Results for

Tubes for the automotive industry - Germany

22 Companies

4 Products

NOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE

Germany

Novelis is the leading manufacturer of flat-rolled aluminium products and the world's largest recycling company for aluminium. In close collaboration with our customers, we offer innovative solutions for manufacturers of drinks cans, automobiles and special products. Thanks to the global manufacturing and recycling capacities of our integrated network of modern roller and recycling facilities in North and South America, Europe and Asia, Novelis supplies consistently high-quality products all over the world. Our business activities focus on sustainability. This also influences our partnerships with stakeholders in the aluminium sector. The increasing use of lightweight, practical and always recyclable aluminium opens up new opportunities for us to help our customers to achieve their sustainability goals and to supply them with environmentally-friendly products in the expected quality.

All the products for "tubes for the automotive industry"

Innovation

Website See all products
HELLER KUNSTSTOFFE GMBH HERBORN

Germany

Manufacture and sale of plastic profiles and tubes for the automotive, furnishing and electrical industries, mechanical engineering, air conditioning, window construction, the sanitary sector and structural and underground engineering. Manufacture of user-friendly and economical end products such as handle profiles, fitting profiles, ladder profiles, drawer profiles, door seal profiles, edge veneer, bench profiles, window profiles, roller shutter profiles, abutting edge profiles, handrail profiles, cable ducts, ceiling profiles, flooring profiles, wearing strips, angle profiles, edge guard profiles, U-shaped profiles, cover profiles, anti-rattle solutions, weatherstrips, flat sections, clamping profiles, hollow profiles, sealing profiles, joint profiles, filler profiles, shower cabin profiles, sanitary profiles, boat profiles, round cord, tubes, rings and much more at two productions sites.

Website
ATTEC INTERNATIONAL GMBH

Germany

ATTEC International GmbH is an international distributor of steel tubes for applications in automotive, energy, industry, mechanical engineering and construction sector. Currently we are serving our customers in 26 countries. * welded steel tubes EN 10217-1 | EN 10217-2 | EN 10217-3 | EN 10210-2/EN 10219-2 EN 10296-1 | EN ISO 3183 OD 21, 3 - 323, 9 mm | WT 2 - 12, 7 mm EN 10255 L/M/H OD 21, 3 - 165, 1 mm | WT 2 - 4, 5 mm(L), 2, 6 - 5 mm(M), 3, 2 - 5, 4 mm(H) --- * seamless steel tubes EN 10216-1 | EN 10216-2 | EN 10216-3 | EN 10297-1 OD 17, 2 - 660 mm | WT 2 - 75 mm EN 10210-2 OD 21, 3 - 323, 9 mm | WT 2 - 12, 7 mm EN 10255 L/M/H OD 21, 3 - 165, 1 mm | WT 2 - 4, 5 mm(L), 2, 6 - 5 mm(M), 3, 2 - 5, 4 mm(H) * precision steel tubes EN 10305-1 OD 4 - 210 mm | WT 0, 5 - 20 mm EN 10305-2 OD 15 - 130 mm | WT 1 - 10 mm EN 10305-3 OD 15 - 93 mm | WT 1 - 3 mm EN 10305-4 OD 6 - 80 mm | WT 1 - 12, 5 mm EN 10305-5 OD 10x10 - 100x100 | WT 1 - 5 mm * cylinder tubes EN 10305-1 HP OD 50 - 125 mm | WT 5 - 7, 5 mm EN 10305-1 HPK (Ra inside max 0, 4 μm) OD 20 - 140 mm | WT 2 - 30 mm EN 10305-1 HPS (Tol. H8, Ra inside max 0, 3 μm) OD 50 - 180 mm | WT 5 - 22, 5 mm EN 10305-2 HPS (Tol. H9, Ra inside max 0, 8 μm) OD 35 - 115 mm | WT 3 - 7, 5 mm EN 10305-2 HPZ OD 35 - 130 mm | WT 3 - 7, 5 mm * boiler tubes EN 10216-2 | EN 10216-3 OD 17, 2 - 660 mm | WT 2 - 75 mm EN 10217-2 | EN 10217-3 OD 21, 3 - 323, 9 mm | WT 2 - 12, 7 mm

See all products
HANS BERG GMBH & CO. KG

Germany

Perfection to detail is the key to a precise whole. That principle has consistently remained the company philosophy ever since it was first founded in 1950. Hans Berg GmbH & Co. KG is an internationally operating manufacturer of deep-drawn and metal tube components for a vast variety of industries. The Group has sites in Germany in Reichshof (headquarters) and Florstadt, and in Turkey in Dilovasi/Istanbul, employing a staff of roughly 600 people and specialising in cold-forming, joining, threading and cutting tool technology. Berg is the technological and market leader in the field of fittings and connections for radiators and convectors. Other important business sectors include heating, cooling and the automotive industry. As a development partner, Berg develops and manufactures high-precision and safety components for large and specialised suppliers in the automotive industry, for example applied within the fields of vibration damping and airbag gas generators.

Website
TRANSFLUID® MASCHINENBAU GMBH

Germany

The solution for tubes Many promise solutions. We are the solution. We are transfluid®. The solution for tubes. For this, we are working continually on progress and developing for our customers technologies which are easy to use, sustainable and specifically tailored to the respective requirements. This is not only the standard we set ourselves, it is our motivation for the future. This is because our drive is to realise, together with our customers and for our customers, ideas which give rise to solutions. Industry partners across the globe transfluid® is an internationally preferred partner for the production of pipe machining and bending machines. We have been developing our pipe machining technologies in a customer-centric manner since the company was founded in 1988. For example, we offer tailor-made solutions for applications ranging from plant and mechanical engineering, the automotive & energy industries, shipbuilding and aerospace to the production of medical equipment. With effective planning and an intensive, local consultation service. Going forward together We are the global market leader in machines and systems for controlled rotary forming techniques (incremental). Highly complex forming geometries can be generated with these rotary forming systems. Mechanical working with very tight tolerances, sharp-edged chamfer structure and polished finishes is also possible.

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

ROHRBEARBEITUNG KETTERER

Germany

Rohrbearbeitung Ketterer – abrasive cutting test centre/Abrasive cutting for tool and machine building – Wet or dry cutting. We are certified to ISO 9001. Series production runs and prototype development for the automotive, aero-engineering and other industries. We are the specialists in processing hard-to-cut materials. Stainless steel, nickel, titanium, molybdenum, tungsten, vanadium, tantalum, niobium, gold, carbide and also ceramic and composite materials such as CFK or GFR. Pipes with wall thicknesses from 0.1 mm. Outer diameters from 1.0 mm to 200 mm. Cutting lengths from 3.0 mm. Calibration, expanding, notches, hole punching. Series production: Cutting tube-formed parts on 3D-formed clamping devices. Manufacturing pipe elbows from tube coils. Carbide blanks. Up to 40 mm outer diameter. Tool manufacturing: Quick-change fixtures with 3D-milled forms according to your dataset. Pneumatic clamping and cooling water supply on the standard base block. Machine building: Individual construction according to customer requirements. Manual machine – manual cutting with pneumatic clamping – for quick-change devices. Half-automated machines/manual cutting/clamping and pneumatic/electric feed. Fully automated (also with robotic handling system) for large-scale production.

Website
ERNST BRINCK & CO. GMBH

Germany

Tubular connectors and aluminium casting direct from the manufacturer We produce our tubular connectors exclusively from high-quality marine weatherproof aluminium alloys with low weight, maximum stability and natural corrosion resistance for a wide range of applications. We would be pleased to plan your individual tubular designs, prepare layout diagrams with parts lists and deliver our tubular connectors together with tube sections, which are marked and customised to your needs. Machine and safety railings from Brinck tubular connectors are TÜV type tested according to pr EN ISO 14122-3. You can also benefit from our experience in aluminium casting and as a system supplier. For over sixty years, we have been producing customer-specific aluminium cast parts as a reliable supplier to the automotive and machinery industries. From conceptualisation to implementation in finished assemblies, we offer you our all-round support.

Website
FRÄNKISCHE INDUSTRIAL PIPES GMBH & CO. KG

Germany

FRÄNKISCHE Industrial Pipes is a wholly-owned subsidiary of FRÄNKISCHE Rohrwerke, the world's first manufacturer of corrugated tubes. We develop products for the industrial and automotive sector with our customers' needs in mind. Our international team of experts with their versatile skills strives to achieve their common goal: Making our customers' lives easier. The versatile competences of our experts are globally networked in order to stay close to the customer. With our diversified teams of professionals we ware in a position to see through the eyes of our customers and to perceive their needs. This is how we combine our personal experience with that of our customers in order to develop brand-new products an innovative solutions. We develop extraordinary solutions day by da and manufacture them from high-quality materials.

See all products
SCHULZE-BRAKEL GMBH

Germany

Since Schulze-Brakel was founded, we have focused on providing our customers with the best product quality, combined with first-class customer service and short delivery times. We are ISO 9001 certified because quality is the basis of our business. As the world's leading manufacturer of sound enhancement solutions, we have a virtually unlimited selection of custom ("Schulz") windscreens for radio, television, sports and special events, OEM windscreens for leading microphone manufacturers, right through to our high-tech offering of premium DeadCats. Over 500 standard shapes, an almost unlimited selection of flock colours and optimised printing processes for your optimal outdoor presentation at every event. Our department for OEM specialist products offers customised foam solutions for a wide range of applications. From sound-absorbing parts, e.g. tubes made of polyurethane foam with an outer diameter of 15 and 17 mm for the automotive industry, through to packaging, seals and the reduction of noise emissions – everything is included. Holes, 2D forming, cutting, machining, pressing, punching: Together we will find a solution for your requirement. With our ISO-certified production, our high-quality SchulzFoam, as well as our complete CNC machinery, we are able to deliver a consistent product on time and in sequence.
AS-KA QUALITÄTSPRODUKTE E.K.

Germany

As a second-generation family business, AS-KA has known exactly what it's doing ever since 1992 when it comes to the development, production and sale of individually manufactured rubber, TPE and plastic products, as well as metal and aluminium products for the German and international market. The focus here is on vulcanised and extruded rubber, TPE and plastic products, which are represented by the main product groups of profiles, tubes and moulded parts, as well as cast or turned metal and aluminium products, which are divided into the main groups of forged parts, turned parts and die-cast aluminium parts. So as to be able to offer our customers from the automotive, cab and caravan construction, industrial, electrical engineering, technical trade, construction and mechanical engineering, household goods and coach building fields – plus many more – a comprehensive product range, we have added sector-specific products such as insulation material, gas springs and other products to our product focuses.

GREMCO GMBH

Germany

We are your contact for high-quality components for high-tech cabling: from heat-shrinkable sleeves and braided sleeving to heat protection, MIL cables and the appropriate insulation. As one of the leading manufacturers of heat-shrinkable tubing and insulating sleeves for the automotive, environmental and aviation industries, we have many years of experience in complete system solutions or custom-made products. Our product range includes protection solutions for cables, pipes, tubes and components against moisture, abrasion, heat or electrical impact. Heat shrink products for the low and medium voltage range. We have also been developing high-quality protective hoses, multi-chamber and multi-lumen hoses for our partners in the medical technology sector for many years. Contact us and we will find the right components for your high-tech cabling and the corresponding cable management. Our product range as manufacturer for you: - Heat shrinkable tubing FITCOTUBE® - FITCOFLEX® fabric hoses - Insulating hoses - PTFE Liners & Teflon® Hoses - ePTFE Membranes - expanded PTFE - Wires / Cables (MIL & UL cable and wire) - Heat protection for the automotive sector and other industries - Solder and crimp connectors - Processing equipment We have been successfully active on the market for over 30 years and serve customers from various industries. The flexibility in our production enables us to respond to special customer requirements.
ABL TECHNIC ENTLACKUNG GMBH

Germany

The ie ABL-TECHNIC Group is the world's largest paint stripping company, with 20 sites in ten countries. We offer paint stripping services with the latest technologies, with the aim of using the process optimal for you, and always focus on environmental sustainability when doing so. We have been working on this around the world for over 40 years. We can produce the following certifications: DIN EN ISO 9001, DIN EN ISO 14001, DIN EN ISO 50001 and specialist waste disposal company. Our main service is chemical and thermal paint stripping, as well as filter management for the automotive sector, for automotive suppliers, the industry and rim manufacturers as well as the chemical industry and refineries. Our range stretches from the cleaning of small parts as bulk material to shell and tube heat exchangers with a weight of up to 30 tonnes and a length of 8.5 m. We also offer repair and straightening work, rubber removal, industrial filters, disposal and logistical services.

SITEC INDUSTRIETECHNOLOGIE GMBH

Germany

As a system partner we develop, manufacture and supply customer-specific production technology worldwide as original equipment manufacturer. Our trademark includes flexible assembly systems, laser systems and systems for electrochemical metal processing for the automotive industry, electrical engineering/electronics, medical technology and alternative energy technology. For years, SITEC systems for the automotive industry have been used to fully automatically assemble and laser process high-pressure pumps, water pumps, oil pumps, shift forks, steering systems, camshaft adjusters, stators/inverters, piston rods and components for battery systems and fuel cells such as cell connectors, battery terminals or bipolar plates. In the field of medical technology, industry-compliant systems for the assembly and, in particular, laser micromachining of membranes, implants and surgical instruments are developed and built. In parallel to mechanical and plant engineering we have been producing assemblies and components for customers in the automotive industry in certified quality according to IATF 16949 for many years. Synergy effects result from our technological competence and tailor-made mechanical and plant engineering.

Website See all products
BADE UND RINSCHEID METALLWARENFABRIK GMBH

Germany

We process belt and sheet material from 0.2 to 6 mm sheet thickness. We have invested in optimised machine units especially for processing aluminium strips, but not only for this purpose. Automatic punching presses, hydraulic presses and eccentric presses with pressing forces up to 3150 kN process belts/coils up to 600 mm wide. Tight dimensional tolerances, high flatness requirements and other technically demanding quality features are produced by us and partly controlled "in line". With our cleaning systems, which use organic, CHC-free cleaning agents in an environmentally friendly manner, we are also able to meet special cleanliness requirements – based on current standards for residual dirt identification. Through responsible management, we ensure that high quality standards – based on customer requirements – are achieved. Flat structures ensure careful, target-oriented and fast implementation of our customer orders.

Website
SKS METAPLAST SCHEFFER-KLUTE GMBH

Germany

SKS metaplast: Your point of contact for construction plastics, extrusion & masks. With a global reputation as an innovative manufacturer of air pumps and mudguards for the bike market, SKS is now applying its expertise in the field of plastics processing to other sectors: The automotive, sanitary, home services, construction and electrical industries. Even in the early stages of each project, we see ourselves as a competent and active service partner to help customers optimise and achieve their objectives. From the initial concept, through construction, analysis of components, selection of materials, and manufacture of prototypes, to testing of components and quality control, we are a partner who knows its trade. SKS produces high quality plastic parts with the knowledge that they can be used to save energy and raw materials and make a contribution to a sustainable quality of life. Since 2020, SKS has also been producing reliable disposable face masks in Germany.

Website
INNOCOSO GMBH

Germany

The name Innocoso stands for "innovative connector solutions" – our customised connection solutions. But Innocoso GmbH is more than just a professional plug manufacturer. We consider our customers' wishes and problems as our own. With all our competences in the area of connectivity, we see recognising all potential difficulties as a priority and challenge. We provide a perfect fit solution – supporting you from the concept, design, simulation and testing to the final product. In addition to our standard products, our connector specialists will support and advise you when creating your tailored products in the closest collaboration with us. Our manufacturing facility is certified according to ISO 9001 and IATF 16949. Thanks to the modern and flexible production processes, we supply extremely high-quality and reliable products in a wide range of industrial and automotive areas.

Website
ÖZTUG ENDÜSTRI VE OTOMOTIV A.S.

Germany

Vision – we create our products with our lean production management on a global platform, by manufacturing small and medium-sized plastic, rubber and wire parts, plastic injection moulding, rubber vulcanisation and CNC wire-bending processes that our company performs in the industry for research and development plans, and which provide a high level of customer satisfaction. Mission – maximisation of our technology and design skills with regards to understanding overall quality and continual improvement, in order to lead the sector by providing unbeatably effective and efficient service. In an increasingly globalised world, to guarantee consistent satisfaction for all our stakeholders as one of the leading export companies in its field with the help of a streamlined waste-free strategy. Öztug works with the following sectors: Automotive industry. Aftermarkt. Aviation. Defence industry. Construction and furniture industry.Other industries. Tool manufacturing: Plastic injection moulding tools. Rubber tools. Metal tools. Test gauges. Welding equipment. Assembly equipment. Design and construction of special-purpose machines. Tool surface polishing. Research for improving customer satisfaction with value stream analysis ( VSM – Value Stream Map )

Website
EDAG ENGINEERING GMBH

Germany

Shaping mobility and the manufacturing plants of the future. Climate protection, digitalisation and globalisation are fundamental upheavals for the automotive industry. Politics and society expect innovations – intelligent mobility and extensively networked "thinking" traffic concepts, but also resource-conserving and efficient manufacturing. Throughout our company history, we have consistently proven that we have the know-how, the tempo and the agility to develop the innovations that are required. We are your reliable engineering partner in all phases of the product development process (PDP) and for the planning, design and implementation of flexible manufacturing plants. Independent, innovative and global. With the expertise of more than 50 years of vehicle development, we assume responsibility for the complete understanding of product and production. You also benefit from our great innovative strength in our Competence Centers.

Website
MPI EUROPE GMBH

Germany

The MPI family of companies (Managed Programs and Performance Design) is a global product design, development and manufacturing company, supplying composite engine, automotive and marine components. We design and manufacture, among others, intake manifolds, valve covers and oil pans. MPI Europe also has many years of experience in e-mobility, medical technology and consumers. Our focus in Europe is components sensitive to warpage (e.g. coolant tanks, scoops) and complex assemblies (with 2K parts and kinematics, e.g. air-conditioning systems) We use our design expertise in prototypes and series production of plastic and carbon fibre components to offer high value to low- and medium-volume OEM, Tier 1, performance and motor racing customers. We offer European and American customers a convenient logistics concept with local tool sampling, part production and project management with technical communication in German or English.

Website
ETH MESSTECHNIK GMBH

Germany

Welcome to ETH-messtechnik gmbh, your leading partner for precision torque sensors and custom measurement technology solutions. Since 1987, we have stood for outstanding quality, continuous innovation and a comprehensive range of products, including torque transducers, torque measuring equipment, torque testing systems, custom sensors, elastomer couplings and electric force sensors. Our strength lies not only in the wide range of standard products we offer, but also in our ability to develop custom solutions to meet the specific requirements of our customers. We work closely with our customers to create custom test facilities that meet the most stringent of demands. We have expertise in range of industries, including mechanical engineering, the automotive industry, test benches and robotics. Precision measurement of torque in industrial applications is crucial for ensuring productivity and performance. Advanced products are not all that we offer at ETH-messtechnik, we can also provide a comprehensive consultancy service. Our experienced staff will help you select the optimum torque sensor for your application. We rely on in-house production of mechanical and electronic components to ensure the highest quality standards. You can put your trust in our decades of experience, our modern production technologies, and our dedicated service.

All the products for "tubes for the automotive industry"

Torque sensor "DRFS ¼"

Website See all products

F.EE GMBH AUTOMATION

Germany

Founded in 1982, the F.EE group currently employs about 1, 100 staff and is the German market leader in the field of production and automation technology. In addition to the head office in Neunburg vorm Wald, Bavaria, the company has branches in Frankfurt and Leipzig as well as international sites in China, Great Britain, Croatia, Mexico, Spain, Turkey and the USA. With its four business divisions of Electrotech Engineering, Automation Robotics, Informatics & Systems and Energy Technology, F.EE provides highly successful, made-to-measure solutions as well as products and services tailored to specific customer requirements in the fields of automation technology, robotics, switch cabinet construction, electrical engineering, informatics and industrial software. The corporate group is renowned worldwide for its best-practice automation and production solutions. In addition to the automotive and supply industry, F.EE's customers include medium-sized companies in a wide range of sectors as well as energy providers, municipalities and power plant operators.

Website
TAMPOPRINT GMBH

Germany

TAMPOPRINT GmbH, a medium-sized German mechanical engineering company, is an innovator and an established supplier of system solutions for industrialized process-engineering printing solutions. Across industry sectors, TAMPOPRINT offers trendsetting marking and labeling technology for a fast and reliable product individualization. The product portfolio includes pad printing machines and automations, laser systems as well as consumables and accessories for pad printing. The smart combination of pad printing and laser technology completes the portfolio. The customer's requirement for an all-round service and applied innovation is the main focus here. Our range of services includes everything from joint process development and optimization through to process solutions and technical implementation. Our core competence lies in the harmonious interaction of process technology and all pad printing system components, whereby the original TAMPOPRINT labeling solutions are characterized by an exceptional durability and maximum process stability. Sophisticated service concepts with regular check-ups ensure maximum production reliability for our customers. With us by your side, we will find your solution.

All the products for "tubes for the automotive industry"

Applications for the automotive industry

See all products

Find quotes for

Filters

Results for

Tubes for the automotive industry - Germany

Number of results

22 Companies