Digital imaging - Import export

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

IPS Report is an add-on modules to IPS012 allowing the end-user to start reporting the processing of the image automatically. The report is completely customizable regarding the needs of every industries. All metadatas from the image will be collected and added into the report, industry regulations, NDT standards, filters, measurements, and much more.

The Phantom is a tool designed by Balteau NDT to answer the highest quality requirements in digital radiography. Because of this product, different test can be defined to qualify and maintain qualified an equipment of digital image acquisition such as flat panels. The phantom is made of steel Inox 316 composed of 2 plates of 2mm thick to ensure strength and reliability of the equipment. The 2 plates dimensions are 326 x 275,5 mm and are manufactured to enable inserts of different measuring tools for quality certification purpose. The phantom software will provide a PDF reporting of the quality supplied by the digital receiver (flat panel). The measurement tools will depend of the industry and so of the specific quality requirement of that industry. If more details are required, do not hesitate to contact Balteau NDT or your local distributor.

The Scannix + is an industrial X-Ray film digitizer specifically designed to offer the highest quality of images for the NDT market. Not an additional operation but a true improvement. In the radiographic industry, Films storage and post processing have always been neglected. Both these aspects are however very important matters to take into account in the overall costs and efficiency of the Radiographic process. A computerized storage of the radiographies will also dramatically reduce the risk of loosing the archives of a job. The scannix + is driven by our Acquisition software and is delivered with the scanner as a standard. As a digital image, a radiography can also be processed with our Image Processing Software IPS012 allowing details that were hidden to appear, thanks to different filters and the contrast settings but also a lot of different tools and add-on like SRb, SNR, etc. Acquisition can also be linked to IPS012 allowing an automatic transfer of the image to start...

The Diaphragm Remote Control (DRC) module Controls the motors of the different shutters of the collimator. It works with the latest technology regarding motors control and allows up to 4 shutters. DRC stands for Diaphragm Remote Control. DRC provides an intuitive graphical user interface to view and control how you diaphragm is positionned. DRC works as a standalone module or can be integrated with Automation. It can also be integrated with an external application using a simple communication protocol based on "sockets".

The Axis Remote Control (ARC) module will control the motors of the equipment, such as manipulators, doors, etc. It works with the latest technology and allows up to 9 axes. ARC stands for Axis Remote Control and provides a uniform user interface whatever the motors are. It makes use of the motor with position encoder to offer excellent precision and repeatability. ARC works as a stand alone module and/or can be integrated with Automation. It can also be integrated with an external application using a simple communication protocol based on "sockets".

RIO is a stand alone module designed to organize, recall and display Reference Images such as ASTM. Radiographers can now load reference images within their Image Processing Software and compare with their own radiographies using all available tools. Balteau NDT has also developed an ASTM extractor that will extract all selected images from the ASTM dvd to store in your database and use with RIO module. RIO also allows to create a database of your own images, making your own references.

Dicom Dir Navigator (DDN) is a stand alone module designed to create libraries of images but also to transfer images between users. Creates your own DCM images libraries with the Dicom Dir Standard and share them with your customers, thanks to the free included viewer.

X-Ray Remote Control (XRRC) is the software module that connects to the X-ray source using a serial link and is able to control all operations remotely, directly on the computer screen. Allowing you to interact with the mA, kV, start and stop the X-ray from running, view of the tube characteristics and state, start and stop preheating, choose tube focus, load exposure charts, etc. All Balteau generators are supported by X-Ray Remote Control, contact us for more details on other brands. The LS1 from Baltograph Series has also uses the X-Ray Remote Control Software making it a friendly environment for those who uses Balteau equipment on both platform.

ADR is a software module that has been created to finalize the Automation process by identifying automatically the parts that have default or not to then inform the end user which one is « accepted », « rejected », « to be verified », etc. This will lead to a much faster flow of inspection as very strict rules will have been defined within the software, reducing mistakes and costs but increase reliability. Depending on the part that will be inspected, a lot of different criteria can be looked for in terms of default and be recognized by the ADR module such as: Dimensions, foreign substances/objects, position/location, quantity, distance/gap, nature/density, angles, profiles/deviations, and much more. The Acquisition module works as a standalone module or can be integrated with IPS and Automation. It can also be integrated with an external application using a simple communication protocol based on «sockets».

The Image Processing System (IPS) software enable to process digital radiography to find and display the defects of a component. With the different filters and zoom capabilities, the most difficult and tiniest defect can be quickly located. IPS can be linked with the acquisition module to receive the images acquired. This can be done on the same computer or using a separate reviewing station. Integration is also accomplished with the automation module, showing the images in real time as well as querying the (optional) database. IPS has an extensible architecture, this means you can expand the features using add-on modules. Balteau provides a number of modules and custom ones can be developed on demand. Existing add-on: SRb (Basics Spacial Resolution), SNR (Signal to Noise Ratio), DICONDE (Reader & writer), DB (Database), & more on demand.

Automation is the top level module that will aggregate all others such as XRRC (X-Ray Remote Control), ARC (Axis Remote Control), DRC (Diaphragm Remote Control), Etc. into one window and offer transparent access to all controllers on only one screen. Automation also includes a teaching mode which will record sequence of motions, x-ray settings, time of exposure, etc. Later the recorded sequences can be played back providing an automated inspection of components. The optional database add-on will use a SQL database to store sequences and index the images metadata (DICONDE only). The same database can then be used from IPS to quickly retrieve images using a search engine.

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

The FPDigit 22-100 is high dynamic range x-ray detector. With its 16 inch, more than 16 millions pixels and 100 µm pixel pitch, this flat panel will offer a dynamic range over 84dB with a frame rates up to 15 frames per second. The acqusition of image will be made by optical data communication. Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an...

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

The Mobi-X is a portable flat panel detector. Thanks to its battery and Wi-Fi interface, a digital inspection can now be done anywhere. Moreover the Mobi-X is very light, robust and ergonomic which makes it easy to be used in harsh environment and conditions. Equipped with an internal memory, the Mobi-X can to store images in order to allow the operator to unload them later. The Mobi-X is an X-ray detector with a 16-bit conversion for 100 μm² available in 3 different sizes. The acquisition software of the Inspection Suite comes with the equipment providing a user-friendly interface for the acquisition of images. The optional Image Processing Software (IPS012) makes it a complete solution. Flat panels are a combination of electronics and silicon, providing direct conversion support to display radiographic images instead of using the traditional film technique. This helps to reduce the exposure time but also gives an extended range of thicknesses using the same energy range.

From the innovators of welding automation, Miller Weldmaster presents the AES1800. Designed to automatically finish your rolled products, the AES1800 will weld, grommet and cut your products to eliminate excessive labor. The bottleneck of your workflow no longer has to be your finishing operation. The AES1800 is equipped with sensing cameras to ensure your grommets and cuts happen at the specific spot you determine. From preprinted banners to tennis court shading, the AES1800 will dramatically increase your products and reduce your labor needs. FEATURES, FUNCTIONS, & BENEFITS Throat capacity available in 1.21M or 1.82M (4ft or 6ft) Controlled through Miller Weldmaster Smart Screen PLC Fabric Unwind Stand Assembly Linear actuation for edge guiding Driven Fabric Puller Accumulating System Camera sensor for image sensing Digital footage counter Fabric cutting unit

The D-Tect X-ray inspection software is completely developed by DÜRR NDT and is the perfect complement to all digital X-ray systems like imaging plate scanners and flat panel detectors (DDAs). DICONDE compliant The user can be certain that images can be viewed on any other DICONDE compliant system. All-in-one All functions are included: from image acquisition, image evaluation and report generation to data import and export. High performance GPU and multi-core CPU support makes D-Tect X extremely fast and efficient.

Offset printing is much more advanced than digital printing. In the offset printing technique, the ink is transferred by rubber-coated cylinders from aluminium plates to the substrate. The plates are created in a CTP platesetter, separately for each colour from the CMYK palette, and additionally for white and Pantone colours. Each cylinder is responsible for transferring points of the image with a different component colour. All the colours put together create the final image. Contrary to digital printing, the preparation of an offset press takes a lot of time and requires considerable expense. Therefore, offset printing is economic with high-volume projects, because as the volume increases, the unit price decreases exponentially. Offset technique ensures very high print quality and accurate colour reproduction. Moreover, it offers a wider colour palette - we can get golden, silver or other colours from the Pantone palette, which is very important for complex graphical projects.

Drives detectors such as flat panel, digital camera or image intensifier. Showing images in real time, the user can take snapshot or record videos whenever he’s satisfied and it will be automatically stored on the selected disk. This module can support Diconde, Dicom, Tiff, Jpeg, Png, Bmp and raw images. The Acquisition module works as a standalone module or can be integrated with IPS and Automation. It can also be integrated with an external application using a simple communication protocol based on «sockets».

The Mobi-X is a portable flat panel detector. Thanks to its battery and Wi-Fi interface, a digital inspection can now be done anywhere. Moreover the Mobi-X is very light, robust and ergonomic which makes it easy to be used in harsh environment and conditions. Equipped with an internal memory, the Mobi-X can to store images in order to allow the operator to unload them later. The Mobi-X is an X-ray detector with a 16-bit conversion for 75 μm² available in 3 different sizes. The acquisition software of the Inspection Suite comes with the equipment providing a user-friendly interface for the acquisition of images. The optional Image Processing Software (IPS012) makes it a complete solution. Flat panels are a combination of electronics and silicon, providing direct conversion support to display radiographic images instead of using the traditional film technique. This helps to reduce the exposure time but also gives an extended range of thicknesses using the same energy range.

Main Parameters: -5.6 inch TFT screen -Pretty and very light -Full digital imaging technology, crystal-clear Image -Display screen: 5.6" TFT colr screen -Scanning manner: Electronic convex array, electronic linear array -Working frequency: 2.0MHz~10MHz -Display mode: B, B+B -Scanning range: Convex array 60°~150° -Amplification factor:1.0, 1.2, 1.5,2.0 -Image processing: 8 γ corrections, frame correlation, point correlation, line correlation, digital filtering, digital edge enhancement and pseudo color processing, etc -Conventional measurements: distance, perimeter, area, volume -Obstetric measurement: horses, cattle, sheep, dogs, cats obstetric measurement -Image gray-scale: 256 levels -Scanning line number: 512 lines/frame -Frame rate: 30 frames/second -Digital scanning conversion: 512×512×8 bits -Battery capacity: 3000mAH/7.4V,can work more than 2 hours -Memory capacity: 8GB, can optional to 32GB -Report function: auto make report -Output interface: USB port, video.

A microscope is required to examine the agglomerates in polyelefins for determining the degree of dispersion. The digital camera is used for images acquisition, documentation and archiving. It is supplied with image processing software and a PC for automatic determining the dispersion grade