements are made of 5 mm round material - with an optical finish. This protects the cables and hoses. The cable routing elements are supplied in lengths of 3 meters. Thanks to a wide range of mounting accessories, installation on the wall or ceiling is very easy. The elements are joined together with screw connectors. The complete hanging technology is innovative in this mounting system. This means that the electrician can work comfortably at the assembly table when installing the fermentation control. This system creates a new, simpler and more comfortable way of working for the installer on site at the construction site.

SANHA-Box for dry-wall construction, radiator installation. The SANHA-Box greatly reduces labour in dry-lining applications. Cavities, noise insulation or stability are real challenges. The SANHA-Box allows robust and very precise installation of all pipes, fittings, etc. including mounting frames and cross-members

Fully preconfigured time-saving SANHA installation box for dry-wall construction, with two sink connections, for dry masonry walls. Integrated sound insulation and condensate protection.

Practical system push fittings with safe and innovative lock function from copper alloys for use in a system with SANHA MultiFit®-Flex and MultiFit®-PEX multi layer plastic tubes for hygienic drinking water and reliable heating installations.  Due to their sophisticated construction, SANHA system push fittings offer an especially safe and durable connection and are just as tight as press fittings. The push connection is easy to make and has the distinct advantage that no tools are required. In this way, using 3fit®-Push fittings incurs no cost for buying, repairing or maintenance of press machines. 3fit®-Push system fittings are ideally suited in narrow spaces where it might be difficult to press fittings with jaws or slings such as during the renovation of buildings.

Fully preconfigured SANHA installation box for dry-wall construction, with two wash basin connections. With sound insulation and condensate protection. One female threads Rp 1/2", one multilayer pipe connections 16 mm. 270 x 350 x 70 mm (length x width w/o plate/width with plate x depth).

Kronseder KFT fresh exhaust air dryer in the form of an assembly set or in a sea container 15 m³ - 30 m³ The containers are built to standard dimensions. Length 6 m or 12 m. Hot water or electricity is offered as heating medium. The ventilation and heating system is installed in a tower construction. Appropriate inlet and outlet air flaps are provided for demoisturizing. The dryer can be used to dry simple types of wood, such as spruce and Douglas fir, and for heat treatment in compliance with IPPC.

The European Drinking Water Directive 98/83/EC describes water as our most important good and thus highlights the importance of its protection. Drinking water is of high value as it has a direct impact on human health. For drinking water installations, that means that planning, construction and operation of a drinking water system should not cause illnesses due to mistakes or errors. A regular test for drinking water is prescribed in the Directive 98/83/EC. All member states need to adopt these regulations and should have adjusted them to the state's specific needs and conditions. — made of lead-free brass for sampling all chemical and microbiological parameters — rotable around 360° — chemically and thermally desinfectable/ deflagratable — easy installation — vertical sampling in all installation positions — lead-free body — incl. adapter to 3/8" male thread

For an easy unrolling of cable drums and cable rings. Dynamic roll-off brake for a steady tensile force: The breaking effect is adapted to the weight.

Manual ring unwinder for rings with a maximum diameter of 290 mm.

Manual unwinder for spools with a maximum diameter of 440 mm. For smaller spools we recommend SPULFIX 300 (spool-Ø max. 290 mm).

Manual unwinder for spools with a maximum diameter of 290 mm. For lager spools we recommend SPULFIX 450 (spool-Ø max. 440 mm).

Our company provides a full range of services for the development and implementation of automated process control systems for industrial enterprises. We are ready to help with the design, modernization, start-up and maintenance of various production lines or individual units of technological processes. 1423 engineering projects have been completed in close cooperation with the technologists and design teams of our clients. We automate existing production facilities, participate in the development and installation of facilities under construction, supply equipment and carry out commissioning, perform further technical and service maintenance. For today, our team is more than 150 people: engineers, managers, equipment installation and maintenance specialists. Be assured – we will carefully study your tasks and provide the best solutions.