HALSTRUP-WALCHER GMBH

Germany

Factory icon Manufacturer/ Producer

HALSTRUP-WALCHER GMBH
Web icon
36 Products

Germany

Positioning system with protection class IP 68 for wet area applications The PSW 31x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes with hygienic design. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. Two bus connections are available for looping the bus signal (not for IO-Link).

Request for a quote

Germany

The HIPERDRIVE HDA 70 positioning drive allows adjustment procedures for positioning and auxiliary axes to be performed efficiently, at low cost and with a high degree of precision. The HIPERDRIVE is available with Industrial Ethernet interface for direct connection to a control module. Status massages retrievable via bus. With an durable EC motor.

Request for a quote

Germany

The P 34 differential pressure transmitter is designed for pressure monitoring applications in cleanrooms, laboratories, pharmaceutical plants and operating theatres as well as for special uses in machine and plant construction. As well as measuring the differential pressure, the instrument also records positive and negative overpressures as well as flow rates or volumetric flows. The measuring range is scalable in the range from 10 .. 100 %. Two optional contact points allow the user to connect visual or audible alarms that are triggered any time values rise above or fall below specified limits. The transmitter can be configured easily via an USB interface (optional) with software. A selectable time constant allows the transmitter to be adjusted perfectly to the pressure conditions and thus ensures a stable output signal. The P 34 can be mounted on top-hat rails.

Request for a quote

Germany

This differential pressure transmitter in a control panel housing is suitable for use as a 2- or 3-point controller thanks to its two integrated limit contacts. These permit the realisation, e.g. of ventilation controls, at low cost and without the need for additional electronics. Both the threshold values and the hysteresis for the controller are easy to set via the front keyboard. The display provides readings of measurement values directly on-site in Pa, kPa, inchH2O or mmH2O as well as information about the output states of the limit contacts. An adjustable time constant (up to 10 s) allows the instrument to generate an attenuated output signal, even under fluctuating pressure conditions. Cyclical self-calibration of the zero point ensures a high level of measurement accuracy. The instrument is available with an ISO factory calibration or DAkkS calibration certificate (optional).

Request for a quote

Germany

The P 26 differential pressure transmitter is designed for pressure monitoring applications in cleanrooms, laboratories, pharmaceutical plants and operating theatres as well as for special uses in machine and plant construction. As well as measuring the differential pressure, the instrument also records positive and negative overpressures as well as flow rates or volumetric flows. The measuring range is scalable in the range from 10 .. 100 %. Two optional contact points allow the user to connect visual or audible alarms that are triggered any time values rise above or fall below specified limits. The transmitter can be configured easily via an USB interface (optional) with software. This can also be performed using a keyboard and display (optional). The measured values can be displayed in all standard units. A selectable time constant allows the transmitter to be adjusted perfectly to the pressure conditions and thus ensures a stable output signal.

Request for a quote

Germany

The pressure transmitter is particularly suitable for measuring volume flow of town gas supplies or other gaseous hydrocarbons such as butane, methane etc. in industrial furnaces or combustion plants. The instrument does not generate any ATEX zone as its design and technical safeguards mean it poses no ignition hazard. The measuring range is scalable in the range from 10 .. 100 %. This can be performed using a keyboard and display (optional). The measured values can be displayed in all standard units. A selectable time constant allows the transducer to be adjusted perfectly to the pressure conditions and thus ensures a stable output signal. The P 29 can be mounted either on a wall or on top-hat rails.

Request for a quote

Germany

This compact differential pressure transmitter is particularly suited to filter and pressure monitoring applications in the heating, air-conditioning and ventilation industries. An optional display allows measurement values to be read directly on-site in Pa or kPa. An optional time constant (up to 4s) allows the instrument to generate an attenuated output signal, even under fluctuating pressure conditions. To reduce wiring costs, the instrument is also available in a version with two-wire technology (optional). The PS 27 can be mounted either on a wall or on top-hat rails. The instrument is available with an ISO factory calibration or DAkkS calibration certificate (optional).

Request for a quote

Germany

These differential pressure transmitters are available in a wide range of precision classes and therefore suitable for applications in the heating, air-conditioning and ventilation industries as well as sophisticated laboratory applications. An optional display allows measurement values to be read directly on-site in Pa, kPa or mmH2O. An optional time constant (up to 5s) allows the instrument to generate an attenuated output signal, even under fluctuating pressure conditions. The instrument is available with an ISO factory calibration or DAkkS calibration certificate (optional).

Request for a quote

Germany

The EMA 84 is a portable, battery-powered digital pressure gauge providing highly accurate measurements of positive and negative differential pressures. Because it is durable and easy-to-use, the EMA 84 lends itself well to maintenance work and customer service applications for heating, air-conditioning and ventilation units, where it can be used for monitoring filters, measuring fireplace drafts, etc. Its precision and reproducibility also make the EMA 84 is highly suitable for use in laboratory applications.

Request for a quote

Germany

The KAL 100 / 200 calibration device combines a pressure transmitter and pressure gauge. These can be used to test and calibrate pressure sensors and other pressure gauges for low pressures both quickly and easily. The desired pressure is indicated on the digital display and pressure is generated quickly and precisely through the use of a closed loop, thereby eliminating the need for an external pressure generator.

Request for a quote

Domain icon Manufacturer/ Producer

HALSTRUP-WALCHER GMBH

Stegener Straße 10

79199 Kirchzarten - Germany

Contact
Office Building Outline icon
A page for your business
Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free