Germany
Manufacturer/ Producer
Germany
Waste incineration plants, refuse-derived fuel (RDF) incineration plants or incineration plants of any kind. For various types of cranes with internal or external holding ropes. Technical design Low-maintenance or maintenance-free for increased profitability 4-rope grab with half-closed grip Suitable for handling waste of any kind Closing rope devices: Rope nozzles KROGER MAINTENANCE-FREE, rope-protecting, roller-bearing pulley system Rigidly mounted main casing to accommodate the lower rope pulleys, easily move the ropes and reduce wear on them even when the crosshead is at an angle whilst the grab is being operated Solid, removable rope guards Rope pulley bearing: Re-greaseable plain bearing KROGER MAINTENANCE-FREE pulley block system Grab connection bearing: Re-greaseable steel bushing bearing KROGER MAINTENANCE-FREE bearing system Stable shell structure with shells made out of S355J2+N with a wear-resistant edge recessing made of Pantanax steel
Request for a quoteGermany
Underwater gravel and sand extraction using dredgers and rope excavators with 2 or 4 ropes. Suitable for use in all river and lake dredging areas with difficult ground conditions and at dredging depths of over 100m. Technical design MAINTENANCE-FREE design, which benefits both the environment and your profitability 5-rope or 7-rope reeving design in all sizes Larger capacity for increased output Lightweight design, optimised grip Closing rope infeed in star form on the grab head with the KRÖGER MAINTENANCE-FREE, rope-protecting pulley system Fixed linkage steering on one side of the grab head KRÖGER MAINTENANCE-FREE pulley block system Grab shells made of wear-resistant fine-grain steel Grab connection bearing with the KRÖGER MAINTENANCE-FREE bearing system Tooth tips are interchangeable depending on ground conditions
Request for a quoteGermany
Motor grab systems. A wide range of maintenance-free products Manufactured for tough yet smooth bulk load handling – in sea and inland ports, gravel and sand extraction, and waste processing – our KRÖGER motor grab systems are available in a variety of designs and all come with the KRÖGER “maintenance-free” advantage. To protect the environment and maximise your efficiency.
Request for a quoteGermany
Bulk handling of any kind in sea and inland ports or storage facilities. For ship-to-ship, ship-to-storage/wagon/silo handling. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Designed as a discharge and ship unloading grab with retracted pivot bearings for easy gripping under the ship’s gangway Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab connection bearing: Re-greaseable steel bushing bearing Stable, torsion-resistant design using direct cylinder linkage
Request for a quoteGermany
Handling general scrap, car bodies, steel chips, shredder scrap, paving stones and much more, in sea and inland ports or at storage facilities. For pier engineering and riverbed maintenance. For various types of cranes and excavators with internal or external holding cables. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Open, half-closed or closed grip design Suitable for handling scrap, stones, waste and other difficult to grab goods depending on design Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads, self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab connection bearing:
Request for a quoteGermany
Handling timber, stacked wood, etc., for downstream industries, in sea and inland ports or at storage facilities. For ship-to-ship, ship-to-storage/wagon/lorry handling. For various types of crane with control systems designed for hydraulic grab systems. Technical design Designed to grip stacked wood, with two interlocking shells to grip one or several logs Optimisation of crane load capacity thanks to its lightweight design which can grip maximum amounts Slim shell design for optimal penetration Wear-resistant cutting edges The hydraulic system’s dimensions, short open and close times and high closing pressure guarantee the quick grab and secure hold of the logs Protected and easily accessible inbuilt electro-hydraulic propulsion motor Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed.
Request for a quoteGermany
Bulk handling of any kind in sea and inland ports or storage facilities. The compact alternative to the MZG type grab for ship-to-ship, ship-to-storage/wagon/silo handling. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Designed as a discharge and ship unloading grab with retracted pivot bearings for easy grab under the ship’s gangway Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Horizontal electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab shells: Material: S355J2+N Grab connection bearing: re-greaseable, robust steel bushing bearing Small grab dimensions thanks
Request for a quoteGermany
Waste incineration plants, refuse-derived fuel (RDF) incineration plants or incineration plants of any kind. For various types of cranes which operate using hooks or rope/chain suspension. Technical design Open shell design Suitable for handling all kinds of waste Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Closing and opening movements controlled by directly connected hydraulic cylinders, with stable piston rod protection Grab connection bearing: Re-greaseable, robust steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Stable shell structure with shells made out of S355J2+N
Request for a quoteGermany
Slag handling in waste incineration plants or incineration plants of any kind. For various types of cranes with internal or external holding cables. Technical design Designed as a discharge grab with stable, retracted pivot bearings Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Closing and opening movements controlled by directly connected hydraulic cylinders, with stable piston rod protection Grab connection bearing Re-greaseable, robust steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Grab shells: Shell design adapted to material flow Toothed segment drive Material: S355J2+N
Request for a quoteGermany
Underwater gravel and sand extraction using dredgers with 2-cable or 4-cable winches. Suitable for use in all river and lake dredging areas with difficult ground conditions and deep dredging depths. Technical design MAINTENANCE-FREE design, which benefits both the environment and your profitability High load capacity thanks to its lightweight design Robust, torsion-resistant grab design for maximum loads Grab shells made of wear-resistant fine-grain steel Tooth tips are interchangeable depending on ground conditions KROGER MAINTENANCE-FREE bearing system in the shell pivots and cylinder rod bearings KROGER power unit is easy to service, the crosshead engine is separate from the hydraulic tank, hydraulic units are in the tank Environmentally friendly hydraulic fluid using organic oil
Request for a quoteManufacturer/ Producer
Brandstwiete 4
20457 Hamburg - Germany
Germany
Would you like to expand your plant or system or bring it up to date with the latest technology
Request for a quoteGermany
IFA Technology offers a comprehensive aftersales service for spare parts for your plant or system. We also keep a large stock of standard components at our location in Rain am Lech in order to be able to supply spare parts and wearing parts as quickly as possible.
Request for a quoteGermany
As special plant constructors, we develop state-of-the-art environmental engineering plants. At the same time, we consider your individual requirements and build customised environmental engineering plants without losing sight of the economic aspects. We are also happy to support you with prototype plants or new technologies. Industrial processes are subject to increasingly stringent regulations and legal requirements. IFA Technology offers expert support in the field of environmental regulations, both in conceptual and constructive planning and in the manufacture of your plant components and plants.
Request for a quoteGermany
In the textile industry, our know-how in weighing, conveying, mixing and dosing liquids and solids finds further areas of application. Areas of application include the provision of impregnates or other refinements of fibres or surfaces. IFA Technology considers your individual requirements and builds customised plants and systems for the textile industry. We supply all types of plants and systems - from standard systems to customer-specific special plants. Our innovative plants and systems for the textile industry support new developments and treatment options for fibres. Application of plants for the textile industry: Storage, mixing and dosing of liquids, for instance impregnations and additives
Request for a quoteCreate one request and get multiple quotes form verified suppliers.