Pumps- hydraulic - Import export

The pumps of the 3 series deliver operating pressures up to 250 bar and volumetric flow rates of up to 400 l/min and are the preferred choice in channel and tube cleaning applications.The seal system of this plunger pump is very easy to maintain due to fewer wearing parts. The ceramic plungers used are highly resistant to acid and alkaline liquids.

The ARP (Abrasive Resistant Pump) series was developed specially for the conveyance of water contaminated with grainy or fibrous solids. The ARP highpressure pumps deliver operating pressures up to 400 bar. The pumps also work reliably at a solids concentration of up to 3,000 mg/l and a grain size of up to 300 μm.

The highpressure pumps of the 2series with operating pressures up to 750 bar and volumetric flow rates up to around 230 l/min are ideal for cleaning pipes and tube bundles, containers and containers.The seal system of this plunger pump is very easy to maintain due to fewer wearing parts. The ceramic plungers used are highly resistant to acid and alkaline liquids. The 2series impresses with a good price/performance ratio due to long service lives – even in rough everyday work.

With operating pressures of up to 1,000 bar, the Yseries pumps are ideally suited to a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning. Due to the small size and low weight, they can be easily installed in unit with very small base frames.

The highpressure pumps of the Z series deliver operating pressures up to 1,500 bar. With a high number of pressure and nominal flow rate combinations, the pumps are preferably used in industrial cleaning, paint stripping and also in descaling.For pumps with an operating pressure of more than 1,000 bar, hard metal plungers are used, which are particularly stable in order to guarantee a long service life and thus low maintenance costs.

With the builtin central valve design, these plunger pumps also have high volumetric efficiencies at high pressures. The carbide plungers used are extremely robust, provide long service life at very high pressures of up to 3,000 bar, and can therefore guarantee low maintenance costs. This makes the pumps of this WOMA series ideal for separating, disassembling, stripping and derusting with high pressure water.

We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Hydraulic Inverters Pressure Transformers

1700-2500 PSI Hydraulic Power Packs for Hydraulic Circuits

7150-10000 PSI Hydraulic Pumps for Double Action Tools

10000 -12500 PSI Hydraulic Pumps for Single Action Tools

Cable cutting unit in several sizes for cutting cables, in case of failure under voltage.

With threephase servo drive sized according to job requirements Machine body in sturdy clean steel plate design Rollers made of highquality 63 RW tool steel, hardened and polished Pneumatic pilot release with parallel lift of upper roller, guided on gear rack Entry catenary rolls Manual edge guides Simple programming of even complex feeding cycles, Display in cleartext Manual functions for setup such as creep speed, jog mode, single feedtolength Simple memory and recall of job programs for quick changeover Mounting bracket with height adjustment via spindle or hydraulic handpump (optional motorized) Hard chromed or polyurethane coated rollers (optional with Topochrome coating for highgrip feeding) Measuring wheel system for highest feeding accuracy Stroke limitation for faster piloting Fine adjustment of upper roller and strip guiding device for thin stocks (starting at 0,1 mm thickness) Central edgeguides with hand wheel

Submersible pumps with agitator for charged and abrasive mixtures. Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Accessories: High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system Electric pumps are available in 50Hz and 60Hz versions.

Submersible pumps with agitator for charged and abrasive mixtures. Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Accessories: High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system Electric pumps are available in 50Hz and 60Hz versions.

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Possibility of installation on mechanical arm Dredging systems (side excavators or dredging head) available on request Accessories: High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system Pumps are CE certified. UL/CSA certification available

Factory new triplex pump, Triplex 140 model Max flow rate 140 lt / 1 ' Pressure up to 50 bar Drive by hydraulic motor Accessories safety valve pressure gauge with pressure gauge suction pipe

Unlike other brands spa installs wash machine drain pump that is really too small for spa pedicure chair. We designed professional drain pump which can move 20 litter water out of tank within one minute. We also install one way value make sure the waste water won’t return to bowl. Timer built inside the pump too.

Technical data UNI FUTURE with pressure transducer Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg SUPPLIED WITH Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data UNI FUTURE 2050 SCU Also as a drive towards a cutting system Automatic detection with switch-off pressure required for achieving the required operating pressure of 20 bis 700 bar Suitable for all tools with a oil flow to 700cm³ With pressure gauge (1000 bar) and ground connector on the front side With pressure sensors for advanced features Detection tool with speed adjustment to (tool speed 10mm/sec) BG provision to fulfill Optional jogging for intermittent tool feed. Power adjustable,short time possible to 1,2 kW ch Network and battery (24/230V) Powerful Li-Ionen Battery 25,2 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy spaving mode– 10 minuets after the last activity or to low battery condition, switches off the unit Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatic adjustment to 1l/min Size L/B/H: 222 x 168 x 229mm (Handle height 40mm) Weight: ca. 6,9 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data cube with pressure transducer and lock valve Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Keeps the pressure of max. 850 bar upon actuation of the stop valve Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg The lock valve for pipe crimping tools prevents reduction of oil pressure in the tool. So it is possible to hold hydraulic pressure over not time limited space. Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data ED 100 To drive the nitrogen charging apparat «SL 230 SLG» and all crimping and cutting tools. Designed for continuous use Maximum pressure: 850 bar Delivery volume: up to 0,8L/min Fitting to all tools with oil demand up to 700cm³ Shiftable automatic detection of pressure requirement with switching off at the Essential working pressure from 20 to 850 bar Built in pressure sensor for improved functionality and enhanced adjustment Inching function for interrupted tool infeed Robust housing, operating elements and coupling are built in secured under body top Weight: ca.14 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Tool bag for hydraulic power unit Uni Future 2050 High strengh grey polyester-woven fabric Waterproof > 0,2 bar High scouring resistance Protect your tools from external environmental influences (Dirt/Dust) Overall space-saving storage Easy handling Low weight DIMENSIONS: 350 x 280 x 300 mm

Metal-free high pressure hose with quick coupling set and dust cup for coupling Length: 2m

Dust caps for hydraulic quick release couplings. To protect against damage and contamination of couplings and nipples.

Dust caps for hydraulic quick release couplings. To protect against damage and contamination of couplings and nipples.

Pressure gauge to check the working pressure to 1000 bar For use when used as a safety cutting system or monitoring purposes

with PUR-insulation usable from -40°C to +90°C

complete for hydraulic unit Uni Future 2050