Safety Valve
Description
Jet Flow Safety Valve represent the most advance technology in value designed for use in intermediate power boiler and organic fluid vaporizer service. Built in conformance to section I of the ASME boiler and pressure vessel code, all capacities am certified by the national board of boiler and pressure vessel inspector at 5% over pressure. Jet Flow Designed Safety Valve with Full Nozzle & hardened disc to minimize maintenance and increase seat life Open bonnet & Close bonnet both design have maximum set pressure 75 bar in Safety Valves. Material of Construction. Set pressure in psig or Kg/cm2 (g). Maximum inlet temperature. Allowable overpressure. ServiceSpecify either the media to be handled or the following physical properties or both. LiquidsSpecific gravity (Water = 1) GasesSpecific gravity (Air=1) VaporsMolecular weight (mixture of vapors. The average molecular weight) Back pressure, if any. Required capacity. Type of Endconnections. Preferred inlet size.
- Steam turbines
- Nozzle valve
- fluid vaporizer
- ASME boiler
Product characteristics
- Size Range
- 15 mm TO 200 mm
- Moc
- Cast steel,CF8,CF8M,GM
- End Connection
- Screwed End, Flanged End, Butt weld
- Pressure Rating
- 150 class, 300 class
- Trims
- SS 304,SS 316
- Design Standard
- API 526 ,520 & IBR
- Testing Standard
- API 527
- Flange drilling
- ANSI B16.5
- Leakage test
- API 527
- Suitable Application
- Steam, Gas, Air, Water, Oil
Similar products from JET FLOW TECHNOLOGIES UK LIMITED
JET FLOW TECHNOLOGIES UK LIMITED
United Kingdom
Jet Flow venturi desuperheaters consist of a Laval nozzle which utilises a part of the incoming steam flow to create a reduced pressure zone into which spray water is drawn and atomised by steam energy, and then exits in a short expanding throat which allows pressure recovery. The desuperheating performance remains constant at all loads from 100% or less, because of the atomising steam effect of the steam jet. The design is unique such that the spray water can be supplied at the same pressure as that of the steam pressure. High turndowns are possible depending upon installations
JET FLOW TECHNOLOGIES UK LIMITED
United Kingdom
Jet Flow multi orifice desuperheater regulates the amount of injected water by varying the number of orifices during operation. The ensures that the spray water pressure remains constant at all loads and an excellent and almost uniform spray quality is achieved over the full operating range, thereby minimising the tendency of spray water to accumulate in the steam line. Opening of the orifices is regulated by the positioning of a piston operated actuator directly mounted on the desuperheater. This compact and simple design ensures no separate spray water Injection control valve is required.
JET FLOW TECHNOLOGIES UK LIMITED
United Kingdom
A version of single venturi desuperheater has the same operating conditions. can be mounted easily and quickly in the exisiting pipeline. The unit can be clamped between two flanges. Sizes are between 1 1/2” to 30”
JET FLOW TECHNOLOGIES UK LIMITED
United Kingdom
Jet Flow fixed area nozzle desuperheaters are best suited for applications involving minimal load fluctuations. A fixed nozzle desuperheater utilizes high performance fixed geometry nozzles to reduce the steam temperature by directly injecting water inside the superheated steam flow. The water enters the main desuperheater body, passes through the spray nozzles and discharges into the steam line in the form of a fine mist.