Installation construction - Import export

Lubricant- and mainteance-free Easy to cut Adherent For compact areas Typical applications:Mechanical engineering, materials handling, fixture construction, installation technology, etc. iglidur® Tribo-Tape A180 Delivery program: iglidur® Tribo-Tape V400 Delivery program: Material: iglidur® A160 Low coefficient of friction Best wear-resistance Upto +100 °C Compared to similar thin plastic films, the cost-effective iglidur® A160 tape has a very high wear resistance. Material: iglidur® V400 Extremely wear resistant Highly resistant to media Upto +200 °C The extremely wear-resistant and at the same time very media- and temperature-resistant iglidur® V400 tape shows up to 10 times higher wear resistance in the test compared to special products for machine beds and the like. Lubricant- and mainteance-free Easy to cut Adherent For compact areas Typical applications:Mechanical engineering, materials handling, fixture construction, installation technology, etc. Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0.5 m/min Y = Wear/mass decrease [mg/km] A = PC | B = compound liner | C = PEEK D = PEEK mod. 1 | E = PEEK mod. 2 | F = PET G = iglidur® A160 Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0,5 m/min Y = Wear/mass decrease [mg/km] A = iglidur® V400 | B = PTFE bronze compound iglidur® Tribo-Tape A180 Delivery program: iglidur® Tribo-Tape V400 Delivery program:

With such flexibility, the sales team at Lipp can enable any customer to specify exactly what is needed for their installation. From complete, turnkey systems to individual components and accessories – Lipp can support customers whatever their requirements. Consultation is a primary objective for Lipp before any work is undertaken. Lipp provides diagnostic tests, efficiency calculators and flow sheets to visualise a tank system and inform the customer of the performance they can expect. This is especially useful for anaerobic digestion – where Lipp experience supports the efficiency and safety of the system from design through to construction. Particular attention is always paid to the content to be stored within the storage system, which allows Lipp to offer customers the chemically stable materials and accessories to get the most from their storage tanks and digesters. Fundamentally, Lipp’s focus on the customer allows consultation and sales to be perfectly integrated

Extension of workability time, e.g. for bridging of extended transportation or installation times, avoidance of construction joints, reduction of temperature peaks, specially in massive concrete components. Retarder for all concrete applications including concrete for road decks and bridges.

The automated assembly technology in the LIPP Double Seam System enables the fast construction of stainless steel tanks which has a positive effect on investment costs. Efficient production on site, minimal installation space and a short construction time are key features of this flexible construction technology.

Short description: The high-grade water hose TRIX-SUPER® is the high-grade water hose for conveying water at high pressure. By easily handling working pressures up to 30 bar, it is especially suitable for challenging applications like transporting pressure- und cooling water, but also for simple sprinkling, filling, discharging, rinsind and cleaning in industry, construction, municipal installations, farming, car pools, garages and workshops.

Features • Continuous installation without readjustments of the screw • Rapid and convenient installation of the Acrobat • Short construction for narrow spaces • Comfortable handle for pleasant and safe working Description & Area of Application • For fastening the Acrobat • Metal mounting pliers, with head and two handles with slip protection • Enlarged screw holder for all sizes M4 to M8

Especially in the checkout area or at advisory tables, sales staff and customers come into direct contact with each other. The current hygiene regulations require a certain minimum distance to fellow human beings. Our "Quattro" spit shield offers the optimum protection in this situation. As spit or sneeze protection, the stable frame construction is installed in the checkout area or counter area. The large area of 1050 mm width and 850 mm height protects employees and customers. The height of the pass-through is 30 mm. You would like to order this product in a different format? Please ask us for this! For cleaning the material we recommend warm soapy water and a soft microfibre cloth.

This installation includes cable duct construction, cable laying, connection of the control cabinet, components and drives, and grounding in accordance with regulations.

The GEMÜ 487 Victoria® soft seated butterfly valve is manually operated. It has a metal hand lever or gearbox according to customer requirements. The butterfly valve is available in nominal sizes DN 25 - 600 and in various body versions such as Wafer, Lug and U section. — Approvals: Drinking water (DVGW, ACS, WRAS, Belgaqua), gas (DVGW) — Low torques — Simple installation — Modular construction — Extensive applications using a variety of materials — Advanced seal design - even for larger diameters — Body coating in accordance with ISO 12944-6 C5-M — Suitable for coastal and offshore areas as well as in buildings with high condensation problems and contamination

GEMÜ 481 Victoria® soft seated butterfly valve has a metal actuator and is pneumatically operated. The butterfly valve is available in nominal sizes DN 25 - 600 and in various body versions such as Wafer, Lug and U section. — Approvals: Drinking water (DVGW, ACS, WRAS, Belgaqua), gas (DVGW) — Low torques — Simple installation — Modular construction — Extensive applications using a variety of materials — Advanced seal design - even for larger diameters — Body coating in accordance with ISO 12944-6 C5-M — Suitable for coastal and offshore areas as well as in buildings with high condensation problems and contamination

Soft, permanently elastic foam block for cable and combination insulation. Vertical and transverse installation to achieve different fire resistance classes. Can be combined with the two-component fire protection foam PYROSIT® NG. Can be used in solid ceilings and walls and in light-duty partitions and is approved for many installations. CE-labelled construction product according to ETA-15/0803 for applications with fire resistance periods of up to 120 minutes. Details on the applications can be found in the approval documents. Protect the surface of the insulation with foams against water in order to guarantee safe expansion in the case of fire. Coating with standard silicone is approved.

VariAll is a stainless steel cable routing and installation system for the hygienic laying of cables. The system is a product designed for hygiene: simple and accessible for cleaning. This cable management system is a quality product with a long service life. All cable routing elements are made of 5 mm round material - with an optical finish. This protects the cables and hoses. The cable routing elements are supplied in lengths of 3 meters. Thanks to a wide range of mounting accessories, installation on the wall or ceiling is very easy. The elements are joined together with screw connectors. The complete hanging technology is innovative in this mounting system. This means that the electrician can work comfortably at the assembly table when installing the fermentation control. This system creates a new, simpler and more comfortable way of working for the installer on site at the construction site.

SANHA-Box for dry-wall construction, radiator installation. The SANHA-Box greatly reduces labour in dry-lining applications. Cavities, noise insulation or stability are real challenges. The SANHA-Box allows robust and very precise installation of all pipes, fittings, etc. including mounting frames and cross-members

SANHA prefab installation box for cold water meter installation in masonry construction, with thermal and sound insulation, condensate protection. Foam body with multilayer pipes and fitting connections inside. 1 water meter base unit and 1 straight cutoff valve, 2 female threaded ends Rp 3/4, 240 x 350 x 70 mm

Fully preconfigured time-saving SANHA installation box for dry-wall construction, with two sink connections, for dry masonry walls. Integrated sound insulation and condensate protection.

Practical system push fittings with safe and innovative lock function from copper alloys for use in a system with SANHA MultiFit®-Flex and MultiFit®-PEX multi layer plastic tubes for hygienic drinking water and reliable heating installations.  Due to their sophisticated construction, SANHA system push fittings offer an especially safe and durable connection and are just as tight as press fittings. The push connection is easy to make and has the distinct advantage that no tools are required. In this way, using 3fit®-Push fittings incurs no cost for buying, repairing or maintenance of press machines. 3fit®-Push system fittings are ideally suited in narrow spaces where it might be difficult to press fittings with jaws or slings such as during the renovation of buildings.

Fully preconfigured SANHA installation box for dry-wall construction, with two wash basin connections. With sound insulation and condensate protection. One female threads Rp 1/2", one multilayer pipe connections 16 mm. 270 x 350 x 70 mm (length x width w/o plate/width with plate x depth).

The European Drinking Water Directive 98/83/EC describes water as our most important good and thus highlights the importance of its protection. Drinking water is of high value as it has a direct impact on human health. For drinking water installations, that means that planning, construction and operation of a drinking water system should not cause illnesses due to mistakes or errors. A regular test for drinking water is prescribed in the Directive 98/83/EC. All member states need to adopt these regulations and should have adjusted them to the state's specific needs and conditions. — made of lead-free brass for sampling all chemical and microbiological parameters — rotable around 360° — chemically and thermally desinfectable/ deflagratable — easy installation — vertical sampling in all installation positions — lead-free body — incl. adapter to 3/8" male thread

For an easy unrolling of cable drums and cable rings. Dynamic roll-off brake for a steady tensile force: The breaking effect is adapted to the weight.

Manual ring unwinder for rings with a maximum diameter of 290 mm.

Manual unwinder for spools with a maximum diameter of 290 mm. For lager spools we recommend SPULFIX 450 (spool-Ø max. 440 mm).

Manual unwinder for spools with a maximum diameter of 440 mm. For smaller spools we recommend SPULFIX 300 (spool-Ø max. 290 mm).

Air exchange in sealed housings? No Problem! Our pressure equalisation elements (formerly Gothe & Co. GmbH) have proven themselves reliably worldwide. High temperatures and adverse environmental influences provide continuous pressure fluctuations in sealed housings – protect your sensitive electronics and improve the lifetime of electronic devices with our pressure equalisation elements. Reliable reduction of condensate formation Protection of harmful fluids and particles Special Features Flat construction Easy installation (from inside or outside) 100% Salt retention capacity Very robust Diverse versions Air passage of up to 400 ml/min Technical Data Mounting body/cap brass (optional nickel-plated, chrome-plated or stainless steel) Membrane ePTFE (oleophobic) O-Ring NBR (optional EPDM, FKM or silicone) Water ingress pressure > 0,6 bar Protection class DIN EN 60529 IP66, IP68 (installed) Acceptable temperatures - 40 °C … + 80 °C (150°C temporary)

Adapter RSAM80 & RSAMG80 Bridge construction and bridge monitoring Tunnel construction Earth and rock monitoring – e.g. steeply upwards or along the slope Enables measurements and monitoring from virtually any angle, where space is tight and on hard-to-reach areas The clip system allows the original measurement point to be restored both quickly and cheaply in the event of damage. Many measurements can be carried out within a short time when used with up-to-date total stations. Drilling is no longer required as pre-installed anchor sleeves for Dw15 threads can be used for mounting Anchor sleeves can be installed during the construction phase for survey points, e.g. above and below the bridge support, in the case of retaining structures and in many more applications. Material: Stainless steel V4A Temperature and UV-resistant Crosshairs are imprinted on the backing plate under the exact centre of the reflective target to ensure the survey point is durably marked. If the reflective t

[PERFECT PUMP] - The diaphragm pump uses compressed air as a power source, for various corrosive liquids, with granular liquid, high viscosity, volatile, flammable, toxic liquid, can be exhausted and sucked out.（Not applicable to more than 70 degrees) [EFFICIENT DESIGN & CAPABILITIES] - Our Diaphragm Pumps are compact, light weight & built of a polypropylene body for rigorous applications & material. [PERFECT STRUCTURE] - Features an externally serviceable air distribution system and all-bolted construction. [EASY to INSTALL] - The structure is simple, and the wearing parts are few. The pump has a simple structure, easy installation and maintenance. [WIDELY USED] - Used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc.