Inspection - Import export

EVB-CT is the world's first high-speed in-line X-ray 3D CT used in battery mass manufacturing. It is already fully operating 24 hours a day in the Battery assembly process of major worldwide manufacturers in Korea and abroad, and it helps prevent faulty manufacturing and improve safety by enhancing cathode/anode alignment quality. 1) First in the world to apply high speed 3D CT 2) Cylindrical Type, Prismatic Type, Pouch Type 3) 99.9% High Reliability CT 4) Cost Effective Maintenance

The Checkweigher Flexus® meets the strictest requirements when it comes to hygienic design guidelines for packaged foods. A wide range of configurations ensure that every requirement is covered. Hygienic design for easy cleaning and the highest level of quality in your production operations Safety and reliability thanks to EMFC load cell technology The ideal solution every time – configure Flexus® for your application Easy to combine with metal detection technology Vistus®

The Focovision by Transmission SPF-3 is used in optical laboratories where the lenses are mounted into frames. It is connected to the computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, and easy calibration. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it is equipped with a frame positioning device and has a user friendly interface; permitting an operator to learn how to perform the complete lens control of the mounted lenses with little training required. Positioning assistance: The FOCOVISION display provides assistance to the operator to help them position the frame and lens to be measured properly, creating a user friendly and fast process. The positioning target, displayed at every step of the procedure, and operator instructions projected

The Control Unit for Prescription Lenses is a machine dedicated to prescription labs producing at least 1000 jobs per day. This multi-functional automatic machine is the only one on the market to combine the lens inspection according to the ISO/ANSI standards of all lens types, the mapping of freeform lenses, the flexible digital inking and the laser engraving. The measurement data exported by the machine are very useful for an effective process control. The Control Unit for Rx lenses is the perfect tool to increase your customer satisfaction, by improving your quality and optimizing the delivery times.

The control unit for single vision semi-finished lenses (MCSFU) is the perfect tool for the free-form laboratories. With a capactity of more than 360 lenses an hour, the MCSFU detects any picking, supply or data error. It measures, accurately and contactless, the radius of the front curve of the single vision semi-finished lenses. The measured data are directly transmitted to the LMS (Lab Management System) software so that the measured data can be taken into account for the calculation.

The Focovision by Transmission SPV-3 is used in prescription laboratories. It is connected to your computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, easy calibration, and especially its visualization system of the semivisible marks or the upper segment line corner of the addition. This system permits an accurate positioning on the different control points without any lens marking. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it has a user friendly interface permitting an operator to learn how to perform the complete lens control (far view, prism reference point, near view, thickness, shape, etc.) with little training required. Minimal training required Very high measurement speed Flexibility (configurable procedures, easy to adapt, any toleran

Our modern inspection and testing equipment allows us to inspect the cast products completely according to your requirements before we deliver them to you. We offer: Inspection of materials (both chemically and mechanically) Delivery under certificate Measurements reports Wall thickness measurement Radiography Penetrant inspection Pressure and leakage tests Endoscopic Ultrasonic Microscopic Hardness measurement 3D scan & 3D-cad comparison

The Dual LensMapper, integrated in this unit, gives a mapping of the prescription lens (freeform or conventional) and calculates FOA optical power at the reference points (FV, NV). For the freeforms, it compares the expected design to the real lens and displays an error map. A Go/NoGo decision is made, based on the error map and the list of criteria defined by the lab. Because the A&R AutoMapper is task specific, and the system has a small footprint, you can easily integrate it into the lab, either directly after the surfacing or in the final control (also suitable for checking the cut lenses). The AutoMapper is an excellent investment for a modern lab with a rapid payback! 100 % production control just after surfacing --> direct feedback on production* control of the cut lens - in case of remote edging Non contact measurement Correction of eventual R/L inversion Integrated Dual LensMapper : measurement of free form and conventional progressive lenses Control of power, cyl.

The ProMapper is the A&R table-top solution to provide state-of-the-art optical inspection according to the industry standards (ISO/ANSI), totally independent from the operator. In addition, it supplies freeform surface evaluation based on the A&R Error Map technology, making sure that no surface defect is shipped to the customer. Based on the Error Map, surface quality features like the GMC (Global Mapping Criteria) are evaluated and constitute extremely relevant inspection data for process control applications (Statistical Process Control).

The LinearLevi-Inspectionmodule enables the inspection of substrates during the contactless transport. It is possible to check the quality of battery cells, foils, packaging, as well as wafers and chips without interrupting the transfer process. There is the opportunity to subsequently sort the substrates according to the inspection results. The application can be delivered in different versions. For example, combinations with the UltraLevi-Desk for contactless transport are possible. Features of the LinearLevi-Inspectionmodule: - Extendable - Various sizes - No particles due to no air turbulence - Double-sided inspection possible - High flatness, also for flexible substrates - Customizable according to customer specifications

The autonomous XL-GEN can be configured in different ways: without arm, ready to integrate an arm from Kinova or with 7 or 6 DOF arm with the option to integrate a 2 or 3 finger gripper. Due to the low power consumption of the arm, this mobile platform has an autonomy of up to 10 hours. Furthermore, XL-GEN, that uses open architecture and modular control ROS, can mount different sensors as lasers and cameras, among others. The robot has two possible kinematic configurations. The omnidirectional configuration mounts mecanum wheels on an independent suspension system. The mecanum wheels can be easily replaced by conventional wheels (rim mount), thus allowing easy switch from the indoor omnidirectional configuration to the versatile skid-steering configuration, both indoors and outdoors. XL-GEN has been designed for several research applications in fields like inspection, medicine, logistics or remote monitoring.

The Masterscan D-70 offers the inspector a fully capable and functional set of tools and software for inspection across all applications. Capabilities include encoded B-Scan, Advanced Thickness logging and Dryscan capability in a portable enclosure. Features Include: Customisable & Inituitive Menus Split DAC/AVG/DGS Angle Measurement Mode. Dryscan capability. Configurable on-board software. Field Upgradeable. Encoded B-Scan A-Scan Fade. 4GByte on-board memory. USB Interface for PC import/export. Video Output for training.

The Pre-shipment-Inspection (PSI) also called final inspection is to ensure the products have been manufactured match to the Clients specifications and packed ready to ship. At this stage, normally 100% of products have been completed。 Our professional quality engineer will help to solve any problems immediately and the inspection report with full information will be emailed to you within 24 hours The Pre-shipment Inspection (PSI) service will include your interests as below but not list all: Contract quantities The packing way and related labels The storage way of your products Appearance Function, size and measurement Reliability and safety tests Related shipping files Other specified requirements from you Sampling techniques will be ANSI/ASQC Z1.4-2003 (equivalent to MIL-STD-105E) or other sampling technique required by you.

Four QuellTech Q6 3D- laser scanners are installed, mutually displaced by an angle of 90°. In this configuration, they are able to monitor the complete surface of the cable running through. It is important that the test does not lower the production speed, therefore very high sampling rates are required, supported by convenient data processing. The measured position of a defect is recorded in cable direction.

Particular Challenges: In the course of the production, endless cables are running at a considerable speed, and supervision has to be carried out nearly under real-time conditions. The size of the objects to be determined, i.e. of the flaws to be discovered, is in the range of only some hundredths of a mm. Another difficulty is the fact that surfaces with very different reflectivity and roughness are involved. In order to be able to check the cables all around, several laser scanners must be in place, mounted at different angles, thus covering the entire range of 360°. Quelltech Solution: The solution consists in a configuration of four Q6 laser scanners, mutually displaced by 90°, so the entire surface of the cables is in the field of view. On the basis of the 100% inline inspection, the position of defects can precisely be determined, without losing too much time.

Particular Challenges: The seal surfaces in this case are made of very glossy metal, with the drawback of emitted reflections. This effect during an optical measurement must be eliminated. Furthermore, it is absolutely necessary to guide the laser scanner on a linear path over the surface, since fluctuations of distance may falsify the measurement result. QuellTech Solution: The Quelltech model Q5 disposes of an adequate resolution in X and Z direction and proves to be able to verify the planarity tolerances and to measure the size of defects. Meanwhile a precise rotary axle, used as guiding element, moves the scanner over the surface to be evaluated. Interfering artefacts caused by the glossy finish are suppressed by particular algorithms integrated within the software. As an encoder value is permanently supplied by the rotary axle, the position of each scanner profile within the point cloud can accurately be determined.

Place of Origin: China Model Number: TXR-1630SO Power: Electronic Certificate: ISO/CE Application: Food Processing Industry Color: Silver gray Warranty: 12 Months Power supply: 110V - 220V Material: SUS 304 Stainless Steel Supply Ability: 50 Case/Cases per Month Payment term:T/T,L/C Lead time:15-30days Package:standard exporting package Port of shipment:China

Special version of the Optigreen Triangle Maxi Inspection Cham-ber TMK with perforated intermediate floor to guide excess water from higher roof areas.For feeding and conveying excess water from rooftops located higher up to floors located lower down Conveys water through downpipes directly into a tie-in conduit with an open inlet at the top, e.g. in case of: Cascading drainage from smaller top floors, feeds roof drainage water from downpipes on façades into drainage levels of underground car parks or similar Can be connected to up to 6 WLP Plus and 3 TSK With perforated sheet metal intermediate partition Walkable

Inspection chamber for use on greened or gravelled roof areas above drains in edge areas directly before any ascending structural components.Special inspection chamber for use over roof drainage outlets at the edge before ascending components, especially for outlets at the side through the fascia Chamber walls and cover with inlet slots, possible to connect 2 lengths triangle water conduit plus on three sides Chamber cover with inlet slots, compressive strength approx. 150 kg Insensitive to humid acid Reverse releasable 80 mm high

Optigrun Edge Inspection Chamber RKS 80 for use on greened or gravelled roof areas above drains on edge areas directly before any ascending structural components.Especially suitable for use around edges in front of rising components Above rainage outlets for green or gravelled rooftops Can be connected to 3 strands of WLP Plus Triangle Water Conduit Inspection lid with entry seals Insulation wedge profile released from the back Walkable

Optigrun Inspection Chamber TAR 250 to keep roof drainage outlets free with four connection options for TAR 80/250 or TAR 120/250.For pressure drainage and keeping drainage outlets free 4 possible connections for the drainage gutter TAR 80/250 or TAR 120/250 (preperforated openings) Chamber walls and lid with entry seals With aluminium chequered plate Walkable

Optigrun Combi Inspection Chamber TKS Plus is a control shaft for use as roof outlet inspection; includes base plate and cover. Extendable in 100 mm increments. Combinable with Triangle Water Discharge Profiles.

Optigrun Polymer Concrete Inspection Chamber PBK to be used as a drainage unit to guide surface water, corresponding to the respective requirements in the suitable composition, on stable substrates (e.g. underground garage decks) with a sufficiently high layer thickness.Inspection chamber for drivable surfaces Different gratings available for vehicular traffic and foot traffic Excess water can also be infed from the drainage level with the aid of TSK water conduits

Optigrun Triangle Maxi Inspection Chamber TMK suitable for negative pressure drainage. Combinable with Triangle and TSK water discharge systems. Drainage capacity for 2 % roof pitch and profiles connected to all four sides: 24 l/s. Extendable in 50 and 100 mm increments.

To Comply with Health and Safety guidelines it is required that regular in house inspections be carried out and that a full annual inspection be conducted by a ‘technically component’ person. The benefits of carrying out regular inspections, are not only to comply with HSE legislation but also to reduce the risk of racking related incidents promoting good health and safety within the workplace. During an inspection our personnel will complete a Damage Report, they will then go on to produce a Full Rack Inspection Report which will categorise any damage by risk and issued to you. During an inspection our personnel will complete a Damage Report Sheet, they will then go on to produce a Full Rack Inspection Report which will categorise any damage by risk. D&R Racking’s experience and knowledge of storage systems is second to none. We’ve installed small and simple systems for SME clients and racked out entire warehouse systems for larger clients.

Eagle X-ray inspection system Pack 430 Pro (as new, only used as demo machine) for product dimensions max. 430mm wide, max. height 215mm Refurbished, new conveyor belt, new detector ! Technical data: Installation length:1.830mm Conveyor belt width:430mm Generator: HR 9 Feeding height:ca. 850mm Delivery height:ca. 850mm Dapu9dl Diodes:optional with 0,8mm or 1,2mm MDX diodes (DUAL ENERGY) Conveying speed with 0,8mm diodes:max. 1,10m/sec Conveying speed with 1,2mm diodes:max. 1,30m/sec Operating hours:approx. 800 Protection class:IP 65 Year of manufacture:2017

For sale is our Göpel X- Ray 3D X-ray inspection machine. B30mpjkn The machine is in very good condition . Ser. No. 17-5411XL-312 Inspection area : 450 mm x 300 mm Operating system : Windows 10 X / Y calibration plate X-ray source : Hamamatsu Type : L 9181-02 All documentation available. Weight : 2600 kg

The MCS42-SEL-AL is a cost effective camera-based AOI system. This solution is optimized for economical and flexible inline inspection of the several production processes. The small and inexpensive system comes with a 42 megapixel, high-definition industry camera and a PC equipped with the powerful modusAOI software whose development includes professional experience of two decades. Characteristics: Single system for inspection of objects. Combination of diverse application tasks in the THT area which take place before a wave soldering or selective soldering oven. Typical tests include confirmation of the mechanical assembly, presence, placement and orientation of plugs, stickers, fixings, reading of barcodes and data-matrix codes.

The system comes with four 42 megapixel cameras and a high-performance control unit. LED lighting including LED control is also included in the delivery. The entire picture of the image analysis is orthogonally calibrated. Characteristics: This system can meet the toughest requirements for the inspection of bipolar plates in various production stages. The system has been adapted to the high requirements of the inspection of bipolar plates. The image acquisition time of approx. 2,5 seconds with a resolution of 24 um is outstanding. Inspection with the high-resolution system cameras is carried out using the tried and tested modusAOI software. Test possibilities: Position and minimum thickness of the graphite coating in the central area Checking the surfaces that should not be coated Coating contamination (graphite/screenprint) Testing of a defined target contour in screen print Damage to the metal at the edge (balcony) of the workpiece