Experts for deep-drawn parts made of stainless steel, aluminium and other non-ferrous metals (including brass, copper and nickel silver).from new development to series production: We develop perfect deep-drawn parts. Pressteck is one of the world's leading specialists for deep drawing individual parts on transfer presses and for their further processing into assemblies. In this non-cutting forming process, we produce hollow parts in several stages from a metal strip that can be made of aluminium, stainless steel, copper or brass, among other materials. Deep drawing has decisive advantages over other processes: Material consumption and production costs are lower, and at the same time the strength of the components is higher. We are highly innovative and perfect deep-drawing technology beyond what has been possible so far.
We develop decoupled, partially or fully interlinked assembly processes entirely according to your requirements, using high-performance systems and state-of-the-art equipment. ou don't need deep-drawn individual parts, but complex assemblies that are already assembled? We are your experts! First we analyse your requirements for new potentials. Combined with innovative thinking and agile processes, we then design smart solutions with you to produce your desired assemblies. Depending on your requirements, we develop decoupled, partially or fully interlinked assembly processes using high-performance systems and state-of-the-art equipment. We reliably ensure your quality requirements with integrated and individual testing measures.
Für die exklusiven Füllhalter, Kugelschreiber und Tintenroller eines Schreibgeräte-Herstellers fertigen wir mit Tiefziehtechnologie Aluminiumteile in Großserie.Angenehm liegen Füllhalter, Kugelschreiber und Tintenroller in der Hand, edel sehen sie aus. Die nahtlos aus Aluminium tiefgezogenen Deckel und Körper verleihen der Schreibgeräte-Edition einen exklusiven Look. Als der Hersteller plante, diese neue Edition auf den Markt zu bringen, ließ er sie eigens von einem bekannten Designer konzipieren. Da dieser jedoch keinerlei Augenmerk auf die Herstellbarkeit der Teile legte, stand der Kunde vor der großen Herausforderung, einen Lieferanten zu finden, der die Teile in Großserie produzieren konnte, ohne Abstriche beim Design machen zu müssen.
Selbstverständlich muss bei einem so edlen Produkt jedes Bauteil ganz besonders hochwertig sein. Bei den Aluminiumteilen gilt es im Hinblick auf die Folgeprozesse vor allem darauf zu achten, dass die Oberflächen sauber sind.
For our customers in the automotive and housing industry, we produce deep-drawn stainless steel pots with an integrated axle as a monobloc component. These are used in water pumps for electric vehicles. Our customer from the automotive industry needs pots with an integrated axle that holds a rotor. Up to now, the pot and axle have been joined in a centred manner by means of welding. The customer's wish was to produce a one-piece component to avoid welding. Deep drawing is the ideal technology for this. The size of the component required larger presses than were previously available. Therefore, we first developed tools as prototypes for larger presses on behalf of the customer. After practical tests at the customer's premises as well as at the end customer's, our client decided on a tool that was ideally suited for the production of the component in series.
Thermostatic valves - i.e. the temperature controls on the heating system - are found in just about every home. In the head of a thermostatic valve there is a metal bellows, a corrugated tube that expands according to the room air temperature. For these metal bellows, the manufacturer needed deep-drawn, very long and thin-walled sleeves. The challenge: the sleeves must be matched to the customer's downstream process under very tight tolerance specifications. Why? Because the sleeves cannot be further processed if the geometries vary. Absolute precision is therefore required. We can offer absolute precision. The customer commissioned us with the production of the sleeves. On the one hand, because we fulfil the special deep-drawing requirements. On the other hand, because we can offer an associated, targeted heat treatment for material stress relief in-house.
Pressteck has all standard sizes of MDI containers in its portfolio: 10ml, 14ml, 17ml and 19ml. If you need other sizes due to individual requirements, we are happy to offer these as well. Pressteck has all standard sizes of MDI containers in its portfolio: 10ml, 14ml, 17ml and 19ml. If you need other sizes due to individual requirements, we will be happy to offer you these as well. Depending on the medication and the propellant (CFC or HFA), different materials are used. We produce our containers from aluminium and stainless steel. While stainless steel containers are usually used uncoated, aluminium containers can also be offered in a coated version. Our containers are used as primary packaging for the administration of aerosol medication by inhaler. Patients worldwide use MDI (metered-dose inhalers) to treat respiratory diseases such as asthma and COPD.
Pressteck is one of the world's leading specialists for deep-drawn individual parts on transfer presses and their processing into assemblies.
In this non-cutting tension-pressure process, we produce hollow parts from a metal strip in several stages, which can be aluminium, stainless steel, copper or brass, among others.
Compared to other processes, deep drawing has decisive advantages: Material consumption and production costs are lower, and at the same time the strength of the components is higher. We are highly innovative and optimise deep drawing technology beyond what is currently possible. We manufacture your individual component from coiled sheet metal and master demanding geometries and high degrees of forming.
We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials.
Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm.Pharmaceutical and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.