Switching cam encoder NOCN
CANopen Switching cam encoder with four galvanically separated switching outputs
Description
This involves a play-free electronic switching cam encoder (abbreviated to: NOCN) with a maximum of four galvanically separated switching outputs (cams), which can be set by the customer and which are activated or deactivated depending on the relevant position of the drive shaft. A parameterisable multiturn absolute encoder with CANopen interface plus the switching cam encoder printed circuit board with separate controller are integrated into the compact housing. The encoder's CANopen position signal and the switching outputs can be parameterised separately. Parameterisation is carried out via the relevant CANopen objects in accordance with the encoder profile according to CiA, DS 406, revision 4.01. The NOCN has a fault monitoring system which outputs a fault message via the CANopen bus (emergency message) on detection of a fault.
- Measurement - Equipment & Instruments
- electronic switching cam encoder
- switchgear
- CANopen Interface
Product characteristics
- Interface
- CANopen, Relais
- Single- or Multiturn
- Multiturn
- Design
- 58mm, 64mm, 65mm, 66mm, 79mm, 120mm
- Number of switching outputs
- 2 switching outputs, maximum of 4, max. 6 with NOCN79 (relay/PhotoMOS)
- Housing material
- Aluminium, Stainless steel 1.4305, Stainless steel 1.4404
- Resolution
- 4096 = 12-bit, 13-bit maximum (= 8192)
- Code type
- Binary
- Measuring range
- 16 revolutions, 256 revolutions, 4096 revolutions
- Profile
- CANopen according to CIA, DS 406 revision 4.0.1
Documents
Similar products
ELAP AUTOMAZIONE INDUSTRIALE
Italy
The absolute encoders series MEM-Bus avail on an interface to connect to field bus systems according to the CANopen standard. The encoders comply with standards CIA DS301, DS406, DS 305, featuring the functions of Class 2. They are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). The encoder operating parameters are set directly by the user: revolutions no., steps per rev., rotation direction and preset no. The diagnostic function signals possible parameter, position or temperature errors as well as the battery alarm – the data memory is anyway ensured for a long period (30 years). The baud rate and node selection can be easily set by LSS protocol or by means of dip-switches. MEM40-Bus encoders avail on 3 signalling LEDs for supply state, line and error. The encoder comes with metal housing, round flange, solid or hollow shaft. The electrical connection is by M12 connector. The encoders are UL listed for Canada and USA markets.
BERNSTEIN AG
Germany
BERNSTEIN AG manufactured SR and SRM safety cable pulling switch devices as per IEC 947-5-5, DIN EN 60947-5-5 and ISO 13850 standards. These technical demand that when 'actuation' or the act of the breakage of the cable, there is automatic lock out as the switch moves to stop position, and reset for further use.
SHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the accssories use for machines.
QUELLTECH GMBH
Germany
The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.
Request for quotes
Create one request and get multiple quotes form verified suppliers.
- Only relevant suppliers
- Data privacy compliant
- 100% free