Results for

Service Provider - Laboratory systems

33 Companies

43 Products

Product recommendations

Turkey

Germany

Germany

See more products

IPC PROCESS-CENTER GMBH & CO. KG

Germany

IPC Process Center GmbH & Co.KG offers the service of improving your bulk raw materials and products. We refine powders, granulates and pellets for a wide range of applications. In our qualified contract facilities, we process e.g. liquid preparations into solids, agglomerate powder mixtures, apply functional coatings and much more. In each case, these are individual, tailor-made bulk materials on customer order. Together with our clients, we develop such products in our technical lab in order to produce them at a later date in one of our 6 contract plants. As a contract manufacturer, IPC specialises in the following technological processes: - Fluidised bed agglomeration - Fluid bed coating (aqueous and hot melt) - Spray granulation (continuous fluid bed operation) especially the possibility to use the spouted bed process - Wet granulation in an intensive mixer - Low pressure extrusion (basket extruder) Production is completed with testing and product release in the chemical-physical laboratory. Our qualified ERP system guarantees one hundred percent traceability of all raw material movements from the receipt of raw materials to the dispatch of finished goods. Our production facilities and expertise are available to customers in the food, animal feed, pharmaceutical, cosmetics and chemical industries.

Website
BOLTIC

Belgium

Boltic is a European optical sub-assembly testing laboratory and test system service solution provider dedicated to telecom and datacom applications. At Boltic, we use our technical expertise in the industry to conduct in-depth analysis and extensive measurements on key components that constitute a network. In addition, we also propose a test system software solution enabling test equipment interconnectivity and automation to ease the operation and management within telecom/datacom testing laboratories. Our services include: - Interoperability testing - RMA - NPI - Test System Service Solution - Laboratory Operating System We operate in a highly-controlled environment where our infrastructures are ESD safe and our cleanroom is ISO class 5 certified to ensure the highest quality standards throughout our services. ISO/IEC 17025 (General requirements for the competence of testing and calibration laboratories certification) in progress. We are equipped with the latest technologies available on the market by partnering with well known OEM test vendors to ensure the heterogeneity of our measurements. We also propose additive manufacturing and quality control services: - 3D Printing - 3D Scanning Do not hesitate to visit our website or contact us directly for additional information.
THE INGENIOUS AIR COMPANY (HI-VELOCITY UK LTD)

United Kingdom

The Ingenious Air Company is the only UK distributer of the Toronto, Montreal and Vancouver Hi-Velocity systems. Hi-Velocity is a draught-free and discreet, modular indoor air quality system providing heating, air conditioning, ventilation, air purification, de-humidification, humidification and de-stratification all in the one system. It eliminates draughts and creates the perfect indoor environment for any commercial, industrial, retail, leisure, residential, healthcare or laboratory application.The system improves indoor air quality by using a constant, undetectable air movement pattern, creating comfortable, even temperatures throughout the entire room with no draughts or hot or cold spots. All three systems use pressure to move air to where it is needed via a series of unique, small diameter ducts positioned discreetly in walls, ceilings and floors.The Hi-Velocity system operates with all sustainable energy sources including heat pumps, solar and high efficiency gas boilers.
COVUE INC

United States

COVUE, through our Laboratories and field service businesses, offer advanced technical services for after-sales service support, contract manufacturing and assembly and, engineering and prototyping solutions throughout global markets to medical device manufacturers. Our technical service encompass a broad range core and emerging technologies in surgical robotics, R/F (radio frequency) MRI Coils, high pressure fluid delivery systems, acoustic transducers (ultrasound probes and arrays) and, diagnostic imaging and blood laboratory systems. Our after sales service provides manufacturers’ operational infrastructure and resources in markets without the associated upfront cost. With ISO certified centres globally and scalable services to meet any project objective, COVUE delivers an unparalleled dedication to quality service and customer satisfaction.
ALL TEMP MECHANICAL CONTRACTING AND CONSULTING LLC

United States

Forced air system replacement / repair, boiler replacement / repair, ductless mini-split heating & cooling installation / repair, customized duct sizing & installation, welded kitchen / laboratory ventilation system, cooling towers, fresh air / make-up air systems, indoor air quality (HRV & ERV) systems, electronic air filteration units, steam and bypass humidifier, oil to gas conversions, natural gas piping, controls and control wiring, maintenance contracts for heating systems and air conditioning

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

AIK GROUP

Spain

CE market management systems. Laboratory, calibration, tests, production developments. Advice on internationalization, knowledge management and training. APP PLUS, AENOR, NORMA ISO, ISO, TUV, IQ NET, SPRI, ICEX, DNV.
PRUTSCHER LABORATORY SYSTEMS

Austria

The company PRUTSCHER LABORATORY SYSTEMS, is a Manufacturer/ Producer, which operates in the Pharmaceuticals - basic and auxiliary products industry. It also operates in the Pharmaceutical products, Furniture, household, Furniture and shelving, office, Factory fittings, Pharmaceutical products, Furniture, household, Furniture and shelving, office, and Factory fittings industries. It is based in Neudörfl, Austria.
DHD CLEAN PARTS GMBH & CO. KG

Germany

DHD Clean Parts GmbH & Co. KG was founded in November 2017 after the separation of DHD Technology GmbH & Co. KG. DHD Clean Parts GmbH & Co. KG's key area of expertise is industrial parts cleaning. In addition, DHD Clean Parts GmbH & Co. KG also runs a laboratory for residual dirt analysis. This is where testing to ensure internal quality assurance is carried out, as well as testing on behalf of our customers. This laboratory acts completely independently of the company's other business activities. Our customers are in the automotive industry, as well as their suppliers, the electronics and electrotechnical industry, the heating systems and heat technology sector, mechanical engineering, environmental and process engineering and many more sectors of industry.

Website
CRB ANALYSE SERVICE GMBH

Germany

You can find a reliable partner to precisely analysis asbestos and solid matter in CRB Analyse Service GmbH. As a purely analytical laboratory, we do not undertake building inspections or perform sampling and we are not conduct verification activities. We are only interested in your samples, not your customers! We are a private, independent and accredited testing laboratory with over 25 years of experience. We provide the follow laboratory services, among others: Asbestos analyses in accordance with current standards/guidelines, testing for WHO fibres, X-ray microanalysis on SEM, X-ray fluorescence analysis (XFA), carcinogenicity index (CI) identification, excellent analyses guaranteed – fast and reliable. We also offer both short-term analyses and large sample series, maximum analysis quality – confirmed in many interlaboratory tests, LIMS-controlled sample management, preparation and test reports in compliance with standards, convenient online ordering system via business customer portal, framework agreements are possible and welcomed!

Website See all products
HORGES GMBH LAGERTECHNIK

Germany

We are a manufacturer that supplies high-quality steel shelving at low prices. We have been operating as a manufacturer of high-quality shelving systems for over 25 years. We provide quality-tested steel shelving, storage shelves, compartment shelves and filing shelves for warehouses, workshops and archiving. Our shelving is available galvanised or with plastic coating. We develop solutions for clients in industry, commerce, trade and archiving. We design both bolted and boltless shelving to your specific requirements and usually dispatch it within 48 hours. We can provide you with special shelving solutions for storing almost any kind of material. We are also happy to plan your entire storage area. Our product range includes: Archive shelving, storage shelves, special shelving for a variety of applications, heavy-duty shelving systems, shelving systems and stainless steel laboratory shelving.

Website

AUFBEREITUNGSTECHNOLOGIE NOLL GMBH

Germany

NOLL GmbH processing technology, based in the town of Bobingen in southern Germany, specialises in dry milling and processing bulk materials in the ultra-fine range, i.e. micron and nano powders of 2–20 µm. NOLL's engineering solutions enable customers all across the world to use milled powder in qualitatively new dimensions for specific applications in the circular economy, pioneering environmental technologies and future products. The company's range includes multi-functional systems, mills and separators, ranging from compact laboratory machines for the smallest volumes for research and development purposes to large systems for industrial processing of tonnes of materials

Website
PROGENUS

Belgium

Progenus, a Belgian company that specialises in working with DNA, stands out thanks to its innovative scientific approach. Our work covers four key areas: research, analyses for the agrifood sector, the production of analysis kits and analyses for animals. Our mission is to provide clients with a reliable, affordable and high quality scientific environment to assist them with their innovative projects and to perform custom DNA analyses. Our communications with all our clients are clear and easy to understand, anticipating risks to work for a safer world. Our laboratories are fitted with the most up-to-date technologies and comply will all quality requirements for molecular biology. We offer sequencers, real-time PCR apparatus, robotised DNA extraction systems, etc. Feel free to contact us for more details!

Website See all products

Product recommendations

Switzerland

E4/00 The E4.1 predecessor for quiet operation and easy assembly Series 210

Germany

Germany

Germany

See more products

BAUFENS

Bosnia and Herzegovina

Baufens is a manufacturer of PVC profiles, panels (inox, PVC and Alubond), PVC sheets, window sills, wooden doors, finished carpentry such as PVC windows and doors, PVC & ALU roller shutters. The company was founded in 2005 and since then has been a respectable competitor in the PVC market. We achieve this by introducing new products into the range, following construction trends, certifying products in authorized laboratories, constantly educating employees and selecting suppliers who drive the same values. All products are certified and CE marked. Our priority is client’s satisfaction, which we provide through the guaranteed quality of Baufens products by using the latest technic machines and molding system, by producing finished windows and doors according to the wishes of our clients. We are producing 6 systems of a different profile series (8500, 7600, 7000, 6000 series, Unique slide and Basic slide systems). We are exporting PVC products and finished joinery to over 40 countries all over the world. Baufens products are high performance and proven durability, profiles are tested and verified by the best German testing institute (IFT Rosenheim). Baufens is undeniably the highest quality PVC profile on the market. We also offer an unparalleled choice when it comes to styles, colors, and glazing options to complement any home. Our products serve a variety of purposes and functionality: structural integrity, improved energy efficiency, water protection, decorative space.

Website See all products
HERRMANN ULTRASCHALLTECHNIK GMBH & CO. KG

Germany

Herrmann Ultraschall is a world leader in ultrasonic welding with five decades of expertise. With our 360 ° ULTRASONIC ENGINEERING we offer customer-specific support from concept to production and after-sales support. For our customers we are both consultants and solution providers for welding projects. Through our global network, we have ultrasonic laboratories in 18 countries to support you locally. Ultrasonic welding is joining without gluing, screwing or heat input from outside. As an economical production process with fast cycle times, it offers high process control and reproducible quality. We offer suitable platforms for a variety of applications: - Ultrasonic welding systems for thermoplastic parts - Ultrasonic sealing systems for packaging - Ultrasonic joining systems for nonwovens and foils - Ultrasonic welding systems for non-ferrous metals like aluminum and copper Our ultrasonic technology is used in many industries, such as medical, automotive, packaging, hygiene and energy storage. Our state-of-the-art machines and systems meet all the requirements of modern Industry 4.0 production, whether manual workstation or automation, and thus stand for high efficiency and sustainability.

See all products
EP EHRLER PRÜFTECHNIK ENGINEERING GMBH

Germany

EP Engineering GmbH supplies a complete range of products and services in the metrology and testing technology field, specialising in high-precision flow measurement technology. As a complete service provider, we offer customers the highest quality, supplying test benches, measuring systems, software solutions and calibration and service. We are one of the few companies in Germany to own and operate a DAkkS (German Accreditation Body) laboratory. In order to further develop current standards and measuring methods, we conduct research with our partners to identify new paths in metrology and testing engineering for gases and liquids, and maintain close cooperation with the Physikalisch-Technische Bundesanstalt (PTB) (national metrology institute) in Braunschweig.

All the products for "laboratory systems"

Flow Calibration - Gas Bell Piston

See all products
YOUNG CALIBRATION LTD

United Kingdom

The Young Calibration laboratory provides UKAS accredited calibration services with a reputation for quality, cost effectiveness, impartiality, and reliability. The company has experience in Flow Calibration Services, Calorimetric Heat Exchanger Testing, UKAS Air Flow Calibration, UKAS Fluid Flow Calibration, UKAS Air Velocity Calibration, Component Cleanliness, Component Durability and Thermal Fluid system testing. The Calibration Laboratory houses traceable and UKAS accredited flow rigs, for gas flow, air flow, water flow, oil flow, fuel flow, air velocity, pressure, oxygen clean pressure calibration, temperature, humidity, electrical, mass, torque and acceleration. The Thermal Fluids Test Laboratory houses calorimetric heat exchanger wind tunnels and component test rigs for burst, ageing, acid resistance, thermal cycling, thermal shock, pulsation, pressure cycling, altitude, corrosion, erosion, SWAAT, vibration, bump, leak, flow vs dP, hot soak and cold soak. The Component Cleanliness Laboratory tests to ISO 16232 standard, with washing, flushing, flow benches, extraction and analysis. Particle analysis can be conducted using a range of analysis techniques and instrumentation from online optical particle analysis, microscopic analysis, UV Spectrometry and FTIR.

All the products for "laboratory systems"

UKAS Calibration Services

See all products
CALIA

France

Calia enables the condition of your lubricants and wear level or your equipment to be determined in order to cut down on oil changes and anticipate maintenance servicing. We have established analytical parameters to support your decisions regarding lubricant purchases and maintenance servicing. We also analyze heat transfer fluids and fuel. Analyses and results are available within 3 days commencing arrival at the laboratory. Reports are sent to you by message service. CALIA's structure is based on the use of high-performance equipment to monitor samples, from the moment they arrive at the laboratory to drafting the analysis report. Business development is handled to ensure it remains a "people-friendly" service company.The 6-person team includes chemist-technicians, a laboratory manager, a sales manager, executive director and quality control manager. We achieved ISO 9001: 1 2013 quality management system certificate on 1st February 2013.
EUROFINS BLC LEATHER TECHNOLOGY CENTRE LTD

United Kingdom

Eurofins | BLC Leather Technology Centre Ltd. (Eurofins | BLC) is a world-leading technology center and testing laboratory based in Northampton, United Kingdom. Eurofins | BLC holds accreditations from UKAS, CPSC, and ILAC, and has auditors approved to carry out LWG audits. Established for over 95 years, Eurofins | BLC provides a complete range of supply chain services to the leather industry, covering all areas from raw material through to finished product. Eurofins | BLC works closely with brands, retailers, product manufacturers and tanneries in many countries around the world. As the only laboratory dedicated to leather, footwear, chemical, and leather product testing, Eurofins | BLC has the technical pedigree to ensure fast and accurate solutions to technical, environmental or management problems in the leather supply chain. Eurofins | BLC Leather Supply Chain Services: •Chemical & Physical Testing •Fault Diagnosis & Problem Solving •Consulting & Auditing •Chem-MAP – Chemical Verification Systems •Membership •UK & International Training •Sustainability •Research & Innovation For more information about Eurofins | BLC products and services, visit www.blcleathertech.com or contact Eurofins | BLC directly to discuss on +44 (0)1604 679999 or email info@blcleathertech.com.
HÄRTEREI REESE BOCHUM GMBH

Germany

EXPERTS IN HEAT-TREATMENT. The REESE Group comprises four centres for hardening technology located in Bochum, Brackenheim, Chemnitz and Weimar, was founded in 1948 and continuously developed to become what it is today – an innovative, owner-run, medium-sized company with approximately 240 employees. With 200 systems for the thermal treatment of steel and other metal materials, HÄRTEREI REESE offers its international customers a comprehensive spectrum of procedures. On request, we can provide customer-specific design and production consultation through our own engineers and technicians. Thanks to our sophisticated system, control and measuring technology, perfectly suited to workpieces with large dimensions or unusual geometries as well as small parts in series production. We also offer hardness tests in our own metallographic laboratory. And of course, our quality, environment and energy management systems are all certified.
FRANKE INDUSTRIE AG

Switzerland

The original line of products manufactured by Franke Industrie AG ranged from dyeing machines for laboratory tests in the textile industry, through to letter boxes and engine components. One particularly significant milestone was the manufacture of the after burner (ATAR 09C) for the Mirage fleet of the Swiss Air Force in the 1960s. Some of the first milestones include: The combustion chamber for the Goblin 3 engine (in the BEA Vampire fighter jet), the after burner system for Snecma ATAR 09 C (in the Dassault Mirage III fighter jet) and the Avon 203/207 Hunter exhaust pipe. The products required considerable technical knowledge, not only in terms of manufacture but also in metallurgy and process reliability. The high-quality nickel- and cobalt-based materials used opened up new potential – or in other words – new customer segments.

ILUMTECH

Slovakia

iLumTech provides solutions to other manufacturers of lighting fixtures that cover everything from the concept to the final product, within the framework o which we deliver a wide range of services across industrial, optical, thermal, electronic and mechanical design, all of which are supported by excellent supply chain management, full system testing and prototyping. iLumTech has some of the best equipped in-house laboratories in Europe, therefore can provide customers with an array of tests side-by-side with the other services. These services include optical laboratory, thermal laboratory, electronic laboratory as well as mechanical testing. Under the brand “Connected Lighting” iLumTech presents several lighting control components (fully DALI compatible) for small and middle size installations. All of these devices have the common aim: to deliver to customers the most often functions from the intelligents lighting management products for a reasonable price with an easy installation.
COSMETEK

Portugal

Located in Portugal , COSMETEK is a company that specialises in providing excellent services in terms of quality control and characteristics of products as well as in research and development (R&D) of cosmetic products. Cosmetek offers several services appropriate to the evaluation of quality, conformity, safety and performance of cosmetic products. Laboratory trials: Stability tests (accelerated aging), product compatibility tests, determination of PAO (period after opening), microbiological quality, challenge test and sun test). Quality Management System: Implementation of a quality management system, GMP (Good Manufacturing Practices), advice on ISO 22716 certification). Regulatory Services: Elaboration of Technical Data Sheets /MSDS, conformity assessment, elaboration of the PIF and notification to the CPNP and monitoring of the update of the applicable legislation at European level. Research and Development: In partnership with universities and research centers, Cosmetek enables the use of new active ingredients of interest, on customised cosmetic products. Especially valued are the natural resources of vegetable origin and characteristics of the surrounding geographic area. Do not hesitate to contact us for more information.
G. LUFFT MESS- UND REGELTECHNIK GMBH

Germany

Lufft Mess- und Regeltechnik GmbH develops and manufactures professional climate and environment measuring components and systems. Meteorological services and environmental agencies as well as building services and electricity suppliers value the precise quality that Lufft provide. Quality standards are emphasised by the use of their own calibration laboratory (DKD/DakkS). One feature of this laboratory is, amongst others, an accredited wind channel in which all wind sensors are fully checked prior to delivery.
ELEMENT MATERIALS TECHNOLOGY SHEFFIELD LTD

United Kingdom

UKAS calibration of force proving devices from 0.1N up to 500kN Calibrations to UKAS agreed procedures with an accuracy of up to +/- 0.02%ISO/IEC 17025 UKAS accredited laboratory offering a flexible customer service with personal points of contact to meets our customers’ needs. One of a few UK laboratories offering calibration to BS EN ISO 376. We calibrate: • Load Cell• Load Column• Proving Device• Force Gauge• Crane Weigher• Load Link• Weighing Kit• Topple TesterUsing the best direct loading metrological systems, where force is generated directly by the applied mass (dead weight) in the earth's gravitational field. Other types of force devices upon request. Traceable calibration available up to 200T
ALNICKO DEVELOPMENT

Ukraine

Alnicko Development designs IoT, industrial and consumer electronics. The company also develops embedded software. Company targets the lower-middle market where has a reputation of research laboratory for solving the most difficult challenges. Alnicko Development has expertise in multilayer PCB design, motherboards on multi-core processors, wireless technologies (Zigbee, WiFi b\g\n\ac, Z-wave, NFC, GSM, NB-IOT), video processing circuits, optics, systems with autonomous power supply (Li-ion/Li-pol elements), wireless Qi energy transfer, external energy harvesters.
QUAZAR SOFTWAREENTWICKLUNGSGESELLSCHAFT MBH

Germany

IMAGE DATA BANKS FOR MEDICAL APPLICATIONS: E.g. DicomView and DicomView Net in the heart catheterisation laboratory. IMAGING SOLUTIONS IN BROADCASTING: E.g. Media Department advertising film archive (Kraft Jacobs Suchard). OEM SOFTWARE SOLUTIONS FOR HARDWARE MANUFACTURERS: E.g. UPS control software (Siemens, AEG, etc.). SOFTWARE FOR THE ENTERTAINMENT INDUSTRY: 'Bierbörse' gastronomic event (Berlin and Hamburg). We are also an official Novell Professional Developer and a member of the Microsoft Developer Network. We use the system platforms Windows, Windows NT, UNIX, DOS, Novell and OS/2. We mainly develop software in C/C++, but system-oriented developments in Assembler are equally no problem for us. We work in traffic monitoring (flash unit control for ESW), measuring data recording and processing (UPS control), image transfer, the medical industry and security technology.
ENERGCO

Turkey

Energco is leading company in electrical energy sector. We provide professional training, consultation and installation services for projects related to electrical and Renewable energy. We mainly focus on the resources that have the hugest impact in our Energy security as Photovoltaic, waste to Energy and Wind. Energco provides professional consultation in Renewable energy integration sector. Our services include but not limited to: feasibility study for Photovoltaic, waste to Energy and wind power plants, equipped the power systems and renewable energy laboratories, set policies for integrating renewable energy in conventional electrical grids, and suggest the recent research trend in renewable energy for research centers.
AREVITA

Lithuania

UAB Arevita company was founded in 1994.02.10 and developed from the very beginning by a professional and enthusiastic team of information technology specialists and engineers. The main activity was the sale and installation of the security systems. In 2010, using European Union structural funds, we expanded UAB Arevita activities by electronic equipment design and manufacture and also opened a research laboratory. Today we are a group of five companies: UAB Arevita, UAB Arevita ir Ko, UAB Spectra Baltic, UAB Paradox Distribution Center, and UAB Parksol Technologies. UAB Arevita team creates, projects, develops and installs intelligent solutions for building management, engineering networks. We are gaining a foothold in the world with Parksol parking guidance systems. UAB Arevita ir KO manages and develops real estate. AREVITA GROUP - engineering for easy living! Our vision is to be an engineering company that creates solutions for smart cities, providing high value-added products and services by employing proven and new electronic technologies.
EGE TEST EUROPEAN KFT.

Hungary

Testups offers laboratory testing services, field evaluation, technical assistance and certification for a wide range of industries across the Europe, Ireland, UK, Hungary, Russia, Turkey and USA. We are offering knowledge and technical expertise, and providing accredited EMC, radio/RF, product safety, automotive, medical testing services. Our services will fulfil your product approval requirements of many countries around the world.Testups also offers equipments and test chambers for EMC and RF test laboratories. We are offering turnkey solutions including test software, engineering, training, installation, validation, calibration, delivery and transportation. Some of the items we deliver are: Absorbers, Amplifiers, Anechoic Chambers, Antenna Masts, Antenna Positioning Systems, Attenuators, Baluns and Transformers, Bulk Current Injection (BCI) Probes, CDNs (Coupling / Decoupling Networks), Comb Generators / Noise Sources, Current Probes / Current Clamps, Electric Field (D-DOT) Sensors, EM Coupling Clamps, EMI Receivers, EMI Filters, EMC Antennas, ESD Guns / Simulators / Generators, Fiber Optic Links, Field Probes, GTEM Cells / TEM Cells, Harmonics and Flicker Analyzers, LISNs, Magnetic Field Generators, Magnetic field (B-DOT) sensors, Near Field Probes, Near Field Scanners, OTA (Over The Air) Test Chambers, Passive Integrators, Emission Test Systems, Vector Network Analyzers (VNAs), Signal Generators, Spectrum Analyser, Screened Rooms, and Surge & Burst/EFT Generator

See all products
PROCERT LABORATORY S.R.L.

Romania

PROCERT LABORATORY is an active Romanian certification body accredited by RENAR – national accreditation authority - providing professional, friendly, adding-value and cost effective assessment services for organizations needing to objectively demonstrate meeting International Standards ISO 9001; ISO 14001; OHSAS 18001; ISO 22000; ISO/CEI 27001; SA 8000; EN 16001; ISO 28000PROCERT LABORATORY has developed a partnership with Network Lavoro Etico - for certification services under SAAS accreditation, for social responsibility management systems according to SA 8000 and BSCI.In November 2009, PROCERT LABORATORY became an E.F.Q.M. member (EUROPEAN FOUNDATION FOR QUALITY MANAGEMENT).All our evaluators are senior auditors with years of experience in quality, environment, health and safety management, social accountability, auditing and training in a large range of industries.Our long term policy is to be able quickley to respond to our customers’ newest requirements.