CARONI S.P.A.

Italy

Factory icon Subcontractor

Web icon

Italy

Versatility, simplicity and safety are the main features of the TC rear mower. Designed and produced with the most up-to-date technologies and the most advanced construction systems, it is ideal for use with tractors ranging between 12 and 60 HP. Available with cutting widths of 1200, 1500, 1800 and 2350 mm, it can be used for any type of grassy area from fields to golf courses, parks to motorway grass verges, lawns to sports grounds. Four extralarge wheels always ensure a precise cut, which may range from 25 to 100 mm. Pneumatic tyres can also be supplied for all models All models are based on a support chassis consisting of a single cold-drawn block. Toughness and compactness are just two more features that apply to this adaptable, easyto-handle machine. This series consists of seven versions: TC 480NSLD, TC 590NSLD, TC 710NSLD with side grass dumping. TC 480NSRD, TC 590NSRD, TC 710NSRD and TC 910NSRD with rear grass dumping. Other features are its easy-to-adjust cutting height, which can be altered simply by shifting the spacers mounted on the fork shaft, its 3rd anchoring point, which €œfloats€? to allow the machine to follow the contour of the ground, and its easily-regulated belt tension, which simply requires the adjustment of a single screw. Standard hitches mounted on the mower mean that it can be used with any type of tractor. The first five models have seven easilyaccessible greasing points, whereas the TC 910NSRD, which is fitted with 5 trimming blades, has nine. This version is ideal for mowing vast areas and ensures a particularly high quality cut due to the fact that its bottom tractor hitching points have a floating system with maximum oscillation of 45 degrees. The mower can therefore follow all the ups and downs in the grassy areas to give aesthetically perfect results. Grass expulsion is made easier by the use of a rear outlet, which is fitted with a safety deflector. Mowers: Caroni by Kubota Mulching and Recycle System THE KIT THAT SHREDS THE GRASS AND CUTS DOWN ON TIME AND MONEY. THE EXCLUSIVE MULCHING AND RECYCLE KIT FROM CARONI MEANS THAT YOU CAN SHRED LEAVES AND GRASS WHILE YOU ARE CUTTING THE LAWN. THE KIT CAN BE FITTED ON ALL OUR MOWERS SO THAT YOU CAN SAVE TIME AND SPEND LESS ON UPKEEP. The Mulching and Recycle System comes in a wide variety of different versions to match Caroni entire range of rear, side and multiple rotary mowers. The kit contains a set of special steel shredding blades and a steel case, which are easily fixed to any of our mowers. The mower blades mow the grass finely and evenly because they keep so close to the contours of the ground. At the same time the special blades, which are mounted on the same axle, shred the newly mown grass and and/or leaves mixed together inside the case. The mulched grass is then spread over the ground. There are no problems with blocked mower wheels, because a special scraper makes sure that no lumps accumulate. One of the best things about the Mulching and Recycle System is that it cuts down on the time and money spent on picking up, moving and disposing of all those grass cuttings. Another plus is that the shredded grass and leaves make wonderful natural compost €“ not too wet, not too dry - which is recycled into the biological chain without doing any damage. In addition, as all our mowers are fitted with a safety deflector, there is no risk of any gravel or other small objects being spread on the ground with the mulch.

Request for a quote

Italy

The F series front mower, which is available with cutting widths of 1200, 1500, 1800 and 2350 mm, dumping side or rear position, can also be used with 12 to 60 HP tractors. This mower is available in 21 versions with a power takeoff of either 540 or 1000 rpm, although a 2000 rpm PTO can be requested for models F12 - F15 - F18 - F24. All 21 versions are fitted with axially adjustable hitches so that the mower can be attached to any tractor that has a front hydraulic lift system. The same features of versatility, simplicity, safety, toughness and ease present in the TC series also apply to the F series mowers. Front Mower with Turbine Mulching and Recycle System THE KIT THAT SHREDS THE GRASS AND CUTS DOWN ON TIME AND MONEY. THE EXCLUSIVE MULCHING AND RECYCLE KIT FROM CARONI MEANS THAT YOU CAN SHRED LEAVES AND GRASS WHILE YOU ARE CUTTING THE LAWN. THE KIT CAN BE FITTED ON ALL OUR MOWERS SO THAT YOU CAN SAVE TIME AND SPEND LESS ON UPKEEP. The Mulching and Recycle System comes in a wide variety of different versions to match Caroni entire range of rear, side and multiple rotary mowers. The kit contains a set of special steel shredding blades and a steel case, which are easily fixed to any of our mowers. The mower blades mow the grass finely and evenly because they keep so close to the contours of the ground. At the same time the special blades, which are mounted on the same axle, shred the newly mown grass and and/or leaves mixed together inside the case. The mulched grass is then spread over the ground. There are no problems with blocked mower wheels, because a special scraper makes sure that no lumps accumulate. One of the best things about the Mulching and Recycle System is that it cuts down on the time and money spent on picking up, moving and disposing of all those grass cuttings. Another plus is that the shredded grass and leaves make wonderful natural compost not too wet, not too dry - which is recycled into the biological chain without doing any damage. In addition, as all our mowers are fitted with a safety deflector, there is no risk of any gravel or other small objects being spread on the ground with the mulch.

Request for a quote

Italy

Even better performance SIMPLER MAINTENANCE The MULTICUT has been awarded the European Community certificate of approval and complies fully with EC Machine Directives. Maintenance problems are trimmed to a minimum as the MULTICUT requires no more than the standard cleaning and checking operations for a traditional lawnmower. Since the MULTICUT can be folded each part of the device is easy to access, making maintenance even simpler. Before carrying out maintenance operations, always stop the tractor and release the universal joint; maintenance instructions are set out in the Operating, Maintenance and Safety Manual� which accompanies each Caroni device. MULTICUT: INCREASED PRODUCTIVITY The MULTICUT is manufactured using state-of-the-art design criteria and highly modern construction techniques. The device consists of three rear lawnmowers with vertical axes, of the TC series - width 1200, 1500, 1800 and 2400 mm - mounted on a single chassis which can be connected up to any tractor: from 30 up to 75 HP. A perfect combination of mechanical, hydraulic and production features which, at speeds of 10/15 km/h, reduces the number of cutting operations, work times and labour costs while making each lawnmower three times as efficient. Reduced operating times also result in lower fuel consumption and less pollution from the tractor. All these features are combined in a device which weighs from 950 up to 1300 kg. With an operating range from 3.60 up to 5.65 m, MULTICUT increases productivity and cuts the time and costs of maintaining sports fields, parks, fairways and large grassed areas in general, sectors for which it was specially designed. EXECELLENT PERFORMANCE ON ANY SURFACE Drive is transmitted by means of a universal joint to a fourwaybox and then by means of three more universal jointsto the three cutting devices which operate independently. Each lawnmower in anchored to the supporting structure individually by means of oscillating arms and is equipped with “extra wide� wheels. Since the lawnmowers operate independently they are able to follow the contours and irregular features of the land, cutting the grass evenly and accurately to heights of between 25 and 100 mm. EASY TO TRANSPORT The MULTICUT has a three cylinder hydraulic system designed to fold the three lawnmowers vertically when work is complete, reducing the width of the device to just 2.00 m - 2.20 m - 2.40 m, depending on the model. This makes it extremely easy to transport the MULTICUT by road. Two extra wide tyres and a hydraulic stop on each device increase safety and stability. Mulching and Recycle System THE KIT THAT SHREDS THE GRASS AND CUTS DOWN ON TIME AND MONEY. THE EXCLUSIVE MULCHING AND RECYCLE KIT FROM CARONI MEANS THAT YOU CAN SHRED LEAVES AND GRASS WHILE YOU ARE CUTTING THE LAWN. THE KIT CAN BE FITTED ON ALL OUR MOWERS SO THAT YOU CAN SAVE TIME AND SPEND LESS ON UPKEEP. The Mulching and Recycle System comes in a wide variety of different versions to match Caroni entire range of rear, side and multiple rotary mowers. The kit contains a set of special steel shredding blades and a steel case, which are easily fixed to any of our mowers. The mower blades mow the grass finely and evenly because they keep so close to the contours of the ground. At the same time the special blades, which are mounted on the same axle, shred the newly mown grass and and/or leaves mixed together inside the case. The mulched grass is then spread over the ground. There are no problems with blocked mower wheels, because a special scraper makes sure that no lumps accumulate. One of the best things about the Mulching and Recycle System is that it cuts down on the time and money spent on picking up, moving and disposing of all those grass cuttings. Another plus is that the shredded grass and leaves make wonderful natural compost – not too wet, not too dry - which is recycled into the biological chain without doing any damage. In addition, as all our mowers are fitted with a safety deflector, there is no risk of any gravel or other small objects being spread on the ground with the mulch.

Request for a quote

Italy

Patent pending n. 01830710.8. Double productivity One machine does it all! Mow & Carry® is the mower that cuts, sucks up, gathers and dumps grass directly in the trailer of a vehicle. Compact and light, fast and safe with any tractor, Mow & Carry® doubles productivity while halving time and costs. CUT AND GATHER IN A SINGLE PASS While it mows, Mow & Carry® sucks up and gathers the grass in a container fitted on top of the mower: all with a single machine and in a single pass! A suction turbine system on the side outlet of the machine – which is driven by the shaft of one of the blades – coveys the cut grass into the collecting container, which then dumps the grass in the trailer of a vehicle. HANDY DUMPING SYSTEM When the container is full, simply operate the hydraulic distributor of the tractor to dump the grass directly in the trailer of a vehicle or on the disposal site. The container is lifted, moved and tipped thanks to a lever-system mechanism operated by three synchronized hydraulic cylinders. The container is dumped 140/180 cm from ground level. HALVED TIME AND COSTS By combining cutting and gathering operations, Mow & Carry® doubles cutting speed, effectively halving labour costs and saving on the purchase of machinery. In addition, fuel consumption is lowered because there is a step less and because of the contained weight of the mower. Naturally, lower fuel consumption also means lower polluting emissions. WHEN SAFETY AND LIGHTNESS GO HAND IN HAND The TR150-600L and TR180-750L mowers only weigh 941 and 1032 lbs, respectively. The light plastic grass container maximizes manoeuvrability and visibility from the tractor. Particular attention was paid to the setup during dumping to guarantee the perfect stability of the tractor. REVOLUTIONIZING TRADITIONAL STRENGTHS With its revolutionary design, Mow & Carry® also offers all the advantages of Caroni’s traditional quality. Particularly suitable for large and medium surfaces – sports fields, parks, golf courses, etc. – it can be fitted onto any tractor with a simple fastening operation. A clean cut is assured by the 150 or 180 cm long mower, which is equipped with three blades with a vertical shaft and side dumping. Eight swivel wheels make progress on a grassy area easy and light. Eight swivel wheels make progress on a grassy area easy and light. To adjust the cutting height, simply move the spacers mounted on the fork shaft; the third “floating” point and the lower tractor fastening points, which were designed to allow an oscillation of 45°at most, enable the machine to follow the contour of the ground perfectly.

Request for a quote

The company CARONI S.P.A., is a Subcontractor, founded in 1954, which operates in the Sheets and bands - non-ferrous metal industry. It also operates in the Sheet Metal & Tubes, and Boilerwork industries. It is based in Cuneo, Italy.

Other companies in the same industry:

Domain icon Subcontractor

CARONI S.P.A.

46 VIA CASTELLETTO STURA

12100 Cuneo - Italy

VAT No.
Contact

Company info

Organisation

  • Year established
    1954
  • pages.epage-home.site-status
    Registered office
  • Main activity
    Subcontractor

Business info

Trading areas

  • Check Circle Outline icon International

Activities of CARONI S.P.A.

  • Sheets and bands - non-ferrous metal
  • Sheet Metal & Tubes
  • Boilerwork
Office Building Outline icon
A page for your business
Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free