FPDigit 16-139HE Baltoscope
Digital imaging & Software
Description
The FPDigit 16-139HE is high dynamic range x-ray detector. With a 16 Bit conversion and 139 μm² pixel pitch, this fl at panel will offer a frame rates up to 30 frames per second (2 x 2). The acqusition of image will be made by Gigabit Ethernet communication. The FPDigit has internal shielding up to 225kV; Electronics being outside of the detector active area, an additional external shielding of the electronics can be added for use above 225kV. Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming effi cient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. This helps in reducing exposure...
- Digital imaging
- Digital Radiography
Product characteristics
- Weight
- kg 4,1
- Housing
- Aluminium
- Receptor Type
- Amorphous silicon
- Conversion screen
- Direct Deposit CsI, DRZplus
- Pixel matrix - Total
- 1792 x 2176 (1 x 1)
- Pixel pitch
- μm² 139
- Spatial resolution
- lp/mm 3,60
- A/D Conversion
- bits 16
- Energy range (standard)
- kV 40 - 160
- Scan method
- Progressive
- MTF
- > 48% @ 1 lp/mm (1x1), CSl screen
- Fill factor
- % 57 %
- Standard shielding
- Shielded for 225 kV X-ray radiation
- System Interface
- Gigabit Ethernet
- Power supply
- 100 - 240 VAC / 47 - 63 Hz
- Power Dissipation
- V 15 (typical)
- Operating temperature
- °C 10° to 35°
- Storing temperature
- °C -20° to 70°
- Humidity (Operating/storage)
- % 10 to 90
Documents
Similar products from BALTEAU NON DESTRUCTIVE TESTING
BALTEAU NON DESTRUCTIVE TESTING
Belgium
The Image Processing System (IPS) software enable to process digital radiography to find and display the defects of a component. With the different filters and zoom capabilities, the most difficult and tiniest defect can be quickly located. IPS can be linked with the acquisition module to receive the images acquired. This can be done on the same computer or using a separate reviewing station. Integration is also accomplished with the automation module, showing the images in real time as well as querying the (optional) database. IPS has an extensible architecture, this means you can expand the features using add-on modules. Balteau provides a number of modules and custom ones can be developed on demand. Existing add-on: SRb (Basics Spacial Resolution), SNR (Signal to Noise Ratio), DICONDE (Reader & writer), DB (Database), & more on demand.
BALTEAU NON DESTRUCTIVE TESTING
Belgium
Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.
BALTEAU NON DESTRUCTIVE TESTING
Belgium
Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.
BALTEAU NON DESTRUCTIVE TESTING
Belgium
Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.