Heating cables - Import export

Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable – completely embedded in a hard PVC film – and cold lead, length to customer specification, up to 180 m possible. The approved heating mat developed by Klöpper Therm works against the penetration of cold in to the ground and prevents upheaval of the ground and destruction of the foundations. Cold stores and cooling chambers give off cold to their environments. In the area of partly or fully sunk in the ground supports, foundations and floors the underlying soil receives the cold. If the natural heat flow from the environment and the earth is insufficient, the moisture in the ground freezes, expands and the ground is lifted. Depending on the nature of the ground, this may cause substantial damage to buildings. Frost heave protection in cold stores and cooling chambers is, therefore, an essential and a reliable preventative measure against frost damage and damp.

To maintain constant temperature in your tank or container, we provide the appropriate heating system. This could e.g. be implemented by heating the container surface with heating cables for holding temperatures of up to 250 °C. Transportable electrical heating equipment, including circulation pumps, are also available for holding temperature of up to 80 °C.

This heating cable is suitable for almost any tile, marble or laminate floors flooring finish and in particular where the flooring (wood, carpet, vinyl) may be replaced from time to time. It is widely used in indoor comfort floor heating and heating via floor, ice, snow melting for grounds, frost protection for roofs, pipe tracing, kinds of farms, etc 1. ideal for new constructions 2. Wide range of applications 3. Wide range of applications

This heating cable is suitable for almost any tile, marble or laminate floors flooring finish and in particular where the flooring (wood, carpet, vinyl) may be replaced from time to time. It is widely used in indoor comfort floor heating and heating via floor, ice, snow melting for grounds, frost protection for roofs, pipe tracing, kinds of farms, etc 1. ideal for new constructions 2. Wide range of applications 3. Wide range of applications

Bladder and Tank Seamer From the innovators of welding automation, Miller Weldmaster presents the BT2000. Designed to increase tank and bladder production while dramatically reducing labor. Our exclusively designed BT2000 welding heads enable the operator to weld overlaps and top and bottom tape covers, all in one pass. The three seams at one time makes the BT2000 the leading choice for tank and bladder makers worldwide. The low ground construction enables you to construct your tanks using your floor. This unique design reduces floor space while eliminating material handling. For the fastest most efficient means of tank and bladder construction... The BT2000. FEATURES, FUNCTIONS, & BENEFITS Quad Element Simultaneous Hot Air Heat Systems Drive Systems Cable Carrier and Track

Overview for triflex® advantages Other information triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification Overview for triflex® advantages Other information Application examples Interesting applications from a variety of industrial sectors Triflex® R Configure interior separation Define cables, select chain and configure interior separation. Now also for all Triflex® R series! Internal separation configurator Triflex® R QuickRobot Equipment support for various types of robots. Simplified ordering of complete systems. QuickRobot TRC.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11.3 mm e-chain® TRC.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining and separating of the triflex® R - TRC. Assembly Instructions TRC.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRC.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRC.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRC.100 Inner height Bi 1: 37.5 mm Inner height Bi 2: 32.5 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® TRC.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRCF.85 Inner height Bi 1: 30 mm Bending radius R: 135 mm Pitch: 30.6 mm e-chain® TRCF.100 Inner height Bi 1: 37,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11,3 mm e-chain® TRE.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the triflex® R - TRE. Assembly Instructions TRE.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRE.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain®. TRE.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100 Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® TRE.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.40.B Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® TRE.60.B Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRE-B version. Assembly instruction TRE.70.B Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRE.85.B Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100.B Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket Assembly tool triflex® R B-version Assembly tool for disassembly of triflex® R B-version Assembly tool triflex® R B-version TRL.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm bending radii R: 50 mm Pitch: 11,3 mm e-chain® TRL.40 Inner height Bi 1: 15 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the Triflex® R - TRL. Assembly Instructions TRL.60 Inner height Bi 1: 23 mm. Bending radius R: 87 mm. Pitch: 20.4 mm e-chain® TRL.70 Inner height Bi 1: 28 mm Bending radius R: 110 mm Pitch: 25.6 mm e-chain® TRL.100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRLF. 65 Inner height Bi 1: 24.4 mm Bending radius R: 100 mm Pitch: 23.1 mm e-chain® TRLF. 85 Inner height Bi 1: 32.8 mm Bending radius R: 135 mm Pitch: 31 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRLF. Assembly instruction TRLF. 100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables This system is especially suited for: First choice for multi-axis industrial robots Three versions are available: TRC: closed design; TRE: "Easy" design, very easy to fill in from outside; and TRL: the "Light" version, likewise with "easy" design Universally applicable in general mechanical engineering Secure energy supply system Multi-axis (3D movements) High torsional stability Can be shortened and lengthened as required due to the individual elements Large filling space Doesn't get stuck in the interfering edges Small bending radius Simple cable routing for three-dimensional applications with ball-and-socket system for absorption of high tensile strength Cables easy to install and replace (TRE/TRL version) Fiber rod module for partial reinforcement and to give direction TRL - One-piece element, extremely light High tensile strength without additional elements like steel cables, spring elements, etc. Typical industrial sectors and applications First choice for industrial robots Machine tools Handling equipment 6-axis Material handling system General mechanical engineering iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification

Dimensions Width 3.00m, Length 7.00m, Height 2.61m Square meters 21.00m² Description Equipment 2x room; 1x toilet with sink, 1x kitchen, 2x windows, 2x entrance door Insulation 80mm ceiling, 50mm wall All electronic installations are included (fuse box, 230V sockets, ceiling lights, switches, cable ducts, cables). Vinyl flooring 23mm durable. On request we offer transport with unloading. The surcharge is 300 € Individual room design is possible. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 3.00m Length 7.00m Height 2.61m Square meters 21.00m² This offer includes 2x room; 2x windows, 2x entrance door Prefab container with 80 mm roof and 50 mm wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can produce other sizes and colors according to your specifications at short notice. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 3.00m Length 7.00m Height 2.61m Square meters 21.00m² This offer includes 1x room; 2x windows, 1x entrance door Prefab container with 80 mm PUR roof and 50 mm PUR wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can produce other sizes and colors according to your specifications at short notice. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 3.00m, Length 7.00m, Height 2.61m Square meters 21.00m² Description Equipment 1xroom; 2x windows, 1x entrance door Insulation 80mm ceiling, 50mm wall All electronic installations are included (fuse box, 230V sockets, ceiling lights, switches, cable ducts, cables). Vinyl flooring 23mm durable. Crane eyes are included. For unloading with a crane. On request we offer transport with unloading. The surcharge is 300 € Individual room design is possible. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 3.00m Length 7.00m Height 2.61m Square meters 21.00m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 3x windows, 1x entrance door Prefab container with 80 mm roof and 100 mm wall insulation. Exterior cladding made of concrete (fiber cement panels) Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switch, cable ducts, cables). We can make other sizes and colors according to your specifications at short notice. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions width 1.20m, Length 2.20m Height 2.45m Square meters 2.42m² This offer includes 1x toilet with sink, 1x urinal, 1x entrance door, 1x ventilation Insulation with 80 mm mineral wool roof insulation, 50 mm PUR wall insulation. Forklift guides included for easy unloading with a forklift. PVC vinyl floor covering 23mm durable and easy to clean. Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and other colors according to your specifications at short notice. In addition, you can order the following Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €45 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 1.20m, Length 2.20m Height 2.45m Square meters 2.42m² This offer includes 1x toilet with sink, 1x shower, 1x entrance door, 1x ventilation Insulation with 80 mm mineral wool roof insulation, 50 mm PUR wall insulation. Forklift guides included for easy unloading with a forklift. PVC vinyl floor covering 23mm durable and easy to clean. Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and other colors according to your specifications at short notice. In addition, you can order the following Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €45 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width1.10m Length 3.00m Height 2.45m This offer includes 3x toilet with sink, 3x entrance door, 3x ventilation Insulation with 80 mm mineral wool roof insulation, 50 mm PUR wall insulation. Forklift guides included for easy unloading with a forklift. Eyelets for unloading with a crane. PVC vinyl floor covering 23mm durable and easy to clean. Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and other colors according to your specifications at short notice. In addition, you can order the following Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €45 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 1.10m Length 3.00m Height 2.45m This offer includes 2x toilet with sink, 1x shower, 3x entrance door, 3x ventilation Insulation with 80 mm mineral wool roof insulation, 50 mm PUR wall insulation. Forklift guides included for easy unloading with a forklift. Eyelets for unloading with a crane. PVC vinyl floor covering 23mm durable and easy to clean. Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and other colors according to your specifications at short notice. In addition, you can order the following Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €45 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 1.10m Length 3.00m Height 2.45m This offer includes 2x toilet with sink, 1x shower, 3x entrance door, 1x ventilation Insulation with 80 mm mineral wool roof insulation, 50 mm PUR wall insulation. Forklift guides included for easy unloading with a forklift. Eyelets for unloading with a crane. PVC vinyl floor covering 23mm durable and easy to clean. Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and other colors according to your specifications at short notice. In addition, you can order the following Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €45 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 1.20m Length 2.20m Height 2.45m Square meters 2.42m² This offer includes 2x toilet with sink, 2x entrance door, 2x ventilation Insulation with 80 mm mineral wool roof insulation, 50 mm PUR wall insulation. Forklift guides included for easy unloading with a forklift. PVC vinyl floor covering 23mm durable and easy to clean. Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and other colors according to your specifications at short notice. In addition, you can order the following Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €45 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 1.20m, Length 2.20m Height 2.45m Square meters 2.42m² This offer includes 1x toilet with sink, 1x shower, 2x entrance door, 2x ventilation Insulation with 80 mm mineral wool roof insulation, 50 mm PUR wall insulation. Forklift guides included for easy unloading with a forklift. PVC vinyl floor covering 23mm durable and easy to clean. Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and other colors according to your specifications at short notice. In addition, you can order the following Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €45 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 2.30m Length 2.30m Height 2.45m Square meters 5.29m² This offer includes 1x porter container with 1x entrance door, 2x window Insulation with 80 mm mineral wool roof insulation, 50 mm PUR wall insulation. Forklift guides included for easy unloading with a forklift. PVC vinyl floor covering 23mm durable and easy to clean. Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and other colors according to your specifications at short notice. In addition, you can order the following Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €45 Urinal (incl. installation & sealing) 400 € Desired color for complete paintwork (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 2.30m Length 2.30m Height 2.45m Square meters 5.29m² This offer includes 1x porter container with 1x entrance door, 2x window Insulation with 80 mm mineral wool roof insulation, 50 mm PUR wall insulation. Forklift guides included for easy unloading with a forklift. PVC vinyl floor covering 23mm durable and easy to clean. Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and other colors according to your specifications at short notice. In addition, you can order the following Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €45 Urinal (incl. installation & sealing) 400 € Desired color for complete paintwork (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 1.20m, Length 2.20m Height 2.45m Square meters 2.42m² This offer includes 2x shower, 2x entrance door, 2x ventilation Insulation with 80 mm mineral wool roof insulation, 50 mm EPS wall insulation. Forklift guides included for easy unloading with a forklift. Eyelets for unloading with a crane. PVC vinyl floor covering 23mm durable and easy to clean. Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and other colors according to your specifications at short notice. In addition, you can order the following Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €45 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

EXTRA BIG !!! Dimensions Width 6.00m Length 7.00m Height 2.61m Square Meters 28.8 m² NEW! MADE IN GERMANY This offer includes 1x vestibule 1x large room 1x toilet with sink & shower 1x separate kitchen 4x windows 1x entrance door Prefab container with 80 mm PUR roof and 50 mm EPS wall insulation. By request; forklift introductions. Electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). PVC vinyl floor covering 23mm durable and easy to clean. We can make other sizes and colors according to your specifications at short notice. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € The prices DOES NOT include VAT.

EXTRA BIG !!! Dimensions Width 6.00m Length 7.00m Height 2.61m Square Meters 28.8 m² NEW! MADE IN GERMANY This offer includes 1x vestibule 1x large room 1x toilet with sink & shower 1x separate kitchen 4x windows 1x entrance door Prefab container with 80 mm PUR roof and 50 mm EPS wall insulation. By request; forklift introductions. Electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). PVC vinyl floor covering 23mm durable and easy to clean. We can make other sizes and colors according to your specifications at short notice. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € The prices DOES NOT include VAT.

Dimensions Width 2.40m Length 6.00m Height 2.61m Square meters 14.40m² This offer includes 1x room, 1x vestibule, 1x toilet with sink & shower, 1x kitchen, 2x windows, 1x entrance door By request; forklift introductions. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switch, cable ducts, cables). Forklift, wheel loader with pallet fork or crane. We can make other sizes and colors according to your specifications at short notice. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 2.40m, Length 6.00m, Height 2.61m Square meters 14.40m² Description Equipment 2x room; 1x toilet with sink, 1x kitchen, 2x windows, 2x entrance door Insulation 80mm ceiling, 50mm wall All electronic installations are included (fuse box, 230V sockets, ceiling lights, switches, cable ducts, cables). Vinyl flooring 23mm durable. On request we offer transport with unloading. The surcharge is 300 € Individual room design is possible. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 2.40m, Length 6.00m, Height 2.61m Square meters 14.40m² Description Equipment 2x room, 1x kitchen, 3x window, 2x entrance door Insulation 80mm ceiling, 50mm wall All electronic installations are included (fuse box, 230V sockets, ceiling lights, switches, cable ducts, cables). Vinyl flooring 23mm durable.. On request we offer transport with unloading. The surcharge is 300 € Individual room design is possible. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 2.40m Length 6.00m Height 2.61m Square meters 14.40m² This offer includes 1x room; 2x windows, 1x entrance door Prefab container with 80 mm PUR roof and 50 mm EPS wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can produce other sizes and colors according to your specifications at short notice. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 2.40m, Length 6.00m, Height 2.61m Square meters 14.40m² Description Facilities 1 room; 2x windows, 1x entrance door Insulation 80mm ceiling, 50mm wall, 50mm floor All electronic installations are included (fuse box, 230V sockets, ceiling lights, switches, cable ducts, cables). Vinyl flooring 23mm durable. On request we offer transport with unloading. The surcharge is 300 € Individual room design is possible. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 2.40m, Length 6.00m, Height 2.61m Square meters 14.40m² NEW! MADE IN GERMANY Description Facilities Cafe Container Floortoceiling windows with wood paneling, 1x room, 1x entrance door completely glazed Isolation 80 mm ceiling, 80 mm wall All electronic installations are included (fuse box, 230V sockets, ceiling lights, switches, cable ducts, cables). On request we offer transport with unloading. The surcharge is 300 € Individual room design is possible. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Desired color of paintwork (incl. processing) 750 € The price does not include VAT