Sandblasting equipment - Import export

WIWOX® MT micro blasters are used for precise blasting with blasting nozzles from 0.4 – 1.8 mm. Surfaces can be smoothed, matted, deburred or cleaned. All mineral media, e.g. glass beads, broken glass, corundum, silicon carbide in the grain size range from 0 to 300 mμ serve as blasting media. The abrasive is used only once. The blasted surface is reproducible. Only a compressed air connection is required to operate the equipment. Micro-Tip fine blast units are suitable as portable free blast units or in combination with a blast cabinet. Micro-Tip fine blasting technology is available as a pressure or injector process. All units are equipped with foot pedal, pressure regulator, manometer and carbide nozzles.

WIWOX® DP-EU pressure blasting cabinets clean and process tools and parts in just a few seconds. Fine blasting granulates are shot onto the surface by means of compressed air and remove dirt and corrosion. The blasting nozzle is manually guided during the processing of individual parts. Process automation is also possible. For this purpose, the workpiece or the blasting nozzle is moved by motor. The pressure blasting process is suitable for the removal of all solid, exposed residues and layers, especially on metallic surfaces of production tools and high-quality machine parts. Deburring and finishing of surfaces is also possible. In extensive tests with your tools you can convince yourself of the economic efficiency of our system. We will provide you with a test facility for this purpose after consultation.

WIWOX® DI-EU injector blasting cabinets are designed for use in production and maintenance. Ready for use equipped with integrated cartridge filter and abrasive recovery system. Economical operation with fine-grained abrasives with low air consumption of approx. 800 l/min. at 6 bar blasting pressure. The blasting media is continuously sucked out of the cabinet by a constant negative pressure and separated from dirt and dust in a downstream cyclone. A cyclone screen (possibly with ring magnet) collects coarse impurities. In this way, only clean abrasive remains in circulation. The used abrasive, dust and small impurities are led through the cartridge filter chamber to the dust collecting bucket.

WIWOX® DP-BB blast cabinets with combined blasting and blow-off function (Blast´n´blow®) and ex-protection accord. to 1999/92/EC for paint stripping and surface decoating in seconds. Fine organic blasting media get shot onto the workpiece by compressed air, whereby even stubborn thick layers are loosened in shortest time by the effect of the soft, but sharp-edged granulates. Even sensitive tool surfaces get not damaged. The blasting process is suitable for the removal of all solid, exposed residues, especially on metallic surfaces of production tools and high-quality machine parts. Blasting granulate and blasting pressure are adapted to the respective application. With the pressure blasting process you can clean extruder and injection moulding screws, blowing heads, moulds and profile tools much faster and more gently than with conventional cleaning methods. In extensive tests with your own workpieces you can convince yourself of the economic efficiency of our system.

WIWOX® Spintec top loader spray chamber washing systems are the solution for fast parts cleaning in maintenance! The parts to be cleaned are placed in the washing basket of the system from above. During the washing process, cleaning fluid is sprayed onto the parts from below, above and from the sides. The basket rotates inside the machine, resulting in an even washing result. The detergent reservoir is located in the bottom of the machine and is also equipped with a heater.

Service Cleaning: Our customers count on our contract cleaning team for their daily cleaning needs -. With modern cleaning processes e.g. thermal with pyrolysis, aqueous with ultrasonic or mechanical with lapping blasting we can clean and improve your high quality tools. Whether extrusion or injection molding tools, extruder screws, hot runners, nozzles, filters, molds, screens, adhesive or coating devices - everything will be cleaned by us for you! Detailed advice and documented cleaning of samples ensure consistent results over a long period of time. Test us - In addition to comprehensive advice, we offer you the opportunity to carry out your own cleaning trials of workpieces up to a length of 3 m and / or 4 t in weight. Cleaning trials: Every customer can convince himself of our offer by a free sample cleaning. Whether cleaning, surface treatment or decoating - with us you as a customer can see the result even before the first order!

If the service is right, every production plant will work economically for many years. We offer you a qualified repair and maintenance service, even for older machines and third-party products. Our service technicians will look after you quickly and anywhere with fully equipped vehicles. We pay attention to the good training of our personnel. Experienced mechanics, locksmiths or electronics specialists offer you every support to ensure the perfect functioning of the delivered systems. Our plant service – also for older machines and other manufactures!

Fast delivery of spare and wear parts We have a modern shelf stock of all common wear and spare parts. The delivery guarantee from our own stock is a matter of course for us - as well as for older machines and third-party products. ▪ Blasting gloves/sandblasting gloves ▪ Blasting nozzles/sandblasting nozzles ▪ Clamps ▪ Vent valves ▪ Laminated glass panes ▪ Profile seals ▪ Illumination panes ▪ Filter cartridges ▪ Replacement diaphragms ▪ Sealing rings ▪ Nozzle holder ▪ Blasting hoses/sandblasting hoses ▪ Door seals ▪ Air nozzles ▪ Check valves ▪ Sinter filters ▪ Metering rings ▪ baffle discs and much more.

WIWOX® CORUS HD ultrasonic systems have been specially designed for cleaning high-quality moulds and precision tools. In maintenance these replace the labour-intensive and often ineffective manual cleaning. The ultrasonic cleaning process can be used for all metal moulds, in particular tools for injection moulding, extrusion, rubber processing as well as aluminium and gravity die casting. A typical structure consists of three stages: 1. cleaning, 2. rinsing and 3. passivating. The usable dimensions are matched to common mould sizes. The workpieces to be washed are placed in the tank either with the aid of a washing basket or with a lifting beam. Our ErgoStation is recommended for manual rinsing, drying and post-treatment. The working area is completely enclosed, brightly illuminated and ventilated. Operation is safe and simple, as the moulded parts are loaded laterally through a sliding door and held by a lifting device during treatment.

The WIWOX® VERSA GENIUS+ ultrasonic cleaning system enables individual, demand-oriented mould and parts cleaning. The modular design allows adaptation to almost all process requirements. Later expansion or automation is possible at any time. WIWOX® VERSA GENIUS+ ultrasonic cleaning systems consist of washing, jet, rinsing and drying modules as well as the corresponding accessories. The spectrum ranges from individually operated cleaning basins to fully automated, multi-stage cleaning lines. WIWOX® VERSA GENIUS+ sets new standards in modern plant design. Well thought-out details in the area of guiding the cleaning medium, agitation and process control ensure a flexible and energy-efficient process sequence that meets the requirements. You can convince yourself of the economic efficiency of the system by extensive cleaning tests in our test laboratory. The bath care accessories also play an important role in the cleaning result, the uniform process flow and the operating costs.

The WIWOX® USm Ultrasonic cleaning tanks enable individual, demand-oriented surface treatment in a single or multi-stage process. The modular design allows adaptation to almost all requirements and subsequent expansion or automation is possible at any time. Aqueous cleaning at temperatures between 60° and 80° C ensures absolute degreasing and particle removal. Organic or inorganic residues such as polishing paste, paint, plastic, release agents, oil carbon or lime can be easily removed by using the right cleaner. The workpieces are cleaned within a few minutes. The cleaning result is always perfect and reproducible. The subsequent rinsing process is followed by stain-free post-cleaning or preservation. The WIWOX® ultrasonic cleaning process can be used for all steel moulds as well as brass and copper parts. Especially tools for injection moulding, extrusion, rubber processing, aluminium die casting and gravity die casting.

WIWOX® PYRO paint stripping and decoating oven for particularly large and heavy batches. Particularly powerful furnace technology for the highest demands. With state-of-the-art IPC control and industrial burner technology. This furnace series enables clean, reproducible process parameters as well as state-of-the-art exhaust gas treatment.

Thermal cleaning in the WIWOX® IGS thermal system at up to 500° C removes all organic residues, even from fine bores. Depending on the melting and decomposition point of the residues, they are either melted or pyrolysed. The resulting exhaust air during the carbonization phase is burned in the afterburner chamber at over 850° C. Cleaning in the pyrolysis process requires subsequent post-cleaning. Inorganic components, oxidation residues, corrosion, etc. remain on the tool surface and must be removed. The ultrasonic process with acidic or alkaline cleaning media or the blasting process with organic and mineral abrasives are suitable for this purpose.

WIWOX® VIVERK are single and multi-stage spray chamber cleaning systems for aqueous cleaning, pretreatment and degreasing of tools and parts. Loading takes place via an extendable platform, which can be loaded at an ergonomic working height. The workpieces are mechanically cleaned by means of pump pressure in the spray chamber process. The temperature-controlled washing liquid is sprayed onto the workpiece via a spray frame.The washing plant is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

Single and multi-stage spray chamber washing systems for industrial cleaning and degreasing of tools and parts. Loading takes place via an extendable loading platform at ergonomic working height. Before cleaning, the loading basket is loaded and moved into the rinsing chamber. The individual stainless steel washing nozzles can be easily maintained and adjusted according to the application. The motor-driven spraying rotor completely revolves around the loaded parts. The washing system is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

The device is a rugged Industrial Equipment for industry and trade for marking large quantities. Our model "Professional" is working very effective, economical and requires only one low maintenance. It can be very fine lines to to 1.10 mm accuracy blasted. Furthermore, this machine works quietly and dust free. Technical specifications length 800 mm width 700 mm height about 850 mm (optional changeable) mass 120 kg Compressed air required 2-8 bar

The HL-Druckstrahl-Rücksaug-System for the mobile, dust-free sandblasting of hard / non-dismountable parts, such as steel carriers, running gear or similar large parts. The Mega Clean Master is often used in car body repair shops, shipyards, but also in road and rail traffic. The Mega-Clean-Master is the optimal solution for parts that are difficult to access or can be dismantled, which have strong corrosion or stubborn lacquer parts. Mobile, efficient, dust-free, and thanks to the built-in high-performance print-jet system, the perfect companion for difficult-to-clean parts.

This is the ideal piece of equipment for blasting small and even smaller surfaces of glass and metal for matting, fettling, cleaning, polishing and drilling. All mineral media such as corundum, glass beads, cullet, silicium, walnut and plastic granules in the grain size range of 0 - 300 μ can be used as blasting agents. There is a selection of hard metal nozzles with a diameter of 0.8 mm and 1.0 - 1.2 mm as well as 1.5 mm for various requirements.

Special features of our model range SUPER BABY: • Compact and elegant design • Simple operation • Low material consumption • Highly efficient dedusting • Efficient function • Environment-friendly function without dust harassment • Adjustable material consumption The SUPER BABY has a large door that opens to the top and allows to put in the work pieces easily. Due to the mounted sinkhole the blast media circulation is possible without any other additional equipment. With the controls to adjust the blast media it is easy to adjust the blast-media consumption and to change the blast media type. A built-in nozzle-holder and an injector type blast-head with hardened air- and blast nozzle (manual operation), as well as a working grid allow an easy operation. A Shock-resistant linear fluorescent luminary gives glare-free light in the work area. Efficient injector sandblasting booth Superbaby. Direct from manufacturer, MADE IN GERMANY.

The JUNIOR 40 is a very handy device for various applications. It works according to the suction system, in which the blasting agent is sucked in the nozzle head by the compressed air (injector effect). The blown abrasive is filled into the sand container for re-use via the built-in insert vibrating screen and fed to the blasting nozzle. Depending on the desired surface, all dry blasting agents can be used, such as slag abrasives, glass beads, corundum, silicon, glass grain, chilled sand, etc.

It is a system that is preferably used for small blasting and glass decorations. The closed blasting circuit, which allows dust-free operation (particularly interesting for sandblasting work on already installed objects), is advantageous. The system of the "multi-CIean master" means e.g. The solution for the blasting of small surfaces on large parts of machines and vehicles, which can not be disassembled or transported into a blasting space. Due to its extremely light and compact design, it is also possible to use it on construction sites, scaffolds or e.g. Pipelines possible. This system also offers an alternative for cleaning with toxic chemicals or for complex grinding or brushing. A thorough cleaning or removal of rust, scale or similar deposits can also be carried out without having to perform costly and costly disassembly.

The Modellrange ECONOMIC is made of durable sheet steel. It comes with adjustable media consumption, a blast media collection bin and a sieve to separate blast media from contaminations. The cabinet has two lateral openings with sealing sliders for rod materials. A perforated metal plate with enforcements. The system has a sectional door that opens the complete workspace. The Cabinet comes with a door-safety switch, two large operation holes with multiple rubber Sealings. Monitoring window, sized 400x500 mm, with easy changeable glass/safety-glass panes, as well as 2 durable pneumatic springs. Energy Saving Lamp, attached from outside. Injector-type blast head, with air- and blast nozzle made of hardened steel. The system comes with all necessary compressed air and blast media hoses, oil-water separator, manometer, an electrical magnet valve and a foot switch. On/Off switch, dust filter system 0,55 kW, intermediate pressure turbine. Dust collection bag.

Suitable for all common blast-media, mobile version, with one axis, two solid rubber wheels and a frame to relocate the system. The top side of the pressure pot works as a filling sinkhole, automatic filling valve, closable inspection plate, blast media volume adjustment-unit, Pipes R 1 ¼”, Pressured-air stop valve, Pressured-air entry-coupling, air-taking device for protective hood, tank coupling R 1 ¼” to connect blast hose.

Beam machine for irradiating a glass sheet conveyor belt Transport device supporting roller guide, motor nozzle movement, infinitely variable, attached dust filter system and electronic Control. Max. Lens height for automatically rays 1.200 mm Max. Lens height for manually rays 1.500 mm

The Injektor 80 Power is a very handy device for various applications. It operates according to the suction system, in which the blasting agent is sucked in the nozzle head by the compressed air (injector effect). The blown abrasive is filled into the sand container for re-use via the built-in insert vibrating screen and fed to the blasting nozzle. Depending on the desired surface, all dry blasting agents can be used, such as slag abrasives, glass beads, corundum, silicon, glass grain, hard sand, etc

DSK-Eco series in stable steel plate design with attached dust filter system and automatic blasting agent circulation. Our model DSK-Eco is characterized by its elegant design, simple operation, low material consumption, highly effective dedusting, rational operation. The models of the DSK-Eco range have a large, top-opening sectional door. A blasting medium circuit without any additional device is made possible by the built-in blasting device. A nozzle holder with a continuous jet nozzle, as well as a working grate in the system guarantee an extremely uncomplicated operation. A glare-proof Goliat lamp, exposed to the outside, illuminates the entire work area glare-free. A blasting cyclone recovery unit is used to classify the blasting agent. Efficient pressure-beam cabin of the DSK-Eco series. Direct from manufacturer, MADE IN GERMANY. We adapt the cabin to your needs.

The AQUA BLAST wet blasting cabinet is a combination system for degreasing and simultaneous gentle beams of various workpieces. The water - jet mixture is housed in the cabin swamp. This abrasive mixture is sucked in via a novel centrifugal pump of wear-resistant polyurethane. At the jet of compressed air is additionally adjustable added so as to achieve an optimum surface finish. After loading of the workpiece, the blasting medium mixture flows back into the cabin sump and is thus an abrasive circuit ensured. Battered fine abrasive is suspended from the cab sump and fed to a band filter on the cabin back.

As an experienced manufacturer of sandblasting halls and facilities of blasting houses, we offer with our team, problem solutions tailored to your needs and individual case worked out. Price on request

The filter housing is made of sturdy steel plate with a reinforcement of structural steel frame. Equipped with inlet and outlet openings for the dusty or filtered air. The inspection cap is used to control the automatic filter and has a flap for access to the built-in filter cartridges. These are made of folded polyester material having a filter area of each of 8 and 14 m². Provided with upper and lower reinforcing rings of plastics material for fastening in the holders. The dust drawer is equipped with wheels, allowing easy extraction during disposal of the dust. The centrifugal fan with a flanged electric motor and the fan / motor unit is built up in the filter housing - the motor is bolted with its flanges on the filter housing and surrounded by the sound enclosure.