Belarus
Manufacturer/ Producer
Belarus
InfraLine-100 series heaters are equipped with polished stainless-steel reflector that increases the heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 600°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.
Request for a quoteBelarus
InfraLine-100 series heaters are equipped with polished stainless-steel reflector that increases the heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 600°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.
Request for a quoteBelarus
InfraLine-100 series heaters are equipped with polished stainless-steel reflector that increases the heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 600°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.
Request for a quoteBelarus
InfraLine-200 series heaters are equipped with a special polished stainless-steel reflector with higher thermal insulation for maximum heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 700°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.
Request for a quoteBelarus
InfraLine-200 series heaters are equipped with a special polished stainless-steel reflector with higher thermal insulation for maximum heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 700°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.
Request for a quoteBelarus
InfraLine-200 series heaters are equipped with a special polished stainless-steel reflector with higher thermal insulation for maximum heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 700°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.
Request for a quoteBelarus
QSun-WA 610W is equipped with a control unit that allows you to set the desired temperature. It is easy to install on a wall or any other vertical surface using only 4 screws. Effective heating area - 10-18 m² depending on the heat insulation of the room. Customize your QSun-W panel with a graphic design of your choice. Wall mounted infrared heating panels Qsun-WA are proven to have one of the highest efficiency rates reducing heating costs. Clean Dust Free Heat - unlike forced-air systems, infrared heating panels don't blow dust, pollen, hair, or other allergens. We recommend installing the QSun-WA on the walls in places where there are no obstacles to the spread of infrared heating rays (tables, chairs, etc.) at a height of at least 100 mm from the floor. It is recommended to install this heater under the window. In this case, it will also perform the function of a "heat curtain" and prevent the penetration of cold air through the window into the room.
Request for a quoteBelarus
QSun-W 660W is easy to install on a wall or any other vertical surface using only 4 screws. Effective heating area - 10-18 m² depending on the heat insulation of the room. Customize your QSun-W panel with a graphic design of your choice. Wall mounted infrared heating panels QSun-W are proven to have one of the highest efficiency rates reducing heating costs. Clean Dust Free Heat - unlike forced-air systems, infrared heating panels don't blow dust, pollen, hair, or other allergens. We recommend installing the QSun-W on the walls in places where there are no obstacles to the spread of infrared heating rays (tables, chairs, etc.) at a height of at least 100 mm from the floor. It is recommended to install this heater under the window. In this case, it will also perform the function of a "heat curtain" and prevent the penetration of cold air through the window into the room.
Request for a quoteBelarus
Plinth Infrared Heaters feature stylish design, they are slim, but you’ll be surprised by the amount of warmth they can generate! Designed to be mounted at the bottom of the wall, just above the floor, which makes them barely visible. Made of powder-coated sheet metal, it has a very lightweight (2kg) and very slim design (15 mm thick). If you need more heat in the room, multiple plinth heating panels can be connected in a parallel chain (up to 15 heaters in one chain). For this purpose, a terminal block is provided on the rear side of the heater. Key Advantages include: don’t burn oxygen, have zero maintenance fee, save up to 40% energy compared to other models, quickly warms up surrounding objects, silent during operation, don't blow dust, pollen, or other allergens. Effective heating area is 3-5 m².
Request for a quoteBelarus
QSun-C Ceiling Mounted Infrared Heater is adapted for installation to the "ARMSTRONG" type suspended ceiling grid or can be mounted at any height above the floor level using the included mounts. QSun-C saves your room space and electricity costs by delivering sun-like warmth directly to the people without heating the surrounding air, and not disturbing dust. Only 15 mm thick ceiling heating panels look elegant and aesthetically pleasing, seamlessly blending into any interior. Effective heating area - 8-12 m².
Request for a quoteGermany
Temperature measuring strips, for example, are stuck to components that heat up under load. The measuring strip shows the maximum temperature reached after the component has cooled down. This means that the maximum temperature of the component can be read off quickly and inexpensively.
Request for a quoteGermany
Technichal data: Accuracy ± 3°C at -50°C to 20°C ± 1% or 1°C at 20°C to 500°C ± 1.5% or 2°C at 500°C to 1,000°C ± 2% at 1,000°C to 1,850°C Reproducibility ± 1.5°C at -50°C to 20°C ± 0.5% or ± 0.5°C at 20 °C to 1,000 °C ± 1% at 1,000°C to 1,850 °C Optical resolution (D:S): 75:1 Smallest measurement spot: 18 mm @ 1,350 mm Temperature range: -50°C to +1,850°C Reaction time: < 150 ms Spectral sensivity: 8 ~ 14 µm Laser class: Klasse 2 (II) Wavelength: 630 ~ 670 nm Power: <1 mW Display: LCD, monochrome Temperature range (contact-temperature sensor): 50°C to +300°C Accuracy (contact-temperature sensor): ±1,5% or ± 3°C Reproducibility (contact-temperature sensor): ± 1,5% Operating conditions (operation): 0°C to 50°C, 10% to 90% RH Operating conditions (storage): -10°C to 60°C, < 80% RH (non-condensing) Power supply (internal): 9 V IEC 6LR61 Power supply (external): via USB
Request for a quoteItaly
Most industrial process temperature control units work through the pressure exerted on the water of the process utilities: this is convenient in most “standard” cases, given the higher efficiency developed by the system. However, some critical process issues can make this type of operation difficult: this is the case of machines that leak fluids, or with leakage, and that it is not convenient to maintain on the spot. In such cases, it is therefore useful to work with a vacuum temperature control unit, which sucks in utility water. FTT PD water thermoregulators are flexible and effective systems, which can work under either pressure or vacuum depending on the peculiarities of the system. Any fluid losses are therefore minimized during operations. A simplicity of operation is also ensured by the touch-screen panel, also found on other Frigofluid temperature controllers. Models with an increased pump are also available for users characterized by high pressure drops.
Request for a quoteItaly
Often the main critical issue for molding industries is not achieving the temperatures needed for their processes, but maintaining them over time. Hence the usefulness of temperature control units that not only send the fluids needed to do the job up to temperature, but are capable of subsequent self-tuning. This is the way FTT DC water temperature controllers operate, which wrap direct cooling to stabilize fluid grades after the desired temperature has been reached. This requires integration with a source of cooled water: a simple well or a chiller or cooling system (chiller or dry cooler). Our engineers are available to determine which cooling solution is the most effective and economical. Not only that. The management of these successive heating-cooling steps is easier when done with a touch screen: a feature with which FTT DC temperature controllers are equipped. Units in the FTT category are specially designed to condition molds.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.