France
Manufacturer/ Producer
France
Especially designed for efficient lubrication of band/steel belt roller bars for continuous wood particle board presses in the chip board industry.
Request for a quoteFrance
FLUOLOG K 500 is fully suitable for all bearings and all in-movement parts subject to very high temperatures and can be used for applications relating to the food industry.
Request for a quoteFrance
"FLUOSTAR® represents a range of high quality greases based on specific perfluorinated oils. FLUOSTAR® greases are recommended when the other lubricants, mineral or synthetic, cannot meet the most demanding specifications."
Request for a quoteFrance
"FLUOLOG is a grease containing a nonflammable perfluorinated oil thickened with a micronized PTFE telomer and reinforced with anti-corrosion additives soluble in the oil. FLUOLOG is a completely inert grease in the vanguard of technology resisting as well the thermal requests and the most severe mechanical conditions as with the most concentrated chemical agents. FLUOLOG is compatible with all elastomers, seals, plastics and metals of all natures generally used in industry.
Request for a quoteFrance
GEAR FLUID® is a range of high viscosity oils for the lubrication of open gears used in the cement, lime, iron and steel industries, thermal power plants (coal), mineral processing, fertilizers, chemistry (lateral transmissions of furnaces, mills, dryers, coolers, mixers and rotating tubes in general).
Request for a quoteFrance
LUBRICLEAN EP is a "green" solvent issued from vegetable chemistry. LUBRICLEAN EP is certified without chlorine, aromatics and none VOC (volatile organic compounds). After application on surfaces to be cleaned, LUBRICLEAN EP evaporates slowly at ambient temperature and leaves a thin oily film with extreme pressure properties. The film is easily emulsifiable with water if complete degreasing is required.
Request for a quoteFrance
The GRAFOLOG® range of greases are dedicated to the lubrication of heavy duty open gear drives used in the following industries : Cement, ore, steel, coal lines in the thermal stations, fertilizers, chemicals (lateral transmissions of furnaces, grinders, dryers, coolers, mixers and rotating tubes in general)
Request for a quoteFrance
The GRAFOLOG® range of greases are dedicated to the lubrication of heavy duty open gear drives used in the following industries : Cement, ore, steel, coal lines in the thermal stations, fertilizers, chemicals (lateral transmissions of furnaces, grinders, dryers, coolers, mixers and rotating tubes in general)
Request for a quoteFrance
High performance coolants used in stationary gas engine operating in cogeneration plants
Request for a quoteFrance
Antifreeze (ready-to-mix), cogeneration facilities: heat and cold transfer circuits.
Request for a quoteManufacturer/ Producer
562 Avenue Du Parc De L Ile
92029 Nanterre Cedex - France
Turkey
Delrin gear parts are high-performance components made from a specialized thermoplastic material known as Delrin, or polyoxymethylene (POM).
Request for a quoteTurkey
The rotation of high speed shaft should not be more than 1500 rpm; The circumferential velocity of gear tranmission should not be more than 20 m/sec; The temperature of work environment should be -40-45°C. If it below 0°C, before start, the lubricating oil should be pre-heated to above 0°C. This speed reducer can be run at clockwise and counterclockwise direction.
Request for a quoteTurkey
These series which are provided in foot- (PA) and flange (PF) mounted options serve up in drive systems that need wide reduction ratio and maximum 26900 Nm of output moment.
Request for a quoteTurkey
Helical bevel gear units with 90° input and output axis range. Casing with feet, flange F options. A rigid structure in case. System resistance calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options may be provided (Coupled motor, IEC, PAM, W, Servo motor connected, ...). Different output options available (Solid shaft, Hollow shaft, With shrink disc, ...).
Request for a quoteCreate one request and get multiple quotes form verified suppliers.