Inspection - Import export

The Focovision by Transmission SPF-3 is used in optical laboratories where the lenses are mounted into frames. It is connected to the computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, and easy calibration. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it is equipped with a frame positioning device and has a user friendly interface; permitting an operator to learn how to perform the complete lens control of the mounted lenses with little training required. Positioning assistance: The FOCOVISION display provides assistance to the operator to help them position the frame and lens to be measured properly, creating a user friendly and fast process. The positioning target, displayed at every step of the procedure, and operator instructions projected

The Control Unit for Prescription Lenses is a machine dedicated to prescription labs producing at least 1000 jobs per day. This multi-functional automatic machine is the only one on the market to combine the lens inspection according to the ISO/ANSI standards of all lens types, the mapping of freeform lenses, the flexible digital inking and the laser engraving. The measurement data exported by the machine are very useful for an effective process control. The Control Unit for Rx lenses is the perfect tool to increase your customer satisfaction, by improving your quality and optimizing the delivery times.

The control unit for single vision semi-finished lenses (MCSFU) is the perfect tool for the free-form laboratories. With a capactity of more than 360 lenses an hour, the MCSFU detects any picking, supply or data error. It measures, accurately and contactless, the radius of the front curve of the single vision semi-finished lenses. The measured data are directly transmitted to the LMS (Lab Management System) software so that the measured data can be taken into account for the calculation.

The Focovision by Transmission SPV-3 is used in prescription laboratories. It is connected to your computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, easy calibration, and especially its visualization system of the semivisible marks or the upper segment line corner of the addition. This system permits an accurate positioning on the different control points without any lens marking. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it has a user friendly interface permitting an operator to learn how to perform the complete lens control (far view, prism reference point, near view, thickness, shape, etc.) with little training required. Minimal training required Very high measurement speed Flexibility (configurable procedures, easy to adapt, any toleran

The Dual LensMapper, integrated in this unit, gives a mapping of the prescription lens (freeform or conventional) and calculates FOA optical power at the reference points (FV, NV). For the freeforms, it compares the expected design to the real lens and displays an error map. A Go/NoGo decision is made, based on the error map and the list of criteria defined by the lab. Because the A&R AutoMapper is task specific, and the system has a small footprint, you can easily integrate it into the lab, either directly after the surfacing or in the final control (also suitable for checking the cut lenses). The AutoMapper is an excellent investment for a modern lab with a rapid payback! 100 % production control just after surfacing --> direct feedback on production* control of the cut lens - in case of remote edging Non contact measurement Correction of eventual R/L inversion Integrated Dual LensMapper : measurement of free form and conventional progressive lenses Control of power, cyl.

The ProMapper is the A&R table-top solution to provide state-of-the-art optical inspection according to the industry standards (ISO/ANSI), totally independent from the operator. In addition, it supplies freeform surface evaluation based on the A&R Error Map technology, making sure that no surface defect is shipped to the customer. Based on the Error Map, surface quality features like the GMC (Global Mapping Criteria) are evaluated and constitute extremely relevant inspection data for process control applications (Statistical Process Control).

The Pre-shipment-Inspection (PSI) also called final inspection is to ensure the products have been manufactured match to the Clients specifications and packed ready to ship. At this stage, normally 100% of products have been completed。 Our professional quality engineer will help to solve any problems immediately and the inspection report with full information will be emailed to you within 24 hours The Pre-shipment Inspection (PSI) service will include your interests as below but not list all: Contract quantities The packing way and related labels The storage way of your products Appearance Function, size and measurement Reliability and safety tests Related shipping files Other specified requirements from you Sampling techniques will be ANSI/ASQC Z1.4-2003 (equivalent to MIL-STD-105E) or other sampling technique required by you.

To Comply with Health and Safety guidelines it is required that regular in house inspections be carried out and that a full annual inspection be conducted by a ‘technically component’ person. The benefits of carrying out regular inspections, are not only to comply with HSE legislation but also to reduce the risk of racking related incidents promoting good health and safety within the workplace. During an inspection our personnel will complete a Damage Report, they will then go on to produce a Full Rack Inspection Report which will categorise any damage by risk and issued to you. During an inspection our personnel will complete a Damage Report Sheet, they will then go on to produce a Full Rack Inspection Report which will categorise any damage by risk. D&R Racking’s experience and knowledge of storage systems is second to none. We’ve installed small and simple systems for SME clients and racked out entire warehouse systems for larger clients.

We support your manufacturing with our polarised light camera and analytical software. We film production issues of transparent material (vials, blisters, glass items, foils) with polarized light. Defects, scratches, flaws, residual tensions brought in during manufacturing become visible. Hence, they can be corrected and improved. You receive an improved manufacturing process, with higher quality and higher capacity.

Tube round welded,without inspection, not annealed grade 1.4301, 12-1 mm

Tube round welded,without inspection, not annealed ground grit 240, grade 1.4301, 10-1.5 mm

Tube round welded,without inspection, not annealed grade 1.4301, 10-1 mm

Tube round welded,without inspection, not annealed grade 1.4301, 10-1.5 mm

Tube round welded,without inspection, not annealed ground grit 240, grade 1.4301, 10-1 mm

The benefits of carrying out regular inspections, are not only to comply with HSE legislation but also to reduce the risk of racking related incidents promoting good health and safety within the workplace. During an inspection our personnel will complete a Damage Report, they will then go on to produce a Full Rack Inspection Report which will categorise any damage by risk and issued to you. During an inspection our personnel will complete a Damage Report Sheet, they will then go on to produce a Full Rack Inspection Report which will categorise any damage by risk. D&R Racking’s experience and knowledge of storage systems is second to none. We’ve installed small and simple systems for SME clients and racked out entire warehouse systems for larger clients.

Monta gives you the option of adding additional items when packaging the products. This allows you, as a webshop, to include targeted advertising. It may be an extra product, or a discount voucher for a subsequent order. Because these products are added afterwards, no mistakes are made when the order picking trolley is driven around – this is one of the reasons why we have a 99.98 percent performance guarantee. After order picking, every shipment is re-checked at our e-check station before the goods are packed. Here, all barcodes are carefully checked once again, so you can rely on us! Moreover, it’s possible to register the serial number. We always register a serial number for electronic items. This serial number is unique to each individual device. We make sure we register the serial number at the outbound stage, i.e. when the order is packed for shipment. Now we know the exact destination of that particular device.

The Control & Packaging Unit for Stock Lenses is best utilized by large volume single vision lens manufacturers. This machine will inspect and package 900 lenses per hour with such accuracy that there are no errors such as sending out of tolerance lenses out, or rejecting in tolerance lenses. In addition, the automatic cycle prevents any mispackaging of product. The zero defect packaging and the labor costs savings proven by installation of over 100 of these machines worldwide justify the investment in this machine.

Take care of your wind turbine blades and inspect them periodically.

> Click on the "WEBSITE" link for more > When undertaking visual route inspections our Transport Consulting Team consider gradients for delivery, supply Ordnance Survey grid referencing and provide a conclusion of the route(s) inspected. ur visual route inspections begin with the undertaking of a desk based study. Collett Transport Consulting will identify possible loading configurations based on our extensive knowledge and experience of abnormal load and heavy transport projects. Our Transport Consulting visual route inspections identify the loading configurations for each abnormal load and the most suitable route, unless potential routes have already been identified by our client. Our Team will then carry out site visits to determine the feasibility of the identified heavy transport route(s) and to highlight any potential pinch points which could impact on the loaded vehicle.

The Dylight X-ray inspection system is a true 'Plug and Play' solution, combining all functions in one compact unit. It is perfectly suited for the inspection of small products such as snacks, energy bars and sweets. - Hygienic design, following EHEDG principles featuring sloped surfaces and curved edges allowing easy inspection and cleaning, resulting in considerable time and cost savings; - Covering belt widths from 200 mm up to 800 mm; - A wide range of standard possibilities for ensuring product integrity and quality including checking completeness, determining product mass and determining compartment mass; - 15" color touchscreen display; - Combining high detection sensitivity with low power consumption

Send an Asiaction inspector to the factory at any time during production to inspect your goods in China. An important step in the purchasing process in China is the inspection of your goods before they leave the country.

Send an Asiaction inspector to the factory at any time during production to inspect your goods in China. An important step in the purchasing process in China is the inspection of your goods before they leave the country.

Moisture meter Name: HT-3000 thermo-hygrometer - Building inspection Mc: Temperature: -20°C - 70°C (-4°F - 158°F) Dew Point: -40°C - 70°C (-40°F - 158°F ) GPP Range: .1 GPK – 285 GPK (1 GPP – 2000 GPP) Calibrations: Temperature, Dew Point, GPP Range Overview The HT-3000 thermo-hygrometer is a great tool for monitoring the level of humidity during building inspections. With a simple interface, fast acclimation, and useful statistics like dewpoint and grains per pound, the HT-3000 is a great value at an economical price. Use the HT-3000 in conjunction with one of our moisture meters for a thorough assessment of every job. Your Benefits: Bright, clear digital display Fast response time Relative Humidity Range: 0%-100% Temperature Range: -20°C - 70°C (-4°F - 158°F) Dew Point Range: -40°C - 70°C (-40°F - 158°F ) GPP Range: .1 GPK – 285 GPK (1 GPP – 2000 GPP) Automatic power down Reading HOLD feature Size: 20x8x4cm (8” x 3” x 1 5/8”) Weight: 285gr. 10 oz. Rugged construction ensures y

Moisture meter Name: HT-4000 thermo hygrometer - Building inspection Mc: Temperature: -40°C - 124°C (-40°F - 255°F) Dew Point: -40°C - 80°C (-40°F - 176°F ) GPP Range: 0.1 - 3820 GPP (0.01 - 545 GPK) Vapor pressure: 0 - 7 PSI (0 - 47 KPA) Calibrations: Temperature, Dew Point, GPP Range, Vapor Pressure Overview For building inspectors who prefer having separate meters to one combination meter, the HT-4000 is the perfect solution. The HT-4000, a fast response stand-alone thermo-hygrometer has the same fast acclimating RH/T sensor found in our popular TotalCheck and Navigator Pro 3-in-1 moisture meters. Your Benefits: Bright, clear digital display Relative Humidity Range: 0% - 100%, sensor can be used for in-situ concrete testing following the ASTM F170 standard Temperature Range: -40°C - 124°C (-40°F - 255°F) Dew Point Range: -40°C - 80°C (-40°F - 176°F) GPP Range: 0.1 - 3820 GPP (Grains Per Pound) GPK Range: 0.01 - 545 GPK (Grains Per Kilogram) Vapor Pressure Range: 0 - 7 PSI (P

Moisture meter Name: G-79 gypsum moisture meter - Inspection Material: Gypsum, Gypsum Plaster, Plaster, Masonry Mc: 0.2%-1% 1%-8% 8%-50% Calibrations: Gypsum Overview The G-79 was designed specifically to read a wide range of moisture on gypsum. One of our first meters to feature our exclusive gypsum scale, the G-79 is still a favorite for its large analog display and classic design. Your Benefits: Easy-to-read analog display Measures moisture in gypsum using a three-range scale: 0.2%-1%, 1%-8%, and 8%-50% Built-in battery and calibration check Auto-shutoff timer saves battery life Size: 19x10x7 cm (7 3/8” x 3 7/8” x 2 3/4”) Weight: 450 gr. (1 lb) Rugged construction ensures years of reliable use Sturdy plastic carrying case 9V battery 1-year warranty

Moisture meter Name: TotalCheck 3-in-1 building materials moisture meter - Inspection Material: Floorings, Floors, Wooden floors, Wood, walls, drywall, concrete, building materials, concrete slab Mc: 5-60% wood scale (71 species) 0.1–6% drywall scale 0-100 pin mode and 0-300 scan mode (Reference scales for non-wood building materials) Calibrations: Wood species and Drywall Overview Delmhorst’s TotalCheck 3-in-1 meter measures moisture by pin and scan modes, and features a removable thermo-hygrometer attachment that measures ambient temperature and RH, and calculates dew point and GPP. High levels of ambient humidity can be warning signs at inspection jobs. The TotalCheck will guide your inspection with accurate, informative readings every time Your Benefits: Bright, clear digital display Pin Mode: • 5%-60% wood scale • Corrects for 71 individual wood species and temperature (°F and °C) • 0.1% – 6% drywall scale • 0–100 numerical reference scale for non-wood building materials

Moisture meter Name: TechCheckPlus 2-in-1 building materials moisture meter - Inspection Material: Floorings, Floors, Walls, Drywall, Ceilings, Building materials, Wood Mc: 6-60% on wood 0.1-6% on drywall (Delmhorst Exclusive Scale) 0–300 numerical reference scale for non-wood building materials (Scan mode) Calibrations: Wood, Drywall Overview TechCheckPlus 2-in-1 meter is designed to scan and locate moisture levels in buildings. Given the challenging conditions of building inspection, it pays to have an easy-to-use moisture meter that you can depend on. The accurate 2-in-1 TechCheck PLUS was designed with simplicity in mind and helps to make even the most demanding job simple. The newly updated TechCheck PLUS has all the great features you've come to expect, along with some new ones. Your Benefits: Bright, clear digital display Pin mode: • 0.1% - 6% drywall scale, Delmhorst Exclusive • 6%-60% MC wood scale • Integral Contact pins mounted on top of meter provide 8mm (5/16”) pe

Moisture meter Name: BD-10 building materials moisture meter - Inspection Material: Floorings, Floors, Walls, Drywall, Ceilings, Building materials, Wood Mc: 6-40% on wood 0–100 reference scale for non-wood building materials Calibrations: Wood Overview Easy to operate and easy to read, the BD-10 measures moisture in wood and other non-wood building materials. For those who prefer an analog display, the BD-10 is a great alternative to the digital BD-2100. The BD-10 is a great entry level meter, and is ready to go with a single button press! Your Benefits: Easy-to-read analog display Two scales: • Wood Scale - 6% - 40% moisture range. Use for flooring and building material such as wood studs, floor joists, subfloors • Reference Scale - Reads from 0 - 100 on a relative basis. Use on non-wood materials such as concrete, plaster, and insulation Built-in calibration check Integral contact pins mounted on top of meter provide 8mm (5/16”) penetration Built-in connector accepts any De

Moisture meter Name: BD-2100 building materials moisture meter - Inspection Material: Wood, Flooring, Ceiling, Concrete, Drywall, Plaster, EIFS, Roofing, Insulation Mc: 6-40% on wood 0,2-50% on gypsum 0-100 on a relative basis for non-wood materials Calibrations: Wood, Gypsum Overview The best-selling BD-2100 is a versatile moisture tester. Besides testing the moisture content on wooden building materials, it also can be used on gypsum, concrete, sheetrock and other construction materials. The BD-2100 has a digital display, an adjustable alarm, and Delmhorst’s exclusive calibrated drywall scale as well. Your Benefits: Bright, clear digital display Three scales: •Wood Scale - 6% - 40% moisture range. Use for flooring and building material, such as wood studs, floor joists, subfloors •Reference Scale - Reads from 0 - 100 on a relative basis. Use on non-wood materials, such as concrete, plaster, and insulation •Gypsum Scale - 0.2%-50% moisture range. Use on drywall Averages up to