Belarus
Manufacturer/ Producer
Belarus
QSun-M1 (800W) is good for 5-12m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!
Request for a quoteBelarus
QSun-M2 (1600W) is good for 8-15m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!
Request for a quoteBelarus
QSun-M3 (2400W) is the most powerful heater in ceramic M-series, it can cover up to 10-20m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!
Request for a quoteBelarus
QSun-A1 (800W) is good for 5-12m2 depending on the insulation level. Equipped with a remote control. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!
Request for a quoteBelarus
QSun-A2 (1600W) is good for 8-15m2 depending on the insulation level. Equipped with a remote control. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!
Request for a quoteBelarus
QSun-M3 (2400W) is the most powerful heater in ceramic M-series, it can cover up to 10-20m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!
Request for a quoteBelarus
Ceramic Force EIP-1 (380V) infrared heaters for industrial use are designed for indoor and outdoor heating applications to deliver maximum performance and cover large spaces. They do an excellent job at factories, warehouses, workshops, stadiums, big garages and pavilions. 3 models are available with wattages: 3900, 4800 and 6000W. This power is enough to cover 20-60m2 depending on thermal insulation and surrounding temperature. Parabolic arrangement of infrared emitter rows allows you to create a heating zone with a volumetric 55-95 degrees angle. Thus, minimizing energy losses from heat dissipation outside the zone of directed infrared rays. EIP Heating panels can be mounted on a wall or a ceiling. Radiating surface angle can be set from 0 to 60 degrees. Each electric heater has a thermal sensor connected to a three-phase electric power thermostat, which controls the heating process according to the preset temperature.
Request for a quoteBelarus
Ceramic Force EIP-2 (380V) infrared heaters for industrial use are designed for indoor and outdoor heating applications to deliver maximum performance and cover large spaces. They do an excellent job at factories, warehouses, workshops, stadiums, big garages and pavilions. 3 models are available with wattages: 5850, 7200 and 9000W. This power is enough to cover 40-100m2 depending on thermal insulation and surrounding temperature. Parabolic arrangement of infrared emitter rows allows you to create a heating zone with a volumetric 55-95 degrees angle. Thus, minimizing energy losses from heat dissipation outside the zone of directed infrared rays. EIP Heating panels can be mounted on a wall or a ceiling. Radiating surface angle can be set from 0 to 60 degrees. Each electric heater has a thermal sensor connected to a three-phase electric power thermostat, which controls the heating process according to the preset temperature.
Request for a quoteBelarus
EUROLINIA Industrial Infrared Ovens are designed for high-precision surface heating of various materials and products by directional infrared heat. Precise temperature control, sperate heating zones, custom software for your application. Optionally ovens can be equipped with protective steel curtains for instant heating termination or inertia-free start/stop system. Maximum temperature of the infrared ceramic emitters is 750 °C. Maximum temperature inside the oven is 450°C. Maximum power density on the surface of the heated product up to 30 kW/m2. 380V.
Request for a quoteBelarus
All EUROLINIA infrared panels are manufactured according to the client’s application and include high precision control systems to perfectly match the required production process. They feature extremely high reliability and durability, resistant to corrosion, high humidity, and condensation; dust, pollution, and most chemical compounds resistant. Infrared panel is usually divided into several operating zones. The heating intensity of each zone is automatically adjusted based on the data received from the thermal sensors located inside the ceramic emitters equipped with a thermocouple. This ensures compensation of heat losses at the edges of the product and helps to avoid overheating in the center. All infrared panels are assembled at our facility from scratch to the final product. We run multiple tests to make sure they are 100% in line with all the requirements and expectations. Our clients are welcome to attend such tests.
Request for a quoteGermany
Temperature measuring strips, for example, are stuck to components that heat up under load. The measuring strip shows the maximum temperature reached after the component has cooled down. This means that the maximum temperature of the component can be read off quickly and inexpensively.
Request for a quoteGermany
Technichal data: Accuracy ± 3°C at -50°C to 20°C ± 1% or 1°C at 20°C to 500°C ± 1.5% or 2°C at 500°C to 1,000°C ± 2% at 1,000°C to 1,850°C Reproducibility ± 1.5°C at -50°C to 20°C ± 0.5% or ± 0.5°C at 20 °C to 1,000 °C ± 1% at 1,000°C to 1,850 °C Optical resolution (D:S): 75:1 Smallest measurement spot: 18 mm @ 1,350 mm Temperature range: -50°C to +1,850°C Reaction time: < 150 ms Spectral sensivity: 8 ~ 14 µm Laser class: Klasse 2 (II) Wavelength: 630 ~ 670 nm Power: <1 mW Display: LCD, monochrome Temperature range (contact-temperature sensor): 50°C to +300°C Accuracy (contact-temperature sensor): ±1,5% or ± 3°C Reproducibility (contact-temperature sensor): ± 1,5% Operating conditions (operation): 0°C to 50°C, 10% to 90% RH Operating conditions (storage): -10°C to 60°C, < 80% RH (non-condensing) Power supply (internal): 9 V IEC 6LR61 Power supply (external): via USB
Request for a quoteItaly
Most industrial process temperature control units work through the pressure exerted on the water of the process utilities: this is convenient in most “standard” cases, given the higher efficiency developed by the system. However, some critical process issues can make this type of operation difficult: this is the case of machines that leak fluids, or with leakage, and that it is not convenient to maintain on the spot. In such cases, it is therefore useful to work with a vacuum temperature control unit, which sucks in utility water. FTT PD water thermoregulators are flexible and effective systems, which can work under either pressure or vacuum depending on the peculiarities of the system. Any fluid losses are therefore minimized during operations. A simplicity of operation is also ensured by the touch-screen panel, also found on other Frigofluid temperature controllers. Models with an increased pump are also available for users characterized by high pressure drops.
Request for a quoteItaly
Often the main critical issue for molding industries is not achieving the temperatures needed for their processes, but maintaining them over time. Hence the usefulness of temperature control units that not only send the fluids needed to do the job up to temperature, but are capable of subsequent self-tuning. This is the way FTT DC water temperature controllers operate, which wrap direct cooling to stabilize fluid grades after the desired temperature has been reached. This requires integration with a source of cooled water: a simple well or a chiller or cooling system (chiller or dry cooler). Our engineers are available to determine which cooling solution is the most effective and economical. Not only that. The management of these successive heating-cooling steps is easier when done with a touch screen: a feature with which FTT DC temperature controllers are equipped. Units in the FTT category are specially designed to condition molds.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.