CARONI S.P.A.

Italy

Factory icon Subcontractor

Web icon
13 Products

Italy

Versatility, simplicity and safety are the main features of the TC rear mower. Designed and produced with the most up-to-date technologies and the most advanced construction systems, it is ideal for use with tractors ranging between 12 and 60 HP. Available with cutting widths of 1200, 1500, 1800 and 2350 mm, it can be used for any type of grassy area from fields to golf courses, parks to motorway grass verges, lawns to sports grounds. Four extralarge wheels always ensure a precise cut, which may range from 25 to 100 mm. Pneumatic tyres can also be supplied for all models All models are based on a support chassis consisting of a single cold-drawn block. Toughness and compactness are just two more features that apply to this adaptable, easyto-handle machine. This series consists of seven versions: TC 480NSLD, TC 590NSLD, TC 710NSLD with side grass dumping. TC 480NSRD, TC 590NSRD, TC 710NSRD and TC 910NSRD with rear grass dumping. Other features are its easy-to-adjust cutting height, which can be altered simply by shifting the spacers mounted on the fork shaft, its 3rd anchoring point, which €œfloats€? to allow the machine to follow the contour of the ground, and its easily-regulated belt tension, which simply requires the adjustment of a single screw. Standard hitches mounted on the mower mean that it can be used with any type of tractor. The first five models have seven easilyaccessible greasing points, whereas the TC 910NSRD, which is fitted with 5 trimming blades, has nine. This version is ideal for mowing vast areas and ensures a particularly high quality cut due to the fact that its bottom tractor hitching points have a floating system with maximum oscillation of 45 degrees. The mower can therefore follow all the ups and downs in the grassy areas to give aesthetically perfect results. Grass expulsion is made easier by the use of a rear outlet, which is fitted with a safety deflector. Mowers: Caroni by Kubota Mulching and Recycle System THE KIT THAT SHREDS THE GRASS AND CUTS DOWN ON TIME AND MONEY. THE EXCLUSIVE MULCHING AND RECYCLE KIT FROM CARONI MEANS THAT YOU CAN SHRED LEAVES AND GRASS WHILE YOU ARE CUTTING THE LAWN. THE KIT CAN BE FITTED ON ALL OUR MOWERS SO THAT YOU CAN SAVE TIME AND SPEND LESS ON UPKEEP. The Mulching and Recycle System comes in a wide variety of different versions to match Caroni entire range of rear, side and multiple rotary mowers. The kit contains a set of special steel shredding blades and a steel case, which are easily fixed to any of our mowers. The mower blades mow the grass finely and evenly because they keep so close to the contours of the ground. At the same time the special blades, which are mounted on the same axle, shred the newly mown grass and and/or leaves mixed together inside the case. The mulched grass is then spread over the ground. There are no problems with blocked mower wheels, because a special scraper makes sure that no lumps accumulate. One of the best things about the Mulching and Recycle System is that it cuts down on the time and money spent on picking up, moving and disposing of all those grass cuttings. Another plus is that the shredded grass and leaves make wonderful natural compost €“ not too wet, not too dry - which is recycled into the biological chain without doing any damage. In addition, as all our mowers are fitted with a safety deflector, there is no risk of any gravel or other small objects being spread on the ground with the mulch.

Request for a quote

Italy

The F series front mower, which is available with cutting widths of 1200, 1500, 1800 and 2350 mm, dumping side or rear position, can also be used with 12 to 60 HP tractors. This mower is available in 21 versions with a power takeoff of either 540 or 1000 rpm, although a 2000 rpm PTO can be requested for models F12 - F15 - F18 - F24. All 21 versions are fitted with axially adjustable hitches so that the mower can be attached to any tractor that has a front hydraulic lift system. The same features of versatility, simplicity, safety, toughness and ease present in the TC series also apply to the F series mowers. Front Mower with Turbine Mulching and Recycle System THE KIT THAT SHREDS THE GRASS AND CUTS DOWN ON TIME AND MONEY. THE EXCLUSIVE MULCHING AND RECYCLE KIT FROM CARONI MEANS THAT YOU CAN SHRED LEAVES AND GRASS WHILE YOU ARE CUTTING THE LAWN. THE KIT CAN BE FITTED ON ALL OUR MOWERS SO THAT YOU CAN SAVE TIME AND SPEND LESS ON UPKEEP. The Mulching and Recycle System comes in a wide variety of different versions to match Caroni entire range of rear, side and multiple rotary mowers. The kit contains a set of special steel shredding blades and a steel case, which are easily fixed to any of our mowers. The mower blades mow the grass finely and evenly because they keep so close to the contours of the ground. At the same time the special blades, which are mounted on the same axle, shred the newly mown grass and and/or leaves mixed together inside the case. The mulched grass is then spread over the ground. There are no problems with blocked mower wheels, because a special scraper makes sure that no lumps accumulate. One of the best things about the Mulching and Recycle System is that it cuts down on the time and money spent on picking up, moving and disposing of all those grass cuttings. Another plus is that the shredded grass and leaves make wonderful natural compost not too wet, not too dry - which is recycled into the biological chain without doing any damage. In addition, as all our mowers are fitted with a safety deflector, there is no risk of any gravel or other small objects being spread on the ground with the mulch.

Request for a quote

Italy

Even better performance SIMPLER MAINTENANCE The MULTICUT has been awarded the European Community certificate of approval and complies fully with EC Machine Directives. Maintenance problems are trimmed to a minimum as the MULTICUT requires no more than the standard cleaning and checking operations for a traditional lawnmower. Since the MULTICUT can be folded each part of the device is easy to access, making maintenance even simpler. Before carrying out maintenance operations, always stop the tractor and release the universal joint; maintenance instructions are set out in the Operating, Maintenance and Safety Manual� which accompanies each Caroni device. MULTICUT: INCREASED PRODUCTIVITY The MULTICUT is manufactured using state-of-the-art design criteria and highly modern construction techniques. The device consists of three rear lawnmowers with vertical axes, of the TC series - width 1200, 1500, 1800 and 2400 mm - mounted on a single chassis which can be connected up to any tractor: from 30 up to 75 HP. A perfect combination of mechanical, hydraulic and production features which, at speeds of 10/15 km/h, reduces the number of cutting operations, work times and labour costs while making each lawnmower three times as efficient. Reduced operating times also result in lower fuel consumption and less pollution from the tractor. All these features are combined in a device which weighs from 950 up to 1300 kg. With an operating range from 3.60 up to 5.65 m, MULTICUT increases productivity and cuts the time and costs of maintaining sports fields, parks, fairways and large grassed areas in general, sectors for which it was specially designed. EXECELLENT PERFORMANCE ON ANY SURFACE Drive is transmitted by means of a universal joint to a fourwaybox and then by means of three more universal jointsto the three cutting devices which operate independently. Each lawnmower in anchored to the supporting structure individually by means of oscillating arms and is equipped with “extra wide� wheels. Since the lawnmowers operate independently they are able to follow the contours and irregular features of the land, cutting the grass evenly and accurately to heights of between 25 and 100 mm. EASY TO TRANSPORT The MULTICUT has a three cylinder hydraulic system designed to fold the three lawnmowers vertically when work is complete, reducing the width of the device to just 2.00 m - 2.20 m - 2.40 m, depending on the model. This makes it extremely easy to transport the MULTICUT by road. Two extra wide tyres and a hydraulic stop on each device increase safety and stability. Mulching and Recycle System THE KIT THAT SHREDS THE GRASS AND CUTS DOWN ON TIME AND MONEY. THE EXCLUSIVE MULCHING AND RECYCLE KIT FROM CARONI MEANS THAT YOU CAN SHRED LEAVES AND GRASS WHILE YOU ARE CUTTING THE LAWN. THE KIT CAN BE FITTED ON ALL OUR MOWERS SO THAT YOU CAN SAVE TIME AND SPEND LESS ON UPKEEP. The Mulching and Recycle System comes in a wide variety of different versions to match Caroni entire range of rear, side and multiple rotary mowers. The kit contains a set of special steel shredding blades and a steel case, which are easily fixed to any of our mowers. The mower blades mow the grass finely and evenly because they keep so close to the contours of the ground. At the same time the special blades, which are mounted on the same axle, shred the newly mown grass and and/or leaves mixed together inside the case. The mulched grass is then spread over the ground. There are no problems with blocked mower wheels, because a special scraper makes sure that no lumps accumulate. One of the best things about the Mulching and Recycle System is that it cuts down on the time and money spent on picking up, moving and disposing of all those grass cuttings. Another plus is that the shredded grass and leaves make wonderful natural compost – not too wet, not too dry - which is recycled into the biological chain without doing any damage. In addition, as all our mowers are fitted with a safety deflector, there is no risk of any gravel or other small objects being spread on the ground with the mulch.

Request for a quote

Italy

Patent pending n. 01830710.8. Double productivity One machine does it all! Mow & Carry® is the mower that cuts, sucks up, gathers and dumps grass directly in the trailer of a vehicle. Compact and light, fast and safe with any tractor, Mow & Carry® doubles productivity while halving time and costs. CUT AND GATHER IN A SINGLE PASS While it mows, Mow & Carry® sucks up and gathers the grass in a container fitted on top of the mower: all with a single machine and in a single pass! A suction turbine system on the side outlet of the machine – which is driven by the shaft of one of the blades – coveys the cut grass into the collecting container, which then dumps the grass in the trailer of a vehicle. HANDY DUMPING SYSTEM When the container is full, simply operate the hydraulic distributor of the tractor to dump the grass directly in the trailer of a vehicle or on the disposal site. The container is lifted, moved and tipped thanks to a lever-system mechanism operated by three synchronized hydraulic cylinders. The container is dumped 140/180 cm from ground level. HALVED TIME AND COSTS By combining cutting and gathering operations, Mow & Carry® doubles cutting speed, effectively halving labour costs and saving on the purchase of machinery. In addition, fuel consumption is lowered because there is a step less and because of the contained weight of the mower. Naturally, lower fuel consumption also means lower polluting emissions. WHEN SAFETY AND LIGHTNESS GO HAND IN HAND The TR150-600L and TR180-750L mowers only weigh 941 and 1032 lbs, respectively. The light plastic grass container maximizes manoeuvrability and visibility from the tractor. Particular attention was paid to the setup during dumping to guarantee the perfect stability of the tractor. REVOLUTIONIZING TRADITIONAL STRENGTHS With its revolutionary design, Mow & Carry® also offers all the advantages of Caroni’s traditional quality. Particularly suitable for large and medium surfaces – sports fields, parks, golf courses, etc. – it can be fitted onto any tractor with a simple fastening operation. A clean cut is assured by the 150 or 180 cm long mower, which is equipped with three blades with a vertical shaft and side dumping. Eight swivel wheels make progress on a grassy area easy and light. Eight swivel wheels make progress on a grassy area easy and light. To adjust the cutting height, simply move the spacers mounted on the fork shaft; the third “floating” point and the lower tractor fastening points, which were designed to allow an oscillation of 45°at most, enable the machine to follow the contour of the ground perfectly.

Request for a quote

Italy

New TC620XS Series: DUAL PERSONALITY The TC620XS mowers offer dual functionality in a single machine, with just a few, simple moves being all it takes to switch between two different kinds of cut: classic grass and brushwood mowing, and mulch-mowing. This exclusive feature is catered for by the dual edge blade and inversion of the mower feed: in fact, you only need to rotate the drive unit and move the attachment of the third point to use the TC620XS in one direction or the other, depending on the type of cut you want. MULCHING-CUTTING IN TWO MOVES To set up the mower in Mulching mode, the drive unit is turned 130° and the third point is moved to the opposite side. This locks the deflector in position, and completely closes the body so that the grass is shredded by the twin-edged blade. There are many advantages with this type of mowing: the grass is cut very finely, and instead of needing to be collected and disposed of, it becomes part of an organic soil recycling process, saving not only time and money, but also the need for fertilizer and water. A HIGHLY VERSATILE RANGE ll as front - with 540, 1000 and 2000 rpm PTOs - and rear linkage, the TC620XS is available with a hydraulic motor. With an attachment that can be adapted to most applications, the hydraulic motor version can be fitted to any tractor, operating machine or hydraulic arm without a PTO by making just a few modifications, such as fitting a set of 5 rollers instead of - or along with - the 4 wheels.

Request for a quote

Italy

FRONT AND REAR MOWERS SUITABLE FOR ATV/QUAD Agile, robust and safe on any kind of ground, the TC Special series of Caroni Mowers are the ideal partners of ATV/QUAD models. Designed and realized according to the most recent construction technologies and systems, both in front and rear version, they can guarantee a clean and precise cut, 25 to 100mm (1" to 4" inch) on the whole working width of 1200 or 1500 mm (48" or 59" inch). Other versions can also be realized: with a 1800 mm (71" inch) working width and rear or side unloading, or with a 2400 mm (95" inch) working width with rear unloading. Available in eight models with side or rear unloading and manual or electric start-up, they are equipped with a monobloc self-supporting cold-drawn frame that makes them especially robust. Their reduced weight makes all manoeuvres easier. Easy cutting height adjustment: simply by shifting the spacers mounted on the fork axle. The drawbar is floating to let the machine easily follow the ground unevenness. Furthermore, various positions are available in order to shift the machine as to tractor. Seven greasing points are available, easy to reach. The belt tension is obtained by adjusting the screw mounted under the motor and can be checked easily, too. Briggs & Stratton engines 11.5 HP are mounted on the standard versions of the TC SPECIAL machines for ATV/QUAD models, but other engines fromthe best manufacturers in the market are also available. Furthermore, various accessories are available in order to complete the machine equipment: from a mulching kit to inflatable wheels, to a centralized greasing kit. Mulching and Recycle System THE KIT THAT SHREDS THE GRASS AND CUTS DOWN ON TIME AND MONEY. THE EXCLUSIVE MULCHING AND RECYCLE KIT FROM CARONI MEANS THAT YOU CAN SHRED LEAVES AND GRASS WHILE YOU ARE CUTTING THE LAWN. THE KIT CAN BE FITTED ON ALL OUR MOWERS SO THAT YOU CAN SAVE TIME AND SPEND LESS ON UPKEEP. The Mulching and Recycle System comes in a wide variety of different versions to match Caroni entire range of rear, side and multiple rotary mowers. The kit contains a set of special steel shredding blades and a steel case, which are easily fixed to any of our mowers. The mower blades mow the grass finely and evenly because they keep so close to the contours of the ground. At the same time the special blades, which are mounted on the same axle, shred the newly mown grass and and/or leaves mixed together inside the case. The mulched grass is then spread over the ground. There are no problems with blocked mower wheels, because a special scraper makes sure that no lumps accumulate. One of the best things about the Mulching and Recycle System is that it cuts down on the time and money spent on picking up, moving and disposing of all those grass cuttings. Another plus is that the shredded grass and leaves make wonderful natural compost “ not too wet, not too dry - which is recycled into the biological chain without doing any damage. In addition, as all our mowers are fitted with a safety deflector, there is no risk of any gravel or other small objects being spread on the ground with the mulch.

Request for a quote

Italy

The FL series of light rotary tillers, which can be attached to small and medium-sized tractors with 15 to 40 HP, is ideal for use in orchards, vineyards and market gardens. The FM series of tough compact medium-sized rotary tillers, suitable for tractors ranging from 35 to 60 HP, is ideal for small/medium-sized farms. These are relatively light machines which, despite the fact they do not require a great deal of power, are mechanically tough as a result of the high quality materials used in their making. Designed with the most up-to-date technology to meet the requirements of ever more advanced farming techniques, these machines combine versatility and compactness with extremely easy handling, which means they are at home on any type of terrain. The 3rd floating point and the adjustable hitches are always centered on the tractor axis but allow the tiller to be moved 16 cm to the right. This important innovation has been employed on the 1100 - 1200 -1300 and 1400 versions of the FL series, and on all the FM models. The chain drive, positioned at the side of the tiller, is housed in an oil bath and has a manual tension regulator. The disk rotor has 6 hoes per disk. Side skids used to adjust the tilling depth are standard fittings. The standard universal joint can be supplied with a clutch or bolt limiting device upon request. The hitches, which are also standard fittings, allow these tillers to be used with any type of tractor. Rotary Tillers: Caroni by Kubota

Request for a quote

Italy

Tough and simple to use The tough and simple-to-use TL series, available in versions TL0900 - TL1200 and TL1500, is specialized in cutting grass on any type of terrain. Three rotors can be used: type A for a normal cut, and type F, fitted with twice the number of blades with respect to type A, to give a more accurate and closer cut, and type P, which thanks to the horizontal cutting edge of the blade permits an excellent finish cutting of the grassland. These mowers have fixed tractor hitches, and their drive is provided by 2 trapezoidal belts with automatic spring-adjusted tensioner. TM 1300 - TM 1600 TM 1900, which can also be mounted with an additional rotor with respect to the TL series. This B type rotor is ideal for cutting down bushes and can therefore be used for clearing undergrowth, uncultivated fields, motorway verges. It can also be used for stalk shredding after crop harvesting. The TM series differs from the TL series in that its hitches and 3rd point have two different positions, and three belts are used for the drive, which is decidedly more substantial in the TM series. Both series, however, guarantee the correct cutting height by using an adjustable rear roller and a scraper, which keeps the mower clean. A set of side skids can be supplied upon request to suit the various different types of terrain. Both the TM and TL series mount steel protections as a standard to safeguard the driver when the rotor is in operation. The hitches, which are also standard fittings, allow the mower to be used with any type of tractor. HYDRAULIC SHIFT KIT FOR FLAIL MOWERS, SERIES TL AND TM It can be applied to all models of TL and TM series, 1200 to 1900 mm long. This hydraulic shift kit is an actual optional accessory to be ordered with the machine or separately. The kit makes the machine particularly agile on any kind of ground for easy mowing, even in areas difficult to reach. It permits to improve the performance of your flail mower with no need for purchasing a new machine equipped with a specific shift frame. SHIFTING DIAGRAM

Request for a quote

Italy

Mechanical and hydraulic presses up to 1500 tons superintend all types of cold machining of sheet metal 0,2 to 5/6 mm thick: from shearing to deep drawing, from presswork to coining. Automatic machines, robots and highly specialized technicians perform projection tack welding, spot welding and submerged arc welding operations. Painting takes place using a brand new highly advanced and fully automatic painting system.

Request for a quote

Italy

You never forget your roots. When it was first founded in 1954, the company’s focus was mechanical machining: even today it maintains an obsession with the perfection of detail and craftsman-like care, though numerical control machinery is now used alongside conventional machines. Mechanical chip removal is performed with the aid of milling machines, CNC lathes and machining units, grinders, punching machines, broaching machines, boring machines, tapping machines, etc. The machines work with materials such as spheroidal cast iron, steel, aluminum and sheet metal assemblies.

Request for a quote

Domain icon Subcontractor

CARONI S.P.A.

46 VIA CASTELLETTO STURA

12100 Cuneo - Italy

VAT No.
Contact
Office Building Outline icon
A page for your business
Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free