AVITEQ VIBRATIONSTECHNIK GMBH

Germany

Factory icon Manufacturer/ Producer

Verified by Europages badge
AVITEQ VIBRATIONSTECHNIK GMBH
Web icon
Contact

Germany

Verified by Europages badge

The AViTEQ Hopper discharge unit is used below hoppers, silos, bunkers or bulk containers for flowable bulk materials and serves as a combined closure, discharge, transportation and metering device. It is used where high material flows are required. Short hopper discharge units are mounted directly below the bulk hopper. Depending on the bulk material, the discharge unit can be fitted with appropriate protective linear and sealing systems. Advantages & benefits robust design and therefore long-lasting variable feeding speed with magnetic vibrator for optimal dosing to the process bunker closure without additional barriers arrangment central below the bunker run, simple and professional installation possible upon request, in a dust-tight design to save the environment Construction The main components are: conveyor bunker shoe for product guiding inside the feeder drive elastic support elements optional: flexible sealings optional: needle or blade gate for closing Selection The s

Germany

Verified by Europages badge

AViTEQ-trough conveyor are suitable for conveying and metering of pourable bulk material up to almost any particle size. By ensuring robust and open, trough-shaped structure are particularly suitable conveyors in extreme environmental conditions, because of the easy cleaning ability, but also happy in the chemical and food industry. Advantages & benefits Wide range of applications: using magnetic vibrator drive(s) or vibrator(s) dust-proof versions available long conveying inserted through serial connection possible multiple drive possible execution in mild steel or stainless steel Construction Conveyors are characterized by their simple design. The main components are: conveyor with drive traverse drive in-/outlet pipe (covered variants) elastic support elements flexible seals Selection The sizing is dependent on: bulk material throughput required geometry possible installation mass Key figures length: up to 9,000 mm on single units, theoretically unlimited for conveyor lines

Germany

Verified by Europages badge

AViTEQ-Tubular feeders are suitable for handling and dosing of free flowing bulk material with a max. grain size of 1/3 of the tube diameter. Especially when the conveying process has to be dust free, tubular feeders are suitable through their closed design; which is needed also with high standards of hygiene and cleanliness. For feeding poisonous and hazardous substances, tube conveyors are used preferred. Advantages & benefits Wide range of applications: dustproof food suitable construction driven by magnetic vibrator/s or unbalanced motor/s long distances possible due to serial connection of feeders possible (conveyor lines) multiple drive possible (magnetic vibrators) variants available for reversing machines separate replacement of tube body or drive traverse (clamp version) made of mild steel or stainless steel Construction Tube feeders are characterized by their simple design. The main components are: feeding tube with a drive beam, either welded or connected by clamping s

Germany

Verified by Europages badge

Discharging, feeding, conveying AViTEQ reversing conveyors are used wherever bulk solids have to be conveyed and metered in an opposing direction. They are executed as reversing conveyor troughs or pipes. AViTEQ reversing conveyors are used primarily in the food and chemicals industries. Customised solutions, however, can also be realised for the recycling and raw materials industry.The technology used in the magnetic vibrator enables precise metering and exhibits no disruptive start-up or discharge behaviour. Advantages & Benefits mechanical flap and deflection systems eliminated (e.g. Y-fitting) considerably reduced installation height and hence cost saving through lower building costs reversing conveyors also act as shut-off devices the use of magnetic vibrators creates certain benefits (controllability, metering accuracy, no wearing parts etc.) reversing conveyors are available in ATEX design Construction The main components are: reversing conveyors from various materials (e

Germany

Verified by Europages badge

Discharging, feeding, conveying In many industrial production processes, sharp or hot waste bulk has to be handled (e.g. metal shavings, foundry sand or slugs). Often, it has to be transported over long distances underfloor before it will be disposed or re-processed. The use of conveyor belts often leads to difficulties due to high wear and overflowing of the floor trenches. The result: high maintenance costs, frequent cleaning of the ditches, thus interrupting production. The optimal solution for these tasks are our AViTEQ conveying guided arm troughs. Advantages & Benefits low height transport of hoarse products careful product transport longer gutter trough dust-proof design Construction The gutter trough is on trailing arms connected to a counter-vibration frame, this in turn is mounted on springs, this combination ensures that the dynamic forces are isolated up to 99 %. This allows frames and foundation are kept very small. Selection The dimensioning of the reversing convey

Germany

Verified by Europages badge

AViTEQ-Spiral conveyor are used wherever bulk solids have to be conveyed in a vertical direction. These robust spiral conveyors are suitable for conveying a host of bulk solids from various production processes. These can be fine to coarse-grained, as well as fragmentary bulk solids. Our spiral conveyors are used in the chemical, pharmaceutical and food industries, and also in the raw material industry. The use of additional fixtures enables products to be treated by thermal (cooling/heating) or technical (drying) processes. The bulk solids can be transported both upwards or downwards. Advantages & benefits energy and space-saving vertical conveying that's gentle on the material low-maintenance continuous operation easy-to-clean, hygienic design natural cooling of the bulk solid during the conveying process thanks to long dwell times bulk solids cooled either directly by air or indirectly by water through the use of double bottom or laser-welded Thermplate® bottoms as the spirals

Germany

Verified by Europages badge

AViTEQ-Strewing units are used wherever a small quantity of free-flowing material is fed to or distributed over belts, rolls or surfaces. They are executed as Strewing plates or Strewing covers. AViTEQ vibrating distributors are used primarily in the recycling, chemical and food industries. The distribution rate depends on the size of the distributor, the clearance, the load range and the conveying ability of the distributed material. The distribution rate is approx. 1 to 1,000 litres per metre of spread and per hour, depending on the distributed material and the setting. Advantages & benefits magnetic vibrator permits high distribution accuracy simple and continuous regulation of the delivery rate by varing the gap width and the load range of the magnetic vibrator simple cleaning foodstuff-approved, hygienic design Construction The main components are: vibrating distributors from various materials (e.g. stainless steel) driven by magnetic vibrators suspended by compound springs

Germany

Verified by Europages badge

AViTEQ-Small part conveyor is used everywhere fine-grained bulk materials and not too unwieldy mass parts must be delivered, conveyed, dosed, added or assigned from storage tanks. AViTEQ has led the way in producing these devices and drives in Germany on a highest level standard. Advantages and benefits High level of conveying capacity with compact dimensions operationally safe in continuous employment No influencing of the conveying speed with different loading of the user device (conduit, trough, rail). Conformity with all EC Guidelines which affect the drives available for explosion-endangered spaces (ATEX; 94/9/EG) available for 60 Hz power systems and other mains voltages Construction and operation mode Small-scale conveyor equipment is based on synchronized two-mass vibration systems which are tuned close to resonant condition. The drive part includes the elements for vibration generation, such as electromagnet and leaf spring packages. The vibration amplitude (double amplitude

Germany

Verified by Europages badge

AViTEQ parts conveyors for ordered arranging, individualizing and conveying are used in every case where mass parts have to be supplied to a magazine, a machine or to installation equipment, item for item, with a pre-determined orientation and time. Advantages and benefits High level of conveying capacity with compact dimensions operationally safe in continuous employment synchronized two-mass vibration system no influencing of the vibration characteristics through the weight of the parts being conveyed maintenance-free drive conformity with all EC Guideline which affect the drives also available for explosion-endangered spaces (Ex), as well as for 60 Hz power systems and other mains voltages Construction and operation mode AViTEQ Parts conveyors are two-mass vibration systems, which are synchronized to be close to resonant condition. The drive part includes the elements for vibration generation, such as electromagnet and leaf spring packages. The arrangement of the simple leaf sprin

Germany

Verified by Europages badge

AViTEQ Vibrating table can be used both for compression and also for loosening bulk material. Typical applications are compacting of e.g. concrete mixes or the unstick/knock out of molds. There are two different approaches: The load to be vibrated, is set loosly on the table or firmly clamped to the vibrating device. Advantages & benefits variable, can be used for different tasks easy to regulate with magnetic vibrator Construction Compact design, with attached magnetic vibrator/s or unbalanced motors below the tabletop. Selection The sizing depends on: bulk material, such as bulk density, particle shape and internal friction the properties of the container, such as height, stiffness and sidewall Key figures length: up to 4,000 mm width: up to 2,000 mm payloads: up to 3,000 kg drive: magnetic vibrator, unbalanced motor, exciter