Results for

Electronic cards design and manufacture - Import export

41 Companies

0 Products

GEPATEK ELEKTRONIK VE SAVUNMA SANAYI AS

Turkey

High-tech and low cost electronic card assembly in Turkey.

All the products for "electronic cards design and manufacture"

Assembled Electronic Cards

See all products
TROLL SYSTEM

Italy

The company TROLL SYSTEM, is a Manufacturer/ Producer, which operates in the Electronic cards industry. It also operates in the Construction of electronic cards, electronic cards design and manufacture, production of electronic boards, and assembly of electronic cards industries. It is based in Cerea, Italy.
STARTEC S.R.L.

Italy

The company STARTEC S.R.L., is a Manufacturer/ Producer, which operates in the Locking and closing systems, automatic industry. It also operates in the electronic cards design and manufacture, dual technology sensor, infrared sensors, and industrial automations industries. It is based in Parma, Italy.
SILIS ELECTRONIQUE

France

The company SILIS ELECTRONIQUE, is a Service Provider, which operates in the Engineering - industrial consultants industry. It also operates in the electronic cards design and manufacture industries. It is based in Limoges, France.
QUASAR DI SPEROTTO E DAL GRANDE SRL

Italy

The company QUASAR DI SPEROTTO E DAL GRANDE SRL, is a Service Provider, which operates in the Intermediary electronic transformations industry. It also operates in the industrial system and equipment advice and design, industrial electronic automation, textile machinery, and electronic cards design and manufacture industries. It is based in Schio, Italy.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

CEPYA ELECTRONICS

Belgium

The company CEPYA ELECTRONICS, is a Multi-Category, which operates in the Electronic cards industry. It also operates in the electronic cards design and manufacture, electronic component assembly, and Design of electronic systems industries. It is based in Namur, Belgium.
MICRO SYSTEMS

Italy

The company MICRO SYSTEMS, is a Manufacturer/ Producer, which operates in the Electronic cards industry. It also operates in the electronic cards design and manufacture, and industrial electronic automation industries. It is based in Novi Di Modena, Italy.
DVC

Belgium

The company DVC, is a Service Provider, which operates in the Electronic cards industry. It also operates in the Measurement and regulation equipment and instruments - output and flow, electronic cards design and manufacture, Construction of electronic cards, mechatronics, and Measurement and regulation equipment and instruments - output and flow industries. It is based in Bruxelles, Belgium.
EQUADRO S.R.L.

Italy

The company EQUADRO S.R.L., is a Manufacturer/ Producer, which operates in the Electronic cards industry. It also operates in the production of electronic boards, microprocessor control stations, control units for domotics, and electronic cards design and manufacture industries. It is based in Padova, Italy.
NUOVA RAY S.R.L.

Italy

The company NUOVA RAY S.R.L., is a Subcontractor, which operates in the Beauty care - instruments industry. It also operates in the electronic cards design and manufacture, and motorcycle replacement parts industries. It is based in Bologna, Italy.

COING SOC. COOP A RL

Italy

The company COING SOC. COOP A RL, is a Service Provider, which operates in the Electronic cards industry. It also operates in the electronic cards design and manufacture industries. It is based in Matera, Italy.
SECAD

France

The company SECAD, is a Manufacturer/ Producer, which operates in the Electronic data processing - computer peripherals industry. It also operates in the electronic diagrams, electronic cards, production of electronic boards, and electronic cards design and manufacture industries. It is based in Saint Martin Du Fresne, France.

DANNIE.CC

Turkey

The company DANNIE.CC, is a Manufacturer/ Producer, which operates in the Electronic cards industry. It also operates in the electronic cards design and manufacture, pcb design and assembly, embedded software design, and industrial and mechanical design industries. It is based in Antalya, Turkey.
EKG ELEKTRONIK KABLO GUPLAMA

Turkey

The company EKG ELEKTRONIK KABLO GUPLAMA, is a Manufacturer/ Producer, which operates in the Electric and electronic components - machines for manufacturing industry. It also operates in the electronics, Cable identifiers, electronic cards design and manufacture, and Cables and connectors industries. It is based in Istanbul, Turkey.
ELECTRONIC NEWS SRL

Italy

The company ELECTRONIC NEWS SRL, is a Manufacturer/ Producer, which operates in the Intermediary electronic transformations industry. It also operates in the design of electronic equipment, electronic cards design and manufacture, industrial electronic automation systems, and electronic measuring instruments industries. It is based in Tremezzina, Italy.
CEISTA INTERNATIONAL

France

CEISTA INTERNATIONAL has specialised in electronics subcontracting since 2006. Thanks to its location in China, CEISTA offers low-cost subcontracting for electronic boards. We help select the suppliers and components that are best aligned with our clients' needs.Thanks to our worldwide network of quality suppliers and our procurement offices in Asia and France, CEISTA controls the entire production and logistics chain, from initial designs and component prototyping all the way through to production of finished products or sub-assemblies relating to electronic boards. We provide a comprehensive service that means we can offer attractive prices coupled with rapid and on-time deliveries. Our electronic boards are destined for a number of different applications, including LED lighting, automobiles, transport, energy and telephones. All our production meets ISO 9001 standards.

Website
DOREY

France

For 70 years DOREY has been manufacturing, advising and designing industrial solutions for cutting and assembling of flexible and semi-rigid materials. We work in many different sectors from the car industry, to credit cards, thermoweldable plastic, technical textiles, medical industry and electronics, etc. A showroom to test your materials on our machines to understand the processes and adaptations needed for your application. We're at your disposal for testing, prototyping and demonstrations. Our sales department consists of a technical sales team with solid experience in industry. They are attentive to your needs and will combine their skills with yours. Our maintenance technicians will install machines on your production sites and train your staff in how to correctly use them and carry out maintenance. Our professional experience acquired over the years enables us to provide technical solutions tailored to your needs!

See all products
ESD ELECTRONICS GMBH

Germany

esd electronics is an internationally operating company located in Hanover, Lower Saxony, Germany. The medium-size company develops and manufactures hardware and software for the industrial automation market with a main focus on custom-specific solutions. This comprises the development of flat modules and systems based on PowerPC as well as ARM and Intel processors. Furthermore esd electronics is specialized in the design of fieldbus systems such as CAN (CANopen, CAN-FD) PROFIBUS, PROFINET and EtherCAT. The company develops plug-in card families such as AMC, CompactPCI, PMC, PCI, PCIe, VMEbus and XMC as well as USB devices. For most automation systems esd electronics offers different standard and real-time operating systems as well as qualified support. This particularly includes VxWorks, QNX, RTX, OS-9, Linux and Windows etc. The custom-specific automation solutions are developed by a team of highly qualified and motivated engineers. The manufacturing capacities are available from prototyping to larger serial production. Training and workshops complete the development services. esd electronics is mainly active in the industrial sectors of automotive and machine industry, medical as well as aerospace technology. For trademark notices please visit our website: https: //esd.eu/en/content/trademark-notices

All the products for "electronic cards design and manufacture"

PCI Express® EtherCAT® Slave Interface (ECS-PCIe/FPGA)

M.2 Card with 2 CAN FD Interfaces (CAN-M.2/402-2-FD)

PCI Express® Mini Card with 2 CAN FD (CAN-PCIeMini/402-FD)

PCI Express® Board with up to 4 CAN FD (CAN-PCIe/402-FD)

PCI-CAN FD Interface with 2 channels (CAN-PCI/402-2-FD)

See all products
BRUDER ELECTRONICS, LDA

Portugal

Development Services & Electronic Product Design BRUDER ELECTRONICS design and develop industrial electronics and electronic systems. According to our Life Cycle Engineering approach, manufacturing, assembly, logistics, maintenance, support, user training, recycling, etc. are integral parts of the design process. With our guiding principle ‘Quality cannot be tested in, Quality must be designed in! ‘, we can support and accompany our clients in all stages of the design flow. Our services include: Systems Engineering, Hardware Engineering, Software Engineering Integrated Product Development, Project Management Requirements Engineering Life Cycle Engineering Hardware Synthesis and Code Generation System Level Modeling and Modeling Tools Verification-, Validation- and Test Procedures Software Development, Firmware, Embedded Programming Hardware Software Co-Design Microelectronics, Micro System Technology, Optoelectronics Microprocessors, Microcontrollers, Signal Processors, FPGA Design Real-time Systems Communication Protocols and Bus Systems Design for Manufacture and Assembly Production Management. Our products include: PCI Express analog and digital I/O cards USB and Ethernet Mesuring Systems.

See all products
ETS JAUNET

France

Ets JAUNET is a family business founded in 1992 that specialises in cabling electronic cards, wire cabling, cabling for control enclosures, product integration, electronic and mechanical CAD, test bank design and construction, part assembly and inspection, etc. Located in north-west France between Rouen and Paris, Ets JAUNET has 2500 sq m of workshop space and supplies the manufacturing, transport, aviation, defence, medical and high technology sectors. Ets JAUNET delivers technical cable services for all industries, up to the UGBA and 0201 boxes, in small and medium series. We manufacture your electrical looms, harnesses and enclosures in-house, from the most simple to the most complex.Ets JAUNET can model electrical enclosures, racks, bays and all other mechanical parts.

PRO-C PROCESS CONTROL

Turkey

We provide our customer with quality service in the matter of electric-electronic, automation, machine, project development, research-development operations. Some of our activity areas offer service in the field of the electronic card and the device, signal converters, timber drying kiln control, turn-key factory automation, AG, OG, MCC, PLC panel manufacturing design, engineering services, consulting, PLC software, SCADA software, packaging systems, belt scales, dosing systems, weighing systems, load cells (Load-Cell), etc ...
PRASTEL FRANCE

France

Prastel, specialises in the design and manufacture of electronic systems for automatons, access control and security. Thanks to our expertise, we have become one of the leaders in contactless identification and electronic cards. With our rich experience in the design and manufacture of electronic systems, Prastel can implement the development of fully customised and innovative solutions according to our customers' requirements.
INNOVATIVE ELECTRONIC TECHNOLOGY LTD

United Kingdom

IET designs and manufactures electronic access control equipment. With our own ISO9000 approved factory we have been supplying security installation companies for nearly 30 years. Products include door controllers, magnetic stripe readers, cards, proximity readers and more. Contact us for further information, details of our training and technical support.
SEACOMP

United States

SEACOMP is a design and manufacturing partner for electronics in the consumer, medical, and industrial spaces. We take your innovative idea from concept to a physical product that can be distributed worldwide. Our focus is bringing your new product to life through our proven NPI (new product introduction) process: - design engineering and design for manufacturing (DFM) - production preparation and setting up your supply chain - scaling to volume production - optimizing your production processes and supply chain Founded in 1989, our services have transformed over the years to who we are today: your design and electronics manufacturing partner. As a global company, we offer sales and distribution within Europe, design engineering at our U.S. headquarters and a wholly-owned ISO13485 certified facility in China. We plan to open a Mexico facility in 2023. Developing an electronic product is a long process with many individual decisions that must all come together. A wrong decision can have an undesirable cascading effect putting your product launch at risk. Simplify your product development journey by partnering with SEACOMP: we guide you through the entire process from engineering to supply chain set up and everything in between. With SEACOMP, you’ll have design and manufacturing expertise on your side so that you can focus on growing your business. We know the challenges that come with developing a new product and exist today to help you successfully launch your device.

All the products for "electronic cards design and manufacture"

Engineering and DFM

Turnkey Electronics Manufacturing

Website See all products
KDTECH SP. Z O.O.

Poland

Welcome to KDTECH, your premier provider of contract electronics manufacturing services based in Wrocław, Poland. At KDTECH, we pride ourselves on offering comprehensive electronics assembly solutions tailored to meet the diverse needs of our clients. Our services include state-of-the-art SMT (Surface Mount Technology), THT (Through-Hole Technology), X-ray inspection, and Conformal Coating, ensuring the highest standards of precision and quality. Our commitment to excellence is further demonstrated by our additional offerings in the form of outsourcing services, including advanced Flying Probe and ICT (In-Circuit Testing) tests. These services are designed to provide thorough and reliable testing processes, ensuring your products meet rigorous quality standards and performance expectations. What truly sets KDTECH apart in the industry is our unique blend of advanced technology and unparalleled flexibility. We understand that each client has specific requirements, and we strive to adapt our processes to meet those needs efficiently and effectively. Our team of skilled professionals is dedicated to delivering top-notch services that exceed your expectations, ensuring your projects are completed on time and to the highest standard. Quality is at the core of everything we do at KDTECH. Our management system is certified to ISO 9001 standards, reflecting our unwavering commitment to maintaining and continually improving our quality management practices.

Website See all products
NEW DIGIMATIC S.R.L.

Italy

The company NEW DIGIMATIC S.R.L., is a Manufacturer/ Producer, which operates in the Electronic cards industry. It also operates in the electronics, Design and manufacture of presentoirs, videowall, and audiovisual equipment industries. It is based in Roma, Italy.
CMA ELECTRONICS

France

CMA Electronics, a firm based at Riedseltz in Alsace, specializes in customized electronic board design and manufacturing. We are your ideal partner for PCB prototype and electrical module assembly. Our core business is assembling electronic boards in limited numbers, ideally for prototyping or short run needs. Feel free to contact us for more details.
EEGI

France

The company EEGI, is a Subcontractor, which operates in the Electronic cards industry. It also operates in the Electronics - studies and research, Electronics - studies and research, electronic cabling, and Design of electronic systems industries. It is based in Grainville Sur Odon, France.
PROGETTRONICA S.R.L.

Italy

The company PROGETTRONICA S.R.L., is a Service Provider, which operates in the Electronic cards industry. It also operates in the Onboard electronic systems, design of electronic equipment, and Onboard electronic systems industries. It is based in Arezzo, Italy.
SKYLAR GROUP LIMITED

Netherlands

The company SKYLAR GROUP LIMITED, is a Wholesaler, which operates in the Electric and electronic components - machines for manufacturing industry. It also operates in the Magnetic cards, Electronic cards, atm, Magnetic cards, access counting, and Electronic cards industries. It is based in Zeeland, Netherlands.