Results for

Treatment plant works - Manufacturer Producer - Germany

18 Companies

2 Products

ENVICON GMBH

Germany

For more than 25 years, we have been manufacturing different types of aerators with various diaphragm materials for waste water purification and drinking water treatment in Germany. With our dedicated and experienced team, we advise customers all over the world in matters relating to material selection, arrangement of the aerators in treatment tanks and operation for their specific waste water situation. In collaboration with a university, we also offer flow simulations for optimising the arrangement of the aerators and for preventing short circuit currents. Our products are sophisticated, efficient and durable. We retain tried-and-tested products and processes while continually extensively developing new ones at the same time with our partners, and we adapt our products to new requirements for environmental protection and cost-effectiveness.
EZM EDELSTAHLZIEHEREI MARK GMBH

Germany

The EZM Edelstahlzieherei Mark manufactures drawn, sanded and polished bright steel using the cold deformation process and standard profiles and custom profiles according to customer drawings in almost all steel materials. Our high quality products usually end up being used in system and mechanical engineering, the automotive industry and in medical and energy technology. Drum dyeing machines and spring production machines from the brand Proll & Lohmann as well as heat and chemical surface treatment from the brand BAK are manufactured at EZM Edelstahlzieherei Mark's Werdohl plant. Among other things, the EZM metal working and service GmbH makes spindle bearings, straightening machines for round and profile materials with powered straightening rolls as well as custom orders. The innovative combination of heat, blasting, straightening, milling and planing processes at the EZM profile machining plant in Rohr/Thüringen represent a cost-effective alternative able to compete with traditional manufacturing technologies.

Website See all products
ALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH

Germany

Our patented casting resin system, ALWA MOULD D, is the fastest curing casting resin system in the world. It is very easy to process and does not need to be post-tempered. Our easy to use system has a pot life of only 20 minutes! Deep drawing can take place immediately after demoulding. From 1 to 2500 kg, everything from large bathtubs to small chocolate moulds can be cast. Commercial vehicle manufacturer Aixam has been successfully working with our system for years. With our innovative ALWA POR porous plates, the time-consuming drilling of vacuum holes is no longer necessary. They impress with high stability, compressive strength and a permanent temperature resistance of over 190 °C. ALWA POR is suitable for vacuum deep drawing and forming processes as well as aeration for aquariums, fish ponds and sewage treatment plants, ventilation of injection and blow moulds, all processes with hot air and steam, vacuum clamping technology, filter applications, air film sliding technology, foundry, etc.

Website See all products
DINO ANLAGE- UND MASCHINENBAU E.K.

Germany

We react quickly to your individual needs. DINO Bremen is one of the leading manufacturers of electric steam boilers. DINO achieved this position not by company size, but through the efforts of highly motivated employees who always focus on the customer's needs in their work. This is why our engineering company has been successful on the international market for more than 50 years. In addition to electric steam generators, DINO is also setting standards with respect to distillation equipment and steam superheaters. Sewage treatment systems, water treatment plants, heat exchangers, condensate collectors, drinking water and fuel tanks, sludge tanks and steel and stainless steel constructions made out of tubes and sheet metal complement our product range. Since our company was established in 1960, we have delivered more than 25, 000 boiler systems to over 140 countries. Our staff manufactures products according to the individual requirements of the customers, while preferring environmentally friendly technology.

See all products
ATN WASSERAUFBEREITUNG GMBH

Germany

We have been engaged in water treatment for over 25 years – clean, safe and sustainable. ATN stands for maximum flexibility to implement your individual customer requirements. No matter whether you need advice, engineering, production, assembly, or service and maintenance – when you work with us you get the full spectrum, individually tailored to your needs. Thanks to solid, long-term experience, highly competent and motivated staff members, and consistent innovation, we are able to provide you with economical and sustainable methods and plants for optimal water treatment in a wide variety of sectors. . Our cooperation with other companies allows us to offer you comprehensive solutions from a single source. When we select our partners, we place value on finding the highest quality. We strongly believe in keeping our manufacturing in Germany, and in the values that come along with this.

All the products for "treatment plant works"

Consulting

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

METALLBEARBEITUNG BECKER GMBH

Germany

Metallbearbeitung Becker GmbH was founded in Dautphetal in 1996. Within a relatively short space of time, we have been able to expand our production and storage spaces to an area of 6000 m² today. At present, we have a wide range of CNC machines available for turning and milling. Inductive hardening, complete assemblies and equipment for machinery and attachments are some of the fields of activity that are carried out by the experienced employees of our company. Production and waste disposal are carried out in accordance with strict environmental standards. For certain periods of time, all the energy required for manufacturing is generated and supplied solely from solar installations at the company's own plant. We use modern CNC machines to manufacture individual workpieces and assemblies according to drawing specifications. We are also able to work with cast components that have been provided by customers, for example. Furthermore, we can manage the procurement of materials and the organisation of additional process steps, such as surface and heat treatment.
GERWECK GMBH OBERFLÄCHENTECHNIK

Germany

Gerweck GmbH surface treatment is one of the leading service companies for galvanic surface processing and the plating of metals and light metals. The successful combination of band and single part galvanization in conjunction with high-quality and customer satisfaction has earned us customers from the automotive, electronics and medical technology industries. We work with customers from the early stages of new projects using our newest technologies to create prototypes, all the way through to series production. In order to be able to meet the requirements of dynamic markets, technological plant development and the newest methods of analysis remain at the forefront of what we do. We offer collaboration and a flexible adaptation of our systems to your products. Our production planning is managed using modern system control as well as an ERP system supported by SAP. For our company this is the first important step within the framework of digitalisation 4.0.
ABACO - HTFBAU GMBH

Germany

By virtue of more than 2.200 employees and of more than 500 machines and equipments we represent a strong competitive force, able to mobilize itself quickly in order to develop large scale works, works of a high quality that certify our position as leader.Activities: • Civil and industrial buildings; • Restorations of historic monuments; • Installation works: water supply, canalization's, heating and air conditioning, pumping stations and waste-water treatment plants; • Building of roads and highways; • Building of bridges and footbridges; • Hydro-technical buildings, land improvements, water management, combating soil erosion; • Mine closures, greening and decantation ponds; • Transports and mechanization; • Equipment rental; • Real estate development and promotion; • Tourism activity.
OVIVO DEUTSCHLAND GMBH

Germany

Ovivo is a global company with offices in 15 countries and five continents and is solely dedicated to treating water and waste water. As real water specialists, we understand the complexity of water and the day-to-day reality for our customers. We are driven not only by the global aspects of tried-and-tested practices, we are also proud to challenge standards! Our well-established technologies, unmatched experience and corporate culture enable us to realise first-rate projects all over the world. We are specialists in planning, constructing and maintaining the following facilities: Ion exchanger plants, complete desalination plants, turnkey plants, waste water treatments and decontamination. We also specialise in water management, water recycling, recovering resources, servicing and maintaining waste water treatment plants (WTTP), and, in particular, eliminating heavy metals.

Website
APROVIS

Germany

APROVIS – innovation from a single source. APROVIS is an energy company that is active across the world. Our expertise focuses on exhaust gas and gas processing technology. We are experts in single components and system solutions. High quality and reliability have been important to APROVIS since it was founded in 2000. With an export ratio of over 50%, APROVIS is the only provider of system solutions in the CHP market for combustion gases of gas-powered engines and integrated solutions for cogeneration units – with its own products. APROVIS achieves extremely quick delivery times. We also personally support each project from planning to commissioning. We work strictly in accordance with applicable regulations and test standards, with the European Pressure Equipment Directive, ASME or EAC. APROVIS offers a wide range of products: For gas treatment, we offer FriCon gas cooling systems, ActiCo activated carbon filters, gas heat exchangers and compactors. The waste gas technology sector comprises waste gas heat exchangers, steam generators, catalysts (Oxi, three-way and SCR catalysts), diesel particulate filters and chimneys. High-temperature heat exchangers and leaking steam condensers are among special applications. APROVIS ensures a long service life for systems and devices thanks to maintenance, service and targeted spare part management. APROVIS means BETTER PERFORMANCE.

All the products for "treatment plant works"

ActiCo - activated carbon filters

FriCon - gas treatment

Website See all products

GRUBE GROUP

Germany

The Grube Group has been meeting the requirements of the market and performing services all around the world since 1974. Using different methods, the company specialises in assembly work for major industrial centres, thermal power plants and petrochemicals. This involves the use of mobile annealing lines and mobile machining equipment, among other machinery. Thanks not only to our long-standing expertise and state-of-the-art technology, but also our exceptional flexibility and mobility, the company is now the first-choice partner for industrial and major customers. In addition, our HR service is available 24 hours a day. A service you can trust. References from successful projects within Germany and abroad. In recent years, the Grube Group has supervised countless projects all across the world – from a chemical park in Belgium to a Russian pipeline in the Black Sea, from Bavaria to Algeria. The Grube Gruppe is always the right choice when particular quality and flexibility are required. We can offer the following for your project, among other services: Sophisticated plant technology, quality-oriented HR services, consumables and accessories, as well as quick and simple order processing. We also provide services in mobile machining technology, cutting, chamfering, machining sealing surfaces, pre-heating and annealing pipework, among other areas. You can find our entire range of products and services at our website www.grube.group. If you have any further questions, please do not hesitate to contact us.

Website
FLOTTWEG SE

Germany

Flottweg is one of the worldwide leading solution providers in the field of mechanical separation technology. Our decanters, disc stack centrifuges and belt presses exclusively manufactured in Germany are the preconditions for high efficiency in production and outstanding quality of our customers’ end products. In the petrochemical, chemical, pharmazeutical and the food industry but also in the field of mining as well as in the environmental area for the treatment of waste water or oil sludges – Flottweg’s premium products and systems work successfully everywhere. Thousands of satisfied customers all around the world are our best reference. For more than 60 years Flottweg have been developing and producing decanter centrifuges, separators, belt presses, and systems considered extremely powerful and reliable. In many industrial areas, they handle key functions in the clarification of liquids, separation of liquid mixtures, and concentrating and dewatering.

All the products for "treatment plant works"

HTS Decanter

C2E Decanter Centrifuge

C7E Decanter Centrifuge

OSE Decanter

C8E Decanter Centrifuge

Website See all products

ITG INDUKTIONSANLAGEN GMBH

Germany

ITG Induktionsanlagen GmbH is a member of the SYSTEC corporate group and one of the leading manufacturers in the field of induction heating systems. Aside from carrying out customer-specific tasks in both traditional and new induction technology applications, we also offer an expert service for our systems worldwide. Qualified specialists are available for your specific application and, in collaboration with you, can develop a system concept in accordance with your vision. Typical applications include hardening, smouldering, heating, smelting, tempering, forging, annealing and coating. We develop and produce our own power supply. Our range of converters in the medium and high frequency range cover 50 Hz to 1000 kHz with power outputs from 2 kW up to several megawatts. Energy efficiency, energy savings and global requirements regarding "Green Economy" are at the heart of converter technology.

Website
CHEMEC GMBH

Germany

WE ARE YOUR EXPERIENCED PARTNER FOR GAS ANALYSIS. CHEMEC was founded in 2000 as an engineering firm for chemical measurement technology. We have many years of experience in using gas sensors in biogas analysis, especially in the field of thermal conductivity sensors and electrochemical gas sensors. OUR TECHNOLOGY OFFERS THE HIGHEST RELIABILITY. WE ENSURE YOUR SUCCESS WITH OUR CONSULTATION AND SERVICE. No matter whether it concerns fermentation processes in agricultural biogas plants or in industrial or local sewage treatment plants, exact and highly reliable gas analysis is crucial for the optimal functioning of plants. We have been developing and manufacturing gas analysis equipment based on our own technologies for around 20 years.

Website
FLUIDTEC FLÜSSIGKEITSTECHNOLOGIE JAN PETER KIEL

Germany

FLUIDTEC offers various technologies for water treatment and pump technology. FLUIDTEC has made it its business to design technical solutions for water treatment and water pumping for its customers ecologically and economically. Sustainability as well as the quality of our products and services are everyday requirements that the customer strives for when considering the environment and economy. Our product range consists of: Complete technical systems for processing water and other liquids. System components for water and liquid treatment. Consumables for water and/or liquid treatment.

Website
CHRISTIAN STÖHR GMBH & CO. KG

Germany

With more than 50 years of experience in plastic processing, we produce our Hel-X fillers for biological waste water and gas treatment and for use in aquaculture. You can build on this wealth of experience as the basis for high-quality Hel-X fillers made of plastic. We manufacture exclusively at our site in Germany using a method that we developed ourselves, in strict compliance with high quality and environmental standards. Our Hel-x fillers are easy-to-use, highly effective and offer low investment costs and running costs, making them not only an ecological choice but economical too. Hel-x fillers are used all around the world to treat municipal and industrial wastewater in MBBR and IFAS systems. They are also used by many customers in aquaculture and biogas plants.

Website See all products
OGE GROUP

Germany

OGE Group is a sales organisation of a group of private companies from various industrial sectors. Our strategic supplier network meets all the demands of global value creation with a competitive mix of cost-effective production sites, specialised niche manufacturers and quality leadership of industrial goods and services. Above all, our service is provided from a single source, with quick response times and delivery reliability. You can see our entire product range here, please do not hesitate to contact us.

All the products for "treatment plant works"

Power plant - Flue Gas Treatment

CONDITIONING & AIR TREATMENT PLANTS

See all products
SELUTOR GMBH

Germany

The company SELUTOR GMBH, is a Manufacturer/ Producer, which operates in the Water retreatment - equipment and installations industry. It also operates in the glass grinding, engineering for industrial sewage treatment plants, and water treatment industries. It is based in Duisburg, Germany.

Find quotes for

Filters

Results for

Treatment plant works - Manufacturer Producer - Germany

Number of results

18 Companies