Pumps - Import export

The ViscoMT-L 3 / 18 barrel emptying system offers a modern way of emptying containers.The connection with the ViscoTec VMP dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 50 l to 300 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - removal of materials loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

▪ Continuous volumetric and pulsation-free dosing regardless of viscosity ▪ For low viscosity and self-levelling materials (e.g. trickle resins) ▪ Low wear solution due to avoidance of material contact at shaft seal ▪ Uninterrupted production thanks to material reservoir with up to 350 ml usable volume ▪ Pressure and temperature sensor including sensor holder at pump outlet ▪ Level programmable using analog level sensor ▪ Filling under atmospheric pressure ▪ Optional connection for process gas (max. 0.2 bar pressure) ▪ Dispenser holder for easy and stable installation ▪ Increased process reliability due to integrated safety device ▪ Dividable rotor assembly for easy & fast replacement and low spare part costs

The ViscoTec dosing and filling pump RD-Hygiene for food and cosmetics is a volumetric pump based on the continuous piston principle. It is ideally suited for discontinuous or continuous pulsation-free dosing of viscous, structure-sensitive and solids-laden media. Thanks to the high-quality ViscoTec dispensers, high-precision dosing applications can be realized in the food and cosmetics sector. The systems are used e.g. in the bakery and confectionery sector for decoration. Typical doses are icing or fondant, but also fillings such as vanilla or chocolate cream. Your advantages: - Specially adapted filling tubes for a wide variety of filling applications - Application and dosing in automated systems - Low to high viscosity as well as abrasive, shear-sensitive or lumpy media - hot and cold filling - Optimum results for CIP/SIP (Cleaning in Place/Sterilisation in Place) cleaning

The ViscoMT-XM barrel emptying system with volumetric pump based on the endless piston principle. Your advantages: - for medium to high viscosity products (up to 7,000,000 mPas) - suitable for abrasive, shear-sensitive or lumpy materials loaded with fillers - clean wiping of the inside wall of the barrel due to follower plate with special sealing lip - suitable for cylindrical, ribbed or slightly conical barrels, plastic containers or containers with inliners - no lateral squeezing of the medium, as the follower plate is guided almost without pressure - discharge speed electronically adjustable - easy handling - pulsation-free conveyance/discharge - Residual quantity in the barrel: < 1% - compact design Application: Withdrawal of products directly from the delivery or storage container, e.g.: Tomato paste, honey, fats, icing, mascara and much more. pressure-controlled or level-controlled feeding of the products to filling machines or mixing processes.

▪ Modular setup with five different available dispenser sizes on each side ▪ Static mixing of two materials with same or different viscosities ▪ Adjustment of the desired mixing ratio by adjusting the speed ratio of both dispensers ▪ Volumetric dosing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for abrasive, filled or shear sensitive materials ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Linear relation between dosing volume and rotation speed ▪ Programmable suck-back prevents dripping or stringing of product ▪ Different rotor and stator materials available as standard ▪ Long service life due to application-specific rotor-stator combinations ▪ Easy cleaning and maintenance due to quick assembly and disassembly options ▪ Mixing ratio 1:1 - 100:1 ▪ Volume flow of 0 - 1,300 ml/min (depending on mixing ratio, material and dispenser combination)

Our ecoPEN  XS is a true volumetric dispensing system that applies the smallest amounts of singlecomponent fluids – for highprecision dispensing technology. Thanks to the proven endless piston principle, watery to pasty liquids are perfectly dispensed. A clean, processreliable dosage is achieved regardless of fluctuations in viscosity. - Dimensions (without cartridge and holder): length 178 mm, width 22 mm, depth 65 mm - Weight (without cartridge and holder): 175 g - Operating pressure: 0 - 6 bar - Max. dispensing pressure: 20 bar - Self-sealing: Approx. 2 bar - Viscosity: watery to pasty - Volume flow: 0.0044 - 0.35 ml/min - Min. dispensing quantity: 0.25 µl - Dosing accuracy: ± 1% - Stator material: vidur-C1 - Material inlet: Luer-Lock adapter for cartridge (cartridge can be rotated 360°) / Adapter for hose connection (Ø - 3mm) - Material outlet: Luer-Lock (patented) - Wetted parts: POM / vidur-C1 / stainless steel / HD-PE - Repeatability: > 99 %